MB-13 [ETC]

MicroAmp MB-13 Circuit Board; 微安MB- 13电路板
MB-13
型号: MB-13
厂家: ETC    ETC
描述:

MicroAmp MB-13 Circuit Board
微安MB- 13电路板

文件: 总1页 (文件大小:1210K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MicroAmp MB-13 Circuit Board  
For Hittite VCOs in LP4E Packages  
F E A T U R E S  
• Fits Hiꢀte Microwave VCOs  
with LP4E packages  
• Usable with HMC384-386, 388-391,  
416, 429-431, 466, 505, 506, 532 VCOs  
• VCOs frequencies from 2-8 GHz  
• Uses standard SMD passive parts  
• RO-4350 board material  
• Fits MicroAmp MH-series housings  
The MicroAmp MB-13 circuit board is designed for rapid prototyping of microwave VCOs using Hiꢀte Microwave devices in LP4E  
packages with RF outputs on pin 16, tuning controls on pin 22, and bias on pin 20. This board will fit the MicroAmp MH series of  
connectorized housings that allow it to be used as a stand-alone oscillator or cascaded with other MicroAmp boards for added versa-  
ꢁlity. Boards are fabricated from a high-performance 13 mil thick RO-4350 laminate with RoHS compaꢁble ENIG plaꢁng (electroless  
nickel/immersion gold) on both the component side and the solid boꢂom ground plane. The board measures 0.490" x 0.590" and  
mounts into the housing with four or six #1-72 screws for opꢁmal high frequency grounding. Oscillator circuits can be easily designed  
and assembled with standard surface-mount passive components. It includes provisions for DC bias bypassing and configuring the  
tuning pin to be connected to either an SMA input connector or feed-through in the housing. Pads for the input/output connectors  
allow the SMA center pins to be easily soldered to the board aꢃer it is installed into the housing, as well as large pads to connect the  
bias voltage and tuning input pins. The tuning pin has the opꢁon of connecꢁng to the J1 SMA connector or to a feed-through by  
preferenꢁal installaꢁon of R1.  
R E F S I Z E  
F U N C T I O N  
C1  
C2  
R1  
U1  
J1  
0402  
0805  
0402  
LP4E  
Bias bypass  
Bias bypass  
Tuning pin connecꢁon  
VCO  
Coax tuning input (pin 22)  
+ Bias (pin 20)  
J2  
J3  
RF output (pin 16)  
R1 tuning input (pin 22)  
J4  
VOG SCHEMATIC  
ASSEMBLY  
For additional product information, please visit www.twinind.com  
Contact information: 925-866-8946 (phone) 925-866-8937 (fax) Sales@twinind.com  

相关型号:

MB-1390-DG

HANDLE/BAIL KIT, EXTERNAL MOUNTING BRACKET
BUD

MB-1390-LG

HANDLE/BAIL KIT, EXTERNAL MOUNTING BRACKET
BUD

MB-14

MicroAmp MB-14 Circuit Board
ETC

MB-15

MicroAmp MB-15 Circuit Board
ETC

MB-16

MicroAmp MB-16 Circuit Board
ETC

MB-18

PANEL MOUNT BRACKET FOR MODEL 18
ETC

MB-2

Fits SOT-86 and similar 4-pin
ETC

MB-3

Fits SOT-143 amplifier packages
ETC

MB-4

Fits SOT-343 (SC-70) amplifier packages
ETC

MB-448

CHASSIS MOUNTING BRACKET
BUD

MB-449

CHASSIS MOUNTING BRACKET
BUD

MB-450

CHASSIS MOUNTING BRACKET
BUD