CNZ1111/CNZ1112(ON1111/ON1112) [ETC]

CNZ1111. CNZ1112 (ON1111. ON1112) - Photo Interrupters ; CNZ1111 。 CNZ1112 ( ON1111 ON1112 ) - 光遮断器\n
CNZ1111/CNZ1112(ON1111/ON1112)
型号: CNZ1111/CNZ1112(ON1111/ON1112)
厂家: ETC    ETC
描述:

CNZ1111. CNZ1112 (ON1111. ON1112) - Photo Interrupters
CNZ1111 。 CNZ1112 ( ON1111 ON1112 ) - 光遮断器\n

文件: 总4页 (文件大小:70K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Transmissive Photosensors (Photo Interrupters)  
CNZ1111, CNZ1112 (ON1111, ON1112)  
Photo Interrupters  
Unit : mm  
CNZ1111  
0.45±0.1  
For contactless SW, object detection  
Overview  
Mark for indicating  
LED side  
CNZ1111 and CNZ1112 are a photocoupler in which a high  
25.0±0.35  
efficiency GaAs infrared light emitting diode is used as the light  
13.0±0.3  
5.0±0.2  
A
0.45±0.1  
emitting element, and a high sensitivity phototransistor is used as  
the light detecting element. The two elements are arranged so as to  
face each other, and objects passing between them are detected.  
Device  
center  
A'  
2-0.45±0.2  
(2.54)  
SEC. A-A'  
(10.0)  
Features  
Highly precise position detection : 0.3 mm  
3
19.0±0.2  
2
2-ø3.2±0.2  
2
3
4
Wide gap between emitting and detecting elements, suitable for  
thick plate detection  
1
4
1
Pin connection  
Fast response : tr, tf = 6 µs (typ.)  
(Note) ( ) Dimension is reference  
Small output current variation against change in temperature  
Unit : mm  
CNZ1112  
0.45±0.1  
Absolute Maximum Ratings (Ta = 25˚C)  
Parameter  
Symbol Ratings Unit  
Reverse voltage (DC)  
Forward current (DC)  
Power dissipation  
Collector current  
VR  
3
50  
75  
20  
30  
5
V
mA  
mW  
mA  
V
Mark for indicating  
LED side  
Input (Light  
IF  
emitting diode)  
13.0±0.3  
*1  
PD  
IC  
5.0±0.2  
A
0.45±0.1  
Device  
center  
Collector to emitter voltage VCEO  
Output (Photo  
transistor)  
A'  
2-0.45±0.2  
Emitter to collector voltage VECO  
V
(10.0)  
(2.54)  
*2  
Collector power dissipation PC  
100  
mW  
SEC. A-A'  
3
2
1
Operating ambient temperature  
Topr –25 to +85 ˚C  
Temperature  
Storage temperature  
Tstg –30 to +100 ˚C  
*1 Input power derating ratio is 1.0 mW/˚C at Ta 25˚C.  
*2 Output power derating ratio is 1.33 mW/˚C at Ta 25˚C.  
4
2
1
3
4
Pin connection  
(Note) ( ) Dimension is reference  
Note) The part numbers in the parenthesis show conventional part number.  
1
Transmissive Photosensors (Photo Interrupters)  
CNZ1111,CNZ1112  
Electrical Characteristics (Ta = 25˚C)  
Parameter  
Symbol  
Conditions  
min  
typ  
max Unit  
Forward voltage (DC)  
Reverse current (DC)  
Collector cutoff current  
Collector to emitter capacitance  
Collector current  
VF IF = 50mA  
1.2  
1.5  
10  
V
µA  
nA  
pF  
mA  
µs  
Input  
characteristics  
IR VR = 3V  
ICEO VCE = 10V  
200  
Output  
characteristics  
CC VCE = 10V, f = 1MHz  
IC VCE = 10V, IF = 20mA  
tr , tf* VCC = 10V, IC = 1mA, RL = 100  
5
6
0.3  
Transfer  
Response time  
characteristics  
Collector to emitter saturation voltage VCE(sat) IF = 50mA, IC = 0.1mA  
0.3  
V
* Switching time measurement circuit  
Sig.IN  
VCC  
td : Delay time  
(Input pulse)  
tr : Rise time (Time required for the collector current to increase  
from 10% to 90% of its final value)  
90%  
10%  
Sig.OUT  
(Output pulse)  
td  
tf : Fall time (Time required for the collector current to decrease  
from 90% to 10% of its initial value)  
50  
RL  
tr  
tf  
IF , IC — Ta  
IF — VF  
IC — IF  
60  
50  
40  
30  
20  
10  
0
60  
10  
VCE = 10V  
Ta = 25˚C  
Ta = 25˚C  
IF  
50  
40  
30  
20  
10  
0
1
10 –1  
IC  
10 –2  
10 –3  
10 –1  
– 25  
0
20  
40  
60  
80  
100  
0
0.4  
0.8  
1.2  
1.6  
2.0  
2.4  
1
10  
10 2  
Ambient temperature Ta (˚C )  
Forward voltage VF (V)  
Forward current IF (mA)  
2
CNZ1111,CNZ1112  
Transmissive Photosensors (Photo Interrupters)  
VF — Ta  
IC — VCE  
IC — Ta  
1.6  
10 2  
10  
160  
120  
80  
40  
0
VCE = 10V  
Ta = 25˚C  
IF = 20mA  
IF = 50mA  
10mA  
1.2  
0.8  
0.4  
0
IF = 30mA  
1
20mA  
10mA  
10 –1  
10 –2  
10 –1  
– 40 – 20  
0
20  
40  
60  
80 100  
1
10  
10 2  
– 40 – 20  
0
20  
40  
60  
80 100  
Ambient temperature Ta (˚C )  
Collector to emitter voltage VCE (V)  
Ambient temperature Ta (˚C )  
ICEO — Ta  
tr — IC  
IC — d  
10  
1
10 3  
10 2  
100  
80  
60  
40  
20  
0
VCC = 10V  
Ta = 25˚C  
V
CE = 10V  
Ta = 25˚C  
IF = 20mA  
Criterion  
0
d
VCE = 24V  
10V  
RL = 1k  
500Ω  
10 –1  
10 –2  
10 –3  
10 –4  
10  
1
100Ω  
Sig.IN  
