11-22SDRSYGC/S530-A3/E3/TR8 [EVERLIGHT]
Visible LED;
| 型号： | 11-22SDRSYGC/S530-A3/E3/TR8 |
| 厂家： | 
EVERLIGHT ELECTRONICS CO., LTD |
| 描述： | Visible LED |
| 文件： | 总10页 (文件大小：206K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Chip LED with Bi-Color(Multi-Color)
11-22SDRSYGC/S530-A3/E3/TR8
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mulit-color type.
․Pb Free
․The product itself will remain within RoHS compliant
version.
Descriptions
․The 11-22 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Lens Color
Type
SDR
SYG
Material
AlGaInP
AlGaInP
Emitted Color
Super Deep-Red
Super Yellow Green
Water Clear
Everlight Electronics Co., Ltd.
Device No:DSE-112-054
http://www.everlight.com
Prepared date: 07-26-2005
Rev 2
Page: 1 of 10
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22SDRSYGC/S530-A3/E3/TR8
Package Outline Dimensions
Red -
+
+
Green -
Polarity 1
0.5
Cathode mark
3.0
2.0
1.8
1.5
1.1
R0.45
For reflow soldering (propose)
Notes: Tolerances Unless Dimension ±0.1mm , Angle±0.5°,Unit = mm
Everlight Electronics Co., Ltd.
Device No:DSE-112-054
http://www.everlight.com
Prepared date: 07-26-2005
Rev 2
Page: 2 of 10
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22SDRSYGC/S530-A3/E3/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
5
Unit
V
Reverse Voltage
VR
SDR:25
SYG:25
-40 ~ +85
-40~ +90
260 (for 5
second)
2000
Forward Current
IF
mA
Operating Temperature
Storage Temperature
Topr
Tstg
℃
℃
Soldering Temperature
Electrostatic Discharge
Power Dissipation
Tsol
ESD
Pd
℃
V
SDR:60
SYG:60
SDR:60
SYG:60
mW
Peak Forward Current
(Duty 1/10 @1KHz)
IF(Peak)
mA
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Iv SDR
SYG
Min.
47
Typ.
75
Max.
-----
-----
Unit Condition
Luminous Intensity
Viewing Angle
Peak Wavelength
mcd
deg
nm
IF=20mA
IF=20mA
IF=20mA
57
76
2θ1/2
λp SDR
SYG
-----
60
-----
650
575
-----
-----
-----
639
573
20
-----
-----
nm
nm
λd SDR
Dominant Wavelength
IF=20mA
IF=20mA
SYG -----
△λ SDR
Spectrum Radiation
Bandwidth
-----
-----
SYG
20
2.0
2.0
VF
SDR
SYG
2.4
2.4
Forward Voltage
Reverse Current
V
IF=20mA
VR=5V
-----
-----
IR
-----
10
μA
Everlight Electronics Co., Ltd.
Device No:DSE-112-054
http://www.everlight.com
Prepared date: 07-26-2005
Rev 2
Page: 3 of 10
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22SDRSYGC/S530-A3/E3/TR8
Typical Electro-Optical Characteristics Curves
SDR
Everlight Electronics Co., Ltd.
Device No:DSE-112-054
http://www.everlight.com
Prepared date: 07-26-2005
Rev 2
Page: 4 of 10
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22SDRSYGC/S530-A3/E3/TR8
Typical Electro-Optical Characteristics Curves
SYG
Everlight Electronics Co., Ltd.
Device No:DSE-112-054
http://www.everlight.com
Prepared date: 07-26-2005
Rev 2
Page: 5 of 10
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22SDRSYGC/S530-A3/E3/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
xxxxxx
xxxxxx
RoHS
xxxxxxxxxxxx
xxxx
xxxxxxxx
Reel Dimensions
Note: Tolerances Unless Dimension ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd.
Device No:DSE-112-054
http://www.everlight.com
Prepared date: 07-26-2005
Rev 2
Page: 6 of 10
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22SDRSYGC/S530-A3/E3/TR8
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: Tolerances Unless Dimension ±0.1mm , Unit = mm
Moisture Resistant Packaging
Aluminum moistue-proof bag
Label
Desiccant
Label
Reliability Test Items And Conditions
Everlight Electronics Co., Ltd.
Device No:DSE-112-054
http://www.everlight.com
Prepared date: 07-26-2005
Rev 2
Page: 7 of 10
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22SDRSYGC/S530-A3/E3/TR8
The reliability of products shall be satisfied with items listed below.
Confidence level : 90 %
LTPD : 10 %
Test
Sample
No.
1
Items
Test Condition
Ac/Re
Hours/Cycles Size
Temp. : 240℃±5℃
6 min.
Reflow Soldering
22 Pcs.
0/1
Min. 5 sec.
H : +100℃ 15 min.
300 Cycles
300 Cycles
2
Temperature Cycle
Thermal Shock
22 Pcs.
0/1
∫ 5 min.
L : -40℃ 15 min.
H : +100℃ 5 min.
3
4
22 Pcs.
22 Pcs.
0/1
0/1
∫ 10 sec.
L : -10℃ 5 min.
High Temperature
Storage
Low Temperature
Storage
1000 Hrs.
1000 Hrs.
Temp. : 100℃
Temp. : -55℃
5
6
7
22 Pcs.
22 Pcs.
22 Pcs.
0/1
0/1
0/1
DC Operating Life
IF = 20 mA
1000 Hrs.
1000 Hrs.
High Temperature /
High Humidity
85℃/RH 85%
Everlight Electronics Co., Ltd.
Device No:DSE-112-054
http://www.everlight.com
Prepared date: 07-26-2005
Rev 2
Page: 8 of 10
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22SDRSYGC/S530-A3/E3/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Lead solder temperature profile
3.3 Reflow soldering should not be done more than two times.
3.4 When soldering, do not put stress on the LEDs during heating.
3.5 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
Everlight Electronics Co., Ltd.
Device No:DSE-112-054
http://www.everlight.com
Prepared date: 07-26-2005
Rev 2
Page: 9 of 10
Prepared by: Jessica Chang
EVERLIGHT ELECTRONICS CO.,LTD.
11-22SDRSYGC/S530-A3/E3/TR8
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
Device No:DSE-112-054
http://www.everlight.com
Prepared date: 07-26-2005
Rev 2
Page: 10 of 10
Prepared by: Jessica Chang
相关型号：
11-22SURSYGC/S530-A2/TR8
Dual Color LED, Brilliant Red/brilliant Yellow Green, Water Clear, 1.5mm, ROHS COMPLIANT, SMD, 2 PIN
EVERLIGHT
©2020 ICPDF网 联系我们和版权申明