MB-15 [ETC]
MicroAmp MB-15 Circuit Board; 微安MB - 15电路板
| 型号： | MB-15 |
| 厂家： | 
ETC |
| 描述： | MicroAmp MB-15 Circuit Board |
| 文件： | 总1页 (文件大小：1533K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MicroAmp MB-15 Circuit Board
For Hittite Multipliers in LP4E Packages
F E A T U R E S
• Fits Hiꢁte Microwave frequency
mulꢀpliers with LP4E packages
• Usable with HMC368, 370, 443-445,
575, 695 mulꢀpliers
• Output frequencies in X and Ku band
• Uses standard SMD passive parts
• RO-4350 board material
• Fits MicroAmp MH-series housings
The MicroAmp MB-15 circuit board is designed for rapid prototyping of acꢀve frequency mulꢀpliers using Hiꢁte Microwave devices
in LP4E packages with RF inputs on pin 3, RF outputs on pin 16, and bias connecꢀons on pins 19-23. Mulꢀplier MMICs are available in
various mulꢀplicaꢀon factors with output frequencies throughout the X and Ku-band range. This board will fit the MicroAmp MH
series of connectorized housings that allow it to be used as a stand-alone mulꢀplier or cascaded with other MicroAmp boards for
added versaꢀlity. Boards are fabricated from a high-performance 13 mil thick RO-4350 laminate with RoHS compaꢀble ENIG plaꢀng
(electroless nickel/immersion gold) on both the component side and the solid boꢂom ground plane. The board measures 0.490" x
0.590" and mounts into the housing with four or eight #1-72 screws for opꢀmal high frequency grounding. Mulꢀplier circuits can be
easily assembled with standard surface-mount passive components. The MB-15 includes provisions for DC bias bypassing. Pads for
the input/output RF connectors allow the SMA center pins to be easily soldered to the board aꢃer it is installed into the housing, as
well as a large pad to connect the bias voltage to a feed-through. Check the specific data sheet for the mulꢀplier being used. Many of
the pins are unused and need not be soldered to the ground plane.
R E F
C1
C2
C3
C4
C4
U1
J1
S I Z E
0402
0402
0402
0402
0603
LP4E
F U N C T I O N
Bias bypass (not labeled)
Bias bypass (not labeled)
Bias bypass (not labeled)
Bias bypass (not labeled)
Bias bypass (not labeled)
Mulꢀplier
RF input (pin 3)
J2
RF output (pin 16)
+ Bias (pins 19-23)
J3
MULTIPLIER SCHEMATIC
ASSEMBLY
For additional product information, please visit www.twinind.com
Contact information: 925-866-8946 (phone) 925-866-8937 (fax) Sales@twinind.com
相关型号：
©2020 ICPDF网 联系我们和版权申明