AMDATHLON64 [ETC]
AMD Athlon 64 - Report of Management on Processor Performance Benchmarks AMD Athlon 64 Processor 3200+ ; AMD速龙64 - 管理对处理器性能的基准测试报告的AMD Athlon 64 3200+处理器
| 型号： | AMDATHLON64 |
| 厂家： | 
ETC |
| 描述： | AMD Athlon 64 - Report of Management on Processor Performance Benchmarks AMD Athlon 64 Processor 3200+
|
| 文件： | 总24页 (文件大小：539K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Report of Independent Accountants
To the Board of Directors of Advanced Micro Devices, Inc:
We have examined management’s assertions included in the Advanced Micro Devices
Report of Management on Processor Performance Benchmarks for the AMD Athlon™ 64
Processor 3200+ for the period from August 19, 2003 to August 22, 2003. Advanced
Micro Devices, Inc.’s management is responsible for the assertions. Our responsibility is
to express an opinion on management’s assertions based on our examination.
Our examination was conducted in accordance with attestation standards established by
the American Institute of Certified Public Accountants and, accordingly, included
examining, on a test basis, evidence supporting management’s assertions and performing
such other procedures as we considered necessary in the circumstances. We believe that
our examination provides a reasonable basis for our opinion.
It is not PricewaterhouseCoopers LLP's policy or intent to endorse the product or services of any
organization.
In our opinion, management’s assertions referenced above are fairly stated, in all material
respects.
September 3, 2003
Advanced Micro Devices
Report of Management on Processor Performance Benchmarks
AMD Athlon™ 64 Processor 3200+
I. Benchmark Results
The management of Advanced Micro Devices, Inc. ("AMD") asserts that the following results
were generated with the AMD Athlon™ 64 processor 3200+ using the benchmark tests below (a
higher score indicates better performance):
Benchmark
Version
AMD Athlon™ 64
Units
Processor 3200+ results
AquaMark (1024x768x32)
2.2
1.0
107.17
322.33
FPS
N/A
BAPCO SYSmark™ 2001 Internet Content
Creation*
BAPCO SYSmark™ 2001 Office
Productivity*
1.0
282.33
N/A
bbmpeg (raw AVI to MPEG2)
Comanche 4 Demo (1024x768x32)
1.24 beta 18
1.0.1.18
1.0.2
566.00
68.89
101.73
45.00
63.27
SEC
FPS
N/A
N/A
N/A
eTesting Labs Inc. Business Winstone™ 2001
eTesting Labs Inc. Business Winstone™ 2002
1.0
eTesting Labs Inc. Content Creation
Winstone™ 2002*
1.0.1
eTesting Labs Inc. Content Creation
Winstone™ 2003*
1.0
1.0
60.77
N/A
N/A
N/A
N/A
N/A
Futuremark Corporation 3DMark™ 2001 -
Second Edition (Hardware)
19562.00
8551.33
5784.33
2424.67
Futuremark Corporation 3DMark™ 2001 -
Second Edition (Software)
1.0
Futuremark Corporation 3DMark™ 2003 -
(Hardware)
3.3.0
3.3.0
Futuremark Corporation 3DMark™ 2003 -
(Software)
Half-Life Smokin' (1024x768x32)
Quake III Demo2 (1024x768x32)
RazorLame
1.0.0.9
Arena demo2
1.1.5.1342
1.1
126.25
381.33
288.00
138.53
FPS
FPS
SEC
FPS
Return to Castle Wolfenstein 3D
(1024x768x32)
Serious Sam (1024x768x32)
1.02
204.13
FPS
Serious Sam: Second Encounter - Demo
Version (1024x768x32)
Demo
248.23
FPS
Splinter Cell (1_1_1)
Splinter Cell (1_1_2)
1.2
1.2
96.18
89.86
FPS
FPS
FPS
Star Wars - Jedi Knight II: Jedi Outcast
(1024x768x32)
1.04
176.00
Unreal Tournament (1024x768x32)
Unreal Tournament 2003 Demo – Botmatch
Unreal Tournament 2003 Demo – Flyby
WinRAR
4.36
1142
1142
3.2
126.07
105.84
266.06
21.35
FPS
FPS
FPS
SEC
SEC
XMPEG
5.01
59.92
N/A – Indicates the benchmark score is an absolute number without units.
FPS – Frames per second.
SEC – Seconds.
* - Test results reflect the use of a software patch which allows the Microsoft® Windows® Media Encoder
7 codec to utilize SIMD processor instructions on the AMD Athlon™ 64 Processor 3200+. This software
patch is not publicly available.