VCC  
Sig.  
V1  
V2  
90%  
10%  
OUT  
V1  
50Ω  
V2  
td  
RL  
tr  
1
tf  
10 –1  
– 40 – 20  
0
20  
40  
60  
80 100  
10 –2  
10 –1  
10  
0
1
2
3
4
5
6
Ambient temperature Ta (˚C )  
Collector current IC (mA)  
Distance d (mm)  
3
Caution for Safety  
Gallium arsenide material (GaAs) is used  
in this product.  
Therefore, do not burn, destroy, cut, crush, or chemi-  
cally decompose the product, since gallium arsenide  
material in powder or vapor form is harmful to human  
health.  
Observe the relevant laws and regulations when dispos-  
ing of the products. Do not mix them with ordinary in-  
dustrial waste or household refuse when disposing of  
GaAs-containing products.  
DANGER  
Request for your special attention and precautions in using the technical information  
and semiconductors described in this material  
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the  
products or technologies described in this material and controlled under the "Foreign Exchange and Foreign  
Trade Law" is to be exported or taken out of Japan.  
(2) The technical information described in this material is limited to showing representative characteristics and  
applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting  
of relative rights, or the granting of any license.  
(3) The products described in this material are intended to be used for standard applications or general electronic  
equipment (such as office equipment, communications equipment, measuring instruments and household ap-  
pliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion  
equipment, life support systems and safety devices) in which exceptional quality and reliability are required,  
or if the failure or malfunction of the products may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this material are subject to change without notice for  
reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the prod-  
ucts, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifi-  
cations satisfy your requirements.  
(5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the  
range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for  
any defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, redundant design is recommended, so that  
such equipment may not violate relevant laws or regulations because of the function of our products.  
(6) When using products for which dry packing is required, observe the conditions (including shelf life and after-  
unpacking standby time) agreed upon when specification sheets are individually exchanged.  
(7) No part of this material may be reprinted or reproduced by any means without written permission from our  
company.  
Please read the following notes before using the datasheets  
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconduc-  
tor products best suited to their applications.  
Due to modification or other reasons, any information contained in this material, such as available product  
types, technical data, and so on, is subject to change without notice.  
Customers are advised to contact our semiconductor sales office and obtain the latest information before  
starting precise technical research and/or purchasing activities.  
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always  
the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any  
liability for any damages arising from any errors etc. that may appear in this material.  
C. These materials are solely intended for a customer's individual use.  
Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or  
distributing this material to a third party, via the Internet or in any other way, is prohibited.  
2001 MAR  

相关型号:

CNZ1112

Photo Interrupters
PANASONIC

CNZ1112(ON1112)

光デバイス - フォトカプラ?フォトセンサ - 透過形フォトセンサ
ETC

CNZ1120

Photo Interrupter
PANASONIC

CNZ1120(ON1120)

Opto-Electronic Device - Photocouplers·Photosensors - Transmissive Photosensors
ETC

CNZ1122

Photo Interrupters
PANASONIC

CNZ1122/CNZ1128(ON1122/ON1128)

CNZ1122. CNZ1128 (ON1122. ON1128) - Photo Interrupters
ETC

CNZ1122Q

Transistor Output Slotted Switch, 1-Channel, 3mm Slot Width
PANASONIC

CNZ1122S

Transistor Output Slotted Switch, 1-Channel, 3mm Slot Width
PANASONIC

CNZ1128

Photo Interrupters
PANASONIC

CNZ1128R

Transistor Output Slotted Switch, 1-Channel, 3mm Slot Width
PANASONIC

CNZ1128S

Transistor Output Slotted Switch, 1-Channel, 3mm Slot Width
PANASONIC

CNZ1179

Photo Interrupter
PANASONIC