11-22/R6G6C-A01/2T [EVERLIGHT]
Technical Data Sheet Chip LED with Bi-Color (Multi-Color); 技术数据表芯片，双色LED （多色）
| 型号： | 11-22/R6G6C-A01/2T |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Technical Data Sheet Chip LED with Bi-Color (Multi-Color) |
| 文件： | 总11页 (文件大小：175K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Chip LED with Bi-Color (Multi-Color)
11-22/R6G6C-A01/2T
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Multi-color type.
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 11-22 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Lens Color
Type
R6
Material
AlGaInP
Emitted Color
Brilliant Red
Water Clear
G6
AlGaInP
Brilliant Yellow Green
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 1 of 11
Prepared by: Ashley Kuo.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Package Outline Dimensions
Red -
+
+
Green -
Polarity 1
0.5
Cathode mark
3.0
2.0
1.8
1.5
1.1
R0.45
For reflow soldering (propose)
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 2 of 11
Prepared by: Ashley Kuo.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
5
Unit
Reverse Voltage
VR
V
R6:25
Forward Current
IF
mA
G6:25
Operating Temperature
Storage Temperature
Topr
Tstg
Tsol
ESD
-40 ~ +85
-40 ~ +90
260 (for 5 second)
2000
℃
℃
℃
V
Soldering Temperature
Electrostatic Discharge (HBM)
R6:60
Power Dissipation
Pd
IFP
mW
mA
G6:60
Peak Forward Current
(Duty 1/10 @1KHz)
R6:60
G6:60
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Soldering Temperature
Tsol
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 3 of 11
Prepared by: Ashley Kuo.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
140
45
Typ.
225
72
Max.
-----
-----
Unit Condition
Iv
R6
G6
Luminous Intensity
Viewing Angle
Peak Wavelength
mcd
deg
nm
2θ1/2
λp
-----
60
-----
R6
G6
632
575
-----
-----
IF=20mA
λd R6
-----
-----
624
573
20
-----
-----
nm
nm
Dominant Wavelength
G6
△λ R6
G6
Spectrum Radiation
Bandwidth
-----
-----
20
Forward Voltage
Reverse Current
VF
V
1.7
2.0
2.4
10
VR=5V
IR
-----
-----
μA
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 4 of 11
Prepared by: Ashley Kuo.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Typical Electro-Optical Characteristics Curves
R6
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 5 of 11
Prepared by: Ashley Kuo.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Typical Electro-Optical Characteristics Curves
G6
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 6 of 11
Prepared by: Ashley Kuo.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 7 of 11
Prepared by: Ashley Kuo.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moisture-proof bag
Label
Desiccant
Label
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 8 of 11
Prepared by: Ashley Kuo.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
Test
Hours/Cycles
Sample
Ac/Re
No.
1
Items
Test Condition
Size
Temp. : 260℃±5℃
Reflow Soldering
22 PCS.
0/1
0/1
6 Min.
Min. 5sec.
H : +100℃ 15min
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 PCS.
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
4
22 PCS.
22 PCS.
0/1
0/1
∫ 10 sec
L : -10℃ 5min
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -40℃
5
6
7
22 PCS.
22 PCS.
22 PCS.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/ 85%RH
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 9 of 11
Prepared by: Ashley Kuo.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 10 of 11
Prepared by: Ashley Kuo.
EVERLIGHT ELECTRONICS CO.,LTD.
11-22/R6G6C-A01/2T
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering
of each terminal. Be careful because the damage of the product is often started at the time of the hand
solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No. : DSE-112-C01
http://www.everlight.com
Prepared date: 22-Sep-2005
Rev. 1
Page: 11 of 11
Prepared by: Ashley Kuo.
相关型号：
11-22SURSYGC/S530-A2/TR8
Dual Color LED, Brilliant Red/brilliant Yellow Green, Water Clear, 1.5mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明