MB-14 [ETC]
MicroAmp MB-14 Circuit Board; 微安MB- 14电路板
| 型号： | MB-14 |
| 厂家： | 
ETC |
| 描述： | MicroAmp MB-14 Circuit Board |
| 文件： | 总1页 (文件大小：1333K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MicroAmp MB-14 Circuit Board
Straight-Through Transmission Line
F E A T U R E S
• Use for traight-through connecꢀons
• Can also be used for
custom passive networks
• RO-4350 board material
• Fits MicroAmp MH-series housings
The MicroAmp MB-14 circuit board is used for a straight-through connecꢀon with the MicroAmp MH series of connectorized
housings. It can be used as an extension when designing mulꢀple board circuits with the MH-2 housing, thereby allowing a single
board to be tested before adding a second one in cascade. The MB-14 can also be used to create custom passive networks by cuꢁng
the center trace and soldering components in series or shunt. Boards are fabricated from a high-performance 13 mil thick RO-4350
laminate with RoHS compaꢀble ENIG plaꢀng (electroless nickel/immersion gold) on both the component side and the solid boꢂom
ground plane. The board measures 0.490" x 0.590" and mounts into the housing with four or eight #1-72 screws for opꢀmal high
frequency grounding. Pads for the input/output RF connectors allow the SMA center pins to be easily soldered to the board aꢃer it is
installed into the housing.
R E F
S I Z E
F U N C T I O N
J1
J2
N/A
N/A
RF port
RF port
THROUGH-LINE SCHEMATIC
ASSEMBLY
For additional product information, please visit www.twinind.com
Contact information: 925-866-8946 (phone) 925-866-8937 (fax) Sales@twinind.com
相关型号：
©2020 ICPDF网 联系我们和版权申明