AMD installed the benchmarks using the manufacturer's CDs or downloads available from the
Internet. The benchmarks were installed using the default locations and settings. Specific
installation instructions, execution instructions, or changes to the default settings can be viewed
by selecting the name of the benchmark above.
II. Hardware And Software Configuration
AMD Management asserts that the components listed below were used to generate the
benchmarks reported. AMD Performance Marketing in Austin, Texas assembled these
components for benchmarking purposes.
Component Manufacturer
Model
Description
Processor
AMD
AMD Athlon™ 64
Processor 3200+
Processor operates at 2.0 GHz
Operating
System
Microsoft© Windows® XP Professional Version 2002 (Service Pack 1A)
Motherboard
Hard drive
MSI
MS-6702
Version OE, VIA Chipset
Seagate
Barracuda 7200.7 120GB
Serial ATA, 7200 RPM,
ST3120026AS
RAM Memory
Network Card
Corsair
RelTek
CMX512-3500C2
(Integrated)
2 x 512MB PC3500 DDR
DIMM, 434MHz
(Integrated)
Component Manufacturer
Model
Description
(Integrated)
128MB
Sound Card
Video Card
DVD-ROM
RelTek
ATI
(Integrated)
Radeon 9800
SD-M1212
Toshiba
6X/32X IDE
The BIOS used for running the benchmarks is not publicly available. The operating system was
installed on the platform using an NTFS partition. The default settings were used during the
installation. Select the operating system above to display changes made to the configuration after
the completion of the default installation of the operating system.
AMD, the AMD Arrow Logo, the AMD64 logo, AMD Athlon, and AMD Opteron and combinations
thereof, are trademarks of Advanced Micro Devices, Inc. Microsoft and Windows are registered trademarks
of Microsoft Corporation in the United States and/or other jurisdictions. Content Creation Winstone,
Business Winstone, and 3D WinBench are trademarks and Winstone is a registered trademark of Ziff Davis
Publishing Holdings Inc., an affiliate of eTesting Labs Inc., in the United States and other countries.
BAPCO and SYSmark are trademarks of Business Applications Performance Corporation. 3DMark is a
trademark of Futuremark Corporation, in the United States and other countries. NVIDIA is a registered
trademark of NVIDIA Corporation. Other product names used in this publication are for identification
purposes only and may be trademarks of their respective companies. These tests were performed without
independent verification by eTesting Labs Inc., and Futuremark Corporation, and eTesting Labs Inc., and
Futuremark Corporation, make no representation as to the results of the tests.
III. Testing Procedure
AMD Management asserts that the following procedures were used by Performance Marketing to
test and record the benchmark results for each benchmark in Section I:
Testing Methodology
1.Ensure the configurations for a specific benchmark are configured as stated in the configuration
and testing section for each benchmark. Execute the benchmark three times.
2. Perform the coefficient of variation ("CV") calculation using the three results. The CV is
calculated by dividing the standard deviation of the three test results by the mean of the three test
results.
3. If the result of the CV calculation is less than one percent ("1%"), then the results are within
tolerance. If the result of the CV calculation is more than 1%, perform another run of the
benchmark and record the results. Calculate the mean of all test results and use the three results
closest to the mean and recalculate the CV. (Note: This step is performed until the result of the
CV calculation is equal to or less than 1%.)
4. Take the three test results that were used to successfully pass the CV calculation requirements
and calculate the average of the three. This average is documented as the reported benchmark
score.
