CNZ1122Q [PANASONIC]
Transistor Output Slotted Switch, 1-Channel, 3mm Slot Width;
| 型号： | CNZ1122Q |
| 厂家： | 
PANASONIC |
| 描述： | Transistor Output Slotted Switch, 1-Channel, 3mm Slot Width 输出元件 光电 |
| 文件： | 总4页 (文件大小：187K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Transmissive Photosensors (Photo Interrupters)
CNZ1122, CNZ1128 (ON1122, ON1128)
Photo Interrupters
Unit : mm
CNZ1122
Mark for
For contactless SW, object detection
indicating
LED side
25.0±0.35
13.0±0.3
3.0±0.2
evice
nter
Overview
CNZ1122 and CNZ1128 are a photocoupler in which a visible
light emitting diode is used as the light emitting element, and a high
sensitivity phototransistor is used as the light detecting elemenThe
two elements are arranged so as to face each other, and objectpassng
between them are detected.
2-0.45±0.2
*9.6±0.3
19.0±0.2
3.2±0.
2
1
3
4
Features
Highly precise position detection : 1.2 mm
Fast response : tr, tf = 6 µs (typ.)
2
1
3
4
Using small package for saving munting space (CNZ1128)
Small output current variatainst change in temperaure
Pin connection
(Note) * is dimension at the root of leads
Absolute Maximum Ratngs (Ta = 25˚C)
Parameer
Symbol Rtings Unit
Unit : mm
CNZ1128
everse vltage (DC)
Forard current (D
Pwer dissipation
Collector curent
VR
3
25
70
20
30
5
V
mA
mW
mA
V
Input (Light
Mrk for indicating
LEside
emitting diode)
13.0±0.3
3.0±0.2
3.5±0.2
IC
Device
center
Collector to emter voltae VCEO
Emittr to collector voltage VECO
Oput (
ransior)
V
4- 0.45±0.2
*2
Collector power issipation P
100
mW
Operatng ambient temperature
Topr –25 to +85 ˚C
*9.4±0.3
*2.54±0.2
Temp
2
1
3
4
rage temperature
*1 Inpung ratio is 0.93 mW/˚C at Ta ≥ 25˚C.
*2 Output perating ratio is 1.33 mW/˚C at Ta ≥ 25˚C.
Tstg –30 to +100 ˚C
2
1
3
4
Pin connection
(Note) * is dimension at the root of leads
Note) The part numbers in the parenthesis show conventional part number.
1
Transmissive Photosensors (Photo Interrupters)
CNZ1122,CNZ1128
Electrical Characteristics (Ta = 25˚C)
Parameter
Symbol
Conditions
min
typ
max Unit
Forward voltage (DC)
Reverse current (DC)
Collector cutoff current
Collector to emitter capacitance
Collector current
VF IF = 20mA
2.1
2.8
5
V
µA
nA
pF
mA
µs
Input
characteristics
IR VR = 3V
ICEO VCE = 10V
200
Output
characteristics
CC VCE = 10V, f = 1MHz
5
6
*2
IC
VCE = 10V, IF = 15mA
0.3
Transfer
Response time
tr , tf*1 VCC = 10V, IC = 1mA, RL = 100Ω
characteristics
Collector to emitter saturation voltage VCE(sat) IF = 25mA, IC = 0.1mA
0.5
V
*1 Switching time measurement circuit
Sig.IN
VCC
td : Delay time
(Input pulse)
tr : Rise time (Time required for the collector current to increase
from 10% to 90% of its final value)
90%
10%
Sig.OUT
(Output pulse)
td
tf : Fall time (Time required for the collector current to decrease
from 90% to 10% of its initial value)
50Ω
RL
tr
tf
*2
IC classifications
Class
Q
R
S
IC (mA)
0.3 to 0.75
0.55 to 1.30
>1.10
IF , IC — Ta
IF — VF
IC — IF
40
30
20
10
0
32
10 2
VCE = 10V
Ta = 25˚C
Ta = 25˚C
10
24
16
8
IF
1
IC
10 –1
0
10 –2
10 –1
– 25
0
20
40
60
80
100
0
0.4
0.8
1.2
1.6
2.0
2.4
1
10
10 2
Ambient temperature Ta (˚C )
Forward voltage VF (V)
Forward current IF (mA)
2
CNZ1122,CNZ1128
Transmissive Photosensors (Photo Interrupters)
IC — VCE
IC — Ta
ICEO — Ta
10 2
160
120
80
10
1
VCE = 10V
V
CE = 10V
IF = 20mA
Ta = 25˚C
IF = 15mA
10
1
10 –1
10 –2
10 –3
10 –1
40
10 –2
10 –1
0
1
10
10 2
– 40 – 20
0
20
40
60
80 100
– 40 – 20
0
20 40 60 80 100 120
Collector to emitter voltage VCE (V)
Ambient temperature Ta (˚C )
Ambient temperature Ta (˚C )
tr — IC
IC — d
10 3
10 2
100
80
60
40
20
0
VCC = 10V
Ta = 25˚C
V
CE = 10V
Ta = 25˚C
IF = 15mA
Criterion
0
RL = 1kΩ
500Ω
d
10
1
100Ω
Sig.IN
VCC
Sig.
V1
V2
90%
10%
OUT
V1
50Ω
V2
td
RL
tr
1
tf
10 –1
10 –2
10 –1
10
0
1
2
3
4
5
6
Collector current IC (mA)
Distance d (mm)
3
Caution for Safety
¢ This product contains Gallium Arsenide (GaAs).
GaAs powder and vapor are hazardous to human health if inhaled or
ingested. Do not burn, destroy, cut, cleave off, or chemically dissolve the
product. Follow related laws and ordinances for disposal. The product
should be excluded from general industrial waste or household garbage.
DANGER
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
If you have any inquiries or questions about this book or our semiconductor products, please contact one
of our sales offices listed on the back or Semiconductor Company's Department.
相关型号：
©2020 ICPDF网 联系我们和版权申明