Operating System Setup
•
•
•
•
•
•
•
•
•
•
•
•
•
During bootup, hit “Enter” to boot from CD-ROM
Hit “F6” to install drivers for serial ATA
Hit “S” to specify additional device
Insert floppy disk with the downloaded ATA drivers
Hit “Enter” to continue
Choose “WINXP Promise SATA378™ Controller”
Hit “Enter” to continue
Hit “Enter” to continue the installation of “Windows XP Evaluation software”
Hit “Enter” to continue setup of “XP”
Hit “F8” to agree to license agreement
Hit “ESC=Don’t Repair” to install fresh copy of Windows XP without repairing
Hit “D=Delete Partition” to delete all existing partitions
Hit “C” to create two partitions of equal size (8MB will be leftover after partitions are
created)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Hit “Enter” on new 57232 MB partition
Select “Format the partition using the NTFS (Quick) file system” and hit “Enter”
Click “Yes” to verify installations of serial ATA drivers
Click “Next” to continue on “Regional and Language Options”
Type in name and organization
Type in valid Windows XP product key and click “Next”
Click “Next” on “Administrator Password”
Click “Next” on “Date and Time Settings”
Click “Next” on “Networking Settings” to confirm “Typical Settings”
Click “Next” on “Workgroup and Computer Domain”
Click “Ok” to confirm display settings
Click “Ok” to confirm new monitor settings
Click “Next” to continue on “Welcome Microsoft Windows”
Click “Skip” to skip “Networking Settings”
Select “No” to not “Activate Windows” and click “Next”
Type in user name and click “Next”
Click “Finish”
Open “My Computer”
Right click on “Drive D”
Click “Format”
Select “Quick format”
Click “Start”
Click “Ok” to confirm format
On desktop right click “My Computer”
Select “Properties” and click the “Advanced” tab
Click “Performance Options”
Click “Settings” and click “Advanced”
Click “Change for Virtual Memory”
Select drive “C” and select “No paging file” under “Change virtual memory (paging file)”
Click “Set”
Select drive “D” select “Custom size”
Type “1536” MB for “Initial Size”
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Type “3072” MB for “Maximum Size”
Click “Set”
Click “Ok” and restart computer
On desktop right click “My Computer”
Select “Properties” and click “Automatic Updates”
Select “Turn off Automatic Updating. I want to update my computer manually”
Click “Apply”
Click “System Restore” and select “Turn off System Restore on all drives”
Click “Apply”
Click “Yes” to verify Turn Off System Restore
On desktop right click “My Computer”
Select “Properties” and click the “Advanced” tab
Click “Settings” under “Performance”
Select “Adjust for best performance”
Click “Apply”
Right click on task bar and select “Properties”
Deselect “Keep the taskbar on top of other windows”
Click “Apply”
Open “Control Panel” and double click “Power Options”
Select “Always On” from “Power Schemes” and select “Never” to “Turn off monitor”
Click “Apply”
Right click on desktop and select “Properties”
Double click “Display”
Click “Screen Saver” tab and select “(None)” as screen saver
Click “Apply”
MainDisk.txt – Windows XP
•
•
•
Format floppy disk
Go to “WINXP folder” and select “FASTTX2k”, “TXTsetup.oem”, “ulsata”
Copy selected files onto floppy disk
Install XP Service Pack 1A
•
Install XP Windows Service Pack 1a Network Installation “xpsp1a_en_x86.exe” self-
extracting cabinet (version 1.16.121.0)
•
•
•
•
Click “Next” to continue
Select “I agree” and click “Next”
Select “Do not archive files” and click “Next”
Click “Finish” to restart computer
Install Motherboard Drivers
•
•
•
•
•
Install “VIAHyperion4in1448V.exe” chipset drivers
Double click on the .exe file
Click “Next” to start install
Click “Yes” to agree to license
Select “Normal installation” and Click “Next”
•
•
•
•
Click “Next” to install default components
Select “Install VIA PCI IDE Bus Driver” and click “Next”
Select “Install AGP driver” and click “Next”
Select “Yes, I want to restart the computer” and click “Ok”
Sound Card Setup
•
•
•
•
•
Extract sound files to any directory
Double click “setup.exe” file
Click “Next” to begin installation
Click “Finish” to complete
Select “Yes, I want to restart the computer” and click “Ok”
Ethernet Card Setup
•
•
•
•
•
Extract files to any directory
Right click on “My Computer”
Click on “Hardware” Tab and select “Device Manager” button
Right Click on “Ethernet Controller” and select “Update driver”
Select “Install from a list or a specific location” and click “Next”
o
o
o
Select “Best driver in these locations”,
Click on both boxes and enter the directory where files were extracted
Click “Ok”
•
•
•
Click “Next” to continue
Select “Continue Anyway” when asked for continuance of installation
Click “Finish” to complete installation
Install DirectX 9.0A
•
•
•
•
•
•
•
•
Install “DirectX 9A_redist.exe” from CD
Click “Yes” to accept “License Agreement”
Click “Unzip” to specified location (for example c:\dX9) and click “Unzip”
Install DirectX from “c:\dX9\dxsetup.exe”
Click “Next” to accept “License Agreement”
Click “Next” to install DirectX 9.0
Click “Finish” to restart computer
(Note: DX9.0A must be installed before video card setup)
Video Card Setup
•
•
•
•
•
•
•
•
Install file from download, “wxp-w2k-catalyst-7-91-030625a-010027c-efg.exe”
Double click on the .exe file
Click “Next” to begin installation
Click “Next” to confirm location of the file
Click “Yes to All” to overwrite protection (if dx9 was not setup before video)
Click “Next” to install shied wizard
Click to “Yes” to agree to license
Click on “Express” Installation
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Click “Yes” to restart computer
Right click on desktop and select “Properties” sub menu item
Choose “Settings” tab
Change “Screen Resolution” to “1024 by 768 pixels”
Click “Apply” to implement settings
Click “Yes” to save settings
Click “Advanced” button on settings tab
Choose “Monitor” tab and choose “85 Hertz” for “Set Screen Refresh”
Choose “Display” tab
Set “Maximum Resolution” to “1024 by 768”
Set “Maximum Refresh” to 85 Hz
Click on “Open GL” tab
Change “Wait for Vertical Sync” to “Always Off”
Click on “Direct3D” tab
Change “Wait for Vertical Sync” to “Always Off”
Click “Apply” and “Yes” to save settings
Click “Ok” to close all dialog boxes
AMD SSE setup for Windows Media Encoder
•
•
•
During bootup, hit “F8” to go into Safe Mode
Replace “wmvdmoe.dll” in c:\ WINDOWS\system32
Click “Yes” to “replace existing file”
DXDIAG
•
•
•
Run “DXDIAG” from the command line
Click “Yes” to run DirectX Diagnostic Tool
Select the “More Help” tab
o
o
Click “Override” and select “Override Value” type “85”
Click “Ok”
•
•
Click “Exit” and restart computer
Deselect “Show this screen next time you start Windows” when “Desktop Help for ATI”
window appears
WCPUID v3.1 Setup
•
•
•
•
Download “wcpuid v3.1” from http://www.h-oda.com
Install “wcpuid31Ao c:\wcpuid”
Run “c:\wcpuid\wcpuid.exe”
Ensure that “AGP Data Rate” is set to “8x” (under Chipset Info)
BIOS Configuration
*Note: The BIOS used for running the benchmarks is not publicly available.
A6702VMS Version 1.0BA 071103
(The following text in bold represents a menu, which is selected, text in italics represents an action, which
can be performed within a menu).
•
Standard CMOS Features
o
System Date: August 19, 2003 Tue
•
Advanced Chipset Features
o
o
CAS Latency – CL2.0
AGP Aperture Size – 256MB
•
•
PNP/PCI Configurations
o
Plug and Play Aware O/S – Yes
Integrated Peripherals
o
o
o
o
o
Serial Port 1 – Disabled
Serial Port 2 – Disabled
VT8327 SATA – IDE Controller – Disabled
Onboard Lan Controller – Enabled
Onboard Promise S.ATA – SATA
•
Save and Exit Setup
Enter To Continue
o
IV. Benchmark Configuration and Testing
AquaMark (1024x768x32)
•
•
•
•
•
•
•
Install AquaMark: AquaMark_22.exe (version 0.4455.0.0)
Click “Next” to install AquaMark
Click “Next” for “Read Me File”
Click “Next” to install to default “Destination Location”
Click “Next” to install to default “Program Manager Group”
Click “Next” to “Start Installation”
Click “Finish” to complete installation
To run the benchmark:
•
•
•
Execute “AquaMark” from Windows “Start” Menu
Choose “Programs” and “AquaMark”
Hit “Enter” to launch test
BAPCO SYSmark™ 2001 Internet Content Creation and Office Productivity
(Results for both Internet Content Creation and Office Productivity are generated during each run
of the benchmark)
•
•
•
Install SM2001CD1.exe, unzip to default directory and unzip
Install SM2001CD2.exe, unzip to default directory, unzip, and select “Finish”
Run setup to install SYSmark 2001: “c:\sm2001src\setup.exe”
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Click “Next” to install SYSmark 2001
Click “Yes” to accept “License Agreement”
Click “Next” to confirm “Customer Information”
Click “Next” to install to default “Destination Location”
Click “Next” to install to default “Program Folder”
Click “Yes” to move the program files to the alternate key
Click “Finish” to complete installation
Install SYSmark 2001 patch: “SYSmark2001Patch3.exe”
Click “Yes” to install SYSmark 2001Patch 3
Click “Finish” to complete patch installation
Execute “Netscape” from desktop
Click “Ok” to acknowledge “Alert”
Click “Ok” to acknowledge “Alert”
Click “View” and deselect “My Sidebar”
Click “Edit” and select “Preferences”
Click “Blank Page” under “When Navigator starts up, display” and click “Ok”
Close “Netscape”
Execute Windows Media Encoder: “c:\sm2001src\MediaEnc.exe”
Click “Yes” to accept “License Agreement”
Click “Next” to install Windows Media Encoder 7
Click “Finish” to install default “Installation Directory”
Click “Yes” to create “Program Folder”
Select “Exit Setup” and click “Ok”
To run the benchmark:
•
•
•
•
Execute SYSmark 2001 from Windows “Start” menu
Click “Run”
Click on “Official Run”
Type project name and click “Ok”
bbmpeg (raw AVI to MPEG2)
•
•
•
•
•
Open folder “bbmpg12418”
Extract “bbmpg12418.exe” to c:\bbmpg folder onto the desktop
Copy “AustinMontageLong.avi” to desktop
Execute “avimpg2” from c:\bbmpg
When the dialog box opens do the following:
o
o
Click “ADD” and choose “AustinMontageLong” from desktop
Click “MPEG filename”
ꢀ
ꢀ
Type filename “testfile”
Click “Save” to continue
o
o
Unclick “Preview with frame operations”
Click “Start Encoding” and then “Settings”
ꢀ
Under “General Settings” tab, change “MMX modes” to “*SSE-fastest”
(Pentium III and Athlon)
ꢀ
Under “Video Stream Settings”, click on “MPEG-2” and Click “Ok”
To run benchmark
•
Click “Start” immediately after the above step
Comanche 4 Demo (1024x768x32)
•
•
•
•
•
Install Comanche 4: C4DEMOX.exe
Click “Next” to install Comanche 4
Click “Yes” to accept “License Agreement”
Click “Next” to install to default “Destination Location”
Click “Finish” to complete installation
To run the benchmark:
•
•
•
•
•
•
•
•
•
Execute Comanche 4 Demo Benchmark Test
Select “Disable Audio”
Select “1024x768” for “Screen Resolution”
Creates an output file. Rename it to “Comanche Run 1”
(For the first time run, the system performs a system check)
Click “Run Benchmark”
Click “Ok” to select “Video Card”
Click “Ok” for “Resolution Test”
Click “Ok” for “Resolution Test Complete”
eTesting Labs Inc. Business Winstone™ 2001
•
•
•
•
•
•
•
Click “Business Winstone™ 2001” and click “Next” to install
Click “Next” to install in default “Destination Location”
Click “Yes” to create directory
Select “Copy Business support files” and click “Next”
Click “Next” to install in default “Program Folder”
Click “Next” to “Start Copying Files”
Click “Finish” to complete setup
To run the benchmark:
•
•
•
•
•
•
•
•
•
•
•
•
Select Ziff Davis Media Benchmarks from Windows “Start” menu.
Choose “Ziff Davis Media Business Winstone 2001”
Click “Proceed” to accept “License Agreement”
Click “OK” to accept “Business Winstone Registration License Agreement”
Click “Run” Business Winstone 2001
Click “Next” to run “System Configuration Problem analysis”
Click “Next” for “Minimum Resource Requirements”
Click “Next” for “Other Requirements”
Click “Next” for “Other Requirements”
Click “Next” for “Other Requirements”
Click “Next” for “Business Winstone Requirements”
Click “Finish” for “System Configuration Problem”
•
Click “Ok” for “Automated Defrag”
eTesting Labs Inc. Business Winstone™ 2002
•
•
•
•
•
•
•
Click “Business Winstone™ 2002” and click “Next” to install
Click “Next” to install in default “Destination Location”
Click “Yes” to create directory
Select “Copy Business support files” and click “Next”
Click “Next” to install in default “Program Folder”
Click “Next” to “Start Copying Files”
Click “Finish” to complete setup.
To run the benchmark:
•
•
•
•
•
•
•
•
•
•
•
•
•
Execute “PC Magazine Benchmarks” from Windows “Start” menu
Choose “PC Magazine Business Winstone 2002”
Click “Proceed” to accept “License Agreement”
Click “Yes” to accept “Business Winstone Registration License Agreement”
Click “Run” Business Winstone 2002
Click “Next” to run “System Configuration Problem analysis”
Click “Next” for “Minimum Resource Requirements”
Click “Next” for “Other Requirements”
Click “Next” for “Other Requirements”
Click “Next” for “Other Requirements”
Click “Next” for “Business Winstone Requirements”
Click “Finish” for “System Configuration Problem”
Click “Ok” for “Automated Defrag”
eTesting Labs Inc. Content Creation Winstone™ 2002
•
•
•
•
•
•
•
Click “Content Creation Winstone 2002” and click “Next” to install
Click “Next” to install in default “Destination Location”
Click “Yes” to create directory
Select “Copy Content Creation support files” and click “Next”
Click “Next” to install in default “Program Folder”
Click “Next” to “Start Copying Files”
Click “Finish” to complete setup
To run the benchmark:
•
•
•
•
•
•
•
•
Execute “Ziff Davis Media Content Creation Winstone 2002” from Windows “Start” menu
Choose “Ziff Davis Media Content Creation Winstone 2002”
Click “Proceed” to accept “License Agreement”
Click “Yes” to accept “Content Creation Winstone 2002 Registration License Agreement”
Click “Run” Content Creation Winstone 2002
Click “Next” to run “System Configuration Problem analysis”
Click “Next” for “Minimum Resource Requirements”
Click “Next” for “Other Requirements”
•
•
•
•
•
Click “Next” for “Other Requirements”
Click “Next” for “Other Requirements”
Click “Next” for “Content Creation Winstone Requirements”
Click “Finish” for “System Configuration Problem”
Click “Ok” for “Automated Defrag”
eTesting Labs Inc. Content Creation Winstone™ 2003
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Click “Content Creation Winstone 2003” and click “Next” to install
Click “Next” to install in default “Destination Location”
Click “Yes” to create directory
Select “Copy Content Creation support files” and click “Next”
Click “Next” to install in default “Program Folder”
Click “Next” to “Start Copying Files”
Click “Yes” to install Windows Media Encoder 7.1
Click “Yes” to accept “License Agreement”
Click “Next” to install Windows Media Encoder 7.1
Click “Finish” complete installation
Click “Yes” to create “Windows Media Encoder directory”
Select “Exit Setup” and click “Ok”
Click “Ok” to complete setup
Click “Finish” to complete setup
Double Click Install patch for Windows Media Encoder: WM312125.exe
Click “Yes” to accept “License Agreement”
To run the benchmark:
•
•
•
•
•
•
•
•
•
•
•
•
•
Execute “PC Magazine Media Content Creation Winstone 2003” from “Start” menu
Choose “PC Magazine Business Winstone 2003”
Click “Proceed” to accept “License Agreement”
Click Yes to acknowledge you have read the license agreement
Click “Run” Multimedia Content Creation Winstone 2003
Click “Next” to run “System Configuration Problem analysis”
Click “Next” for “Minimum Resource Requirements”
Click “Next” for “Other Requirements”
Click “Next” for “Other Requirements”
Click “Next” for “Other Requirements”
Click “Next” for “Content Creation Winstone Requirements”
Click “Finish” for “System Configuration Problem”
Click “Ok” for “Automated Defrag”
Futuremark Corporation 3DMark™ 2001 - Second Edition
•
•
•
•
•
Click “Next” to install 3Dmark2001 SE Pro
Enter Registration code and click “Next”
Click “Ok” registration code confirmation
Click “Yes” to accept “License Agreement”
Click “Next” to install to default “Destination Location”
•
•
•
•
•
Click “Next” to start “Coping Files”
Click “Finish” to complete installation
Install patch: 3Dmark2001SE_patch.exe (Version 2.11.15.0)
Click “Next” to install 3Dmark2001 SE patch
Click “Ok” to confirm installation
To run the software benchmark:
•
•
•
•
•
•
•
•
•
Execute “3Dmark2001 SE Pro”
Click “Change” in “Display and CPU Settings”
Select “D3D Software T&L” under “Rendering Pipeline”
Click “Ok”
Click “Change” under “Selected Test”
Select only the first four game tests under “Game Performance”
Deselect the remaining test
Click “Ok”
Click “Benchmark” to launch test
(Note: After each run, exit and restart the program)
To run the hardware benchmark:
•
•
•
•
•
•
•
•
•
•
Execute “3Dmark2001 SE Pro”
Click “Change” in “Display and CPU Settings”
Ensure that “Double buffering” is set to “Enabled”
Select “D3D Hardware T&L” under “Rendering Pipeline”
Click “Ok”
Click “Change” under “Selected Test”
Select only the first four game tests under “Game Performance”
Deselect the remaining test
Click “Ok”
Click “Benchmark” to launch test
(Note: After each run, exit and restart the program)
Futuremark Corporation 3DMark™ 2003
•
•
•
•
•
•
•
•
•
•
•
Execute 3DMark 2003: mg-3dmark03.exe (version 7.1.100.1248)
Click “Next” to install 3Dmark03
Select “I accept the terms of the license agreement” and click “Next”
Click “Next” to install to default “Destination Location”
Click “Install” to “Install the Program”
Enter registration code and click “Next”
Click “Ok” registration code confirmation
Click “Finish” to complete installation
Install patch 3Dmark03_patch330.exe (version 7.1.100.1248)
Click OK for information box about DX9 install
•
•
Click “Next” to install 3Dmark2001 SE patch
Click “Finish” to confirm installation
To run the software benchmark:
•
•
•
•
•
•
•
•
•
Execute “3DMark03”
Select “Do not show this dialog again” and click “Close”
Click “Select” under “Tests”
Select first four games under “Game Test” and deselect the other test
Click “Ok”
Click “Change” under “Settings”
Click “Force Software Vertex Shaders” box
Click “Ok”
Click “Run 3Dmark”
To run the hardware benchmark:
•
•
•
•
•
Execute “3DMark03”
Click “Select” under “Tests”
Select first four games under “Game Test” and deselect the other test
Click “Ok”
Click “Run 3Dmark”
Half-Life Smokin' (1024x768x32)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Click “Install Half-Life” and click “Yes”
Click “Next” to install Half-Life
Click “Yes” to accept “License Agreement”
Click “Next” to install to default “Destination Location”
Click “Ok” to begin setup
Click “Ok” to complete setup
Click “No” to not check for available updates
Click “Ok” to register now and click “Register Later”
Click “Next” “Select Components”
Click “Finish” to complete setup
Go to Windows “Start” menu and select “Halflife”
Click on “Don’t show me again”
Click “Continue” to acknowledge compatibility issue
Type in registration code and click “Finish”
Execute “Half-Life Console”
Click “Configuration,” “Video,” and “Video Modes”
Select “Open GL” and click “Ok”
Click “Cancel” for “New Connection Wizard”
Select “1024x768” and click “Ok”
Click “Done” to exit video menu
Click “Done” to exit menu
Click “Quit” to exit game
Click “Ok” to confirm exit
•
•
•
•
•
•
•
•
•
•
Install Half-Life patch: “10051009.exe”
Click “Next” to install Half-Life Update 1.0.0.9
Click “I Agree” to accept “License Agreement”
Click “Next” for “Read Me File”
Click “Next” to install to default “Destination Location”
Click “Next” to “Start Installation”
Click “Next” to place shortcut on desktop
Click “Finish” to compete installation
Move “smoking.dem” to “c:\SIERRA\Half-Life\valve\”
Move the maps folder to “c:\SIERRA\Half-Life\valve\”
To run the benchmark:
•
•
•
•
•
•
Insert CD in CD-Rom
Execute “Half-Life Console” from start menu
Click “Console”
Eject CD from CD-Rom so that music does not play
Type “timedemo smoking”
Hit “Enter” to launch demo
Quake III Demo2 (1024x768x32)
•
•
•
•
•
•
Install Quake III: Q3Ademo.exe
Click “Next” to install Quake 3 Arena Demo
Click “Yes” to accept “License Agreement”
Click “Next” to install to default “Destination Location”
Click “Next” to install
Click “Close” to complete setup
To run the benchmark:
•
•
•
•
•
•
•
•
Execute “Quake3” from desktop
Click “Setup”
Click “System”
Click “Video Mode” to select “1024x768”
Click “Color Depth” to select “32 Bit”
Click “Accept”
Hit "~" for console command view
Type the following commands to configure and run the demo:
o
o
o
o
o
o
o
o
“s_initsound 0”
“snd_restart”
Hit “~”
“com_maxfps 0”
“vid_restart”
Hit “~”
“timedemo 1”
“demo demo002”
•
•
Hit “Enter” to launch demo
Hit "~" to view results
RazorLame
•
•
•
•
•
Install “ezcddax6.exe” to convert ripping CD to wav format
Click “Next” to continue ripping from “Easy CD-DA Extractor Setup”
Click “Next” to install program into default folder
Click “Finish”
Insert “Pink Floyd - Wish You Were Here” Digital Remaster 1992 Audio CD into drive. (CD
Control number: CDP 7243 8 29750 2 1)
Go to “Start”, “Programs”, “Easy CD-DA Extractor 6”, “Easy CD-DA Extractor”
Click “Evaluate the Software”
•
•
o
Select “Device” to “Hitachi GD-2000 1000” to reflect the CDROM is installed on the
computer
o
o
o
o
o
Select all tracks
Click “Copy” to continue
In the dialog box, Change output folder to “C:\Pink Floyd”
Go to “Integrated Formats” tab, choose “.wav (standard)” in the first drop down box
Click “Start Copying” to copy files
•
•
•
•
•
•
•
•
•
•
•
•
Burn the raw files to another CD
Input the burned CD into the computer
Choose folder “Pink Floyd”
Copy folder from CD to desktop
Install “lamewin32”
Click “I Agree” to license agreement
Click “Next” to install “LAME Mp3”
Click “Install” to continue install
Clicks “Close”
Open “Razor Lame” shortcut on desktop
Drag the “Pink Floyd” folder track items into “Razor Lame 1.1.5”
Go to “Edit” menu, Choose “Lame Options”
o
o
o
o
Under “General” tab “Increase Bit rate” to “192”
Under “Advanced” tab, change “Optimization” to “Quality”
Under “VBR” tab, “Enable” “Variable BitRate” and change “Quality Number” to “9”
Click “Ok” to close dialog box
To run the benchmark:
•
•
Click “Encode” to run benchmark
To view results, Go to “View”, “Last log”, scroll down to end of file
Before running a second run, delete all files from the Razor Lime and re-copy prior to starting
run. Don’t need to reset options.
Return to Castle Wolfenstein 3D (1024x768x32)
•
•
•
•
•
•
Click “Install” and click “Next” to install Return to Castle Wolfenstein
Click “Yes” to accept “License Agreement”
Click “Next” for “Minimum System Requirements”
Enter registration key and click “Ok”
Click “Ok” to confirm registration key
Click “Next” to install to default “Destination Location”
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Click “Next” to install to default “Program Folder”
Click “Install” to “Start Installation”
Click “Ok” for “Hardware Detected”
Click “Yes” to create shortcut on desktop
Select “Register Later” and click “Next”
Click “Finish” to complete setup
Install patch: “wolf_1_1.exe”
Click “Next” to install Return to Castle Wolfenstein Patch
Click “Yes” to accept “License Agreement”
Click “Next” to install to default “Destination Location”
Click “Next” to “Start Installation”
Click “Ok” to continue installation
Click “Finish” to complete installation
Create a directory called “demos” in the “c:\Program Files\Return to Castle
Wolfenstein\Main\Demos” and extract “checkpoint.dem_57” to that directory
Execute “Wolfenstein (Multiplayer)” from desktop
Click “Options,” “System,” and “Graphics”:
Select “Video mode” to “1024x768”
•
•
•
•
•
•
•
Select “Texture detail” to “High”
Click “Apply”
Click “Yes” to apply video settings
Under “Options,” “Game Options,” and “Performance”:
o
o
o
o
Select “Wall Mark Lifetime” to “Long”
Select “Ejecting Brass” to “High”
Select “Dynamic Lights” to “Yes”
Select “Corona Dist” to “Extreme”
•
Under “Options/Game Options/View”:
o
o
o
Select “Cursor Hints” to “Off”
Select “Show Compass” to “Off”
Select “Team Overlay” to “Off”
•
•
Hit “Esc” to return to main menu
Click “Quit” to exit game
To run the benchmark:
•
•
•
•
•
•
Execute “Wolfenstein (Multiplayer)” from desktop
Go into “Options,” “Game Options,” “Performance,” and set “Corona Dist” to “Extreme”
Hit "~" to open console
Type “Timedemo 1”
Type “Demo checkpoint”
Type "~" to view demo results
Serious Sam (1024x768x32)
•
•
•
•
Click “Install” and click “Next” to install “Serious Sam: First Encounter”
Click “Yes” to accept “License Agreement”
Click “Next” for “Information text”
Click “Next” to install to default “Destination Location”
•
•
•
•
•
•
•
•
•
•
•
•
•
Click “Next” to install to default “Setup Type”
Click “Next” to install to default “Program Folder”
Click “Next” to install default name for “Enter Text”
Click “Finish” to complete installation
Install patch for Serious Sam: “Serioussampatch102_USA.exe”
Click “Ok” to choose language setup
Click “Next” to install Update to version 1.02 for “Serious Sam: The First Encounter”
Click “Finish” to complete setup
Insert Serious Sam CD into CD-Rom
Execute Serious Sam
Click “Ok” to start Serious Sam for the first time
Hit “Esc” to enter main menu
Click “Options,” and “Video Options”
o
o
o
Select “Resolution” to “1024x768”
Select “Bits per pixel” to “32”
Select “Preferences” to “Speed”
•
•
•
Click “Apply”
Click “Yes” to keep settings
Click “Esc” to return to main menu
To run the benchmark:
•
•
•
•
•
•
•
Execute Serious Sam from desktop
Hit "~" to launch console
Type “dem_bprofile=1”
Press "~" to return to main menu
Click “Demo”
Select “Karnak Peaceful Night Coop” demo and hit “Enter”
Type "~" and scroll up to view demo results (use the score that is labelled “average without
excessive peaks”)
Serious Sam: Second Encounter - Demo Version (1024x768x32)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Double Click to Install Serious Sam: “serioussamsedemo.exe”
Click “Next” to install Serious Sam: The Second Encounter Demo
Click “Yes” to accept “License Agreement”
Click “Next” for “Information text”
Click “Next” to install to default “Destination Location”
Click “Next” to install to default “Program Folder”
Click “Next” to install default name for “Enter text”
Click “Finish” to complete installation
Execute Serious Sam
Click “Ok” to start Serious Sam for the first time
Hit “Esc” to enter main menu
Click “Options,” and “Video Options”
Select “Resolution” to “1024x768”
Select “Bits per pixel” to “32”
Select “Preferences” to “Speed”
•
•
•
Click “Apply”
Click “Yes” to keep settings
Click “Esc” to return to main menu
To run the benchmark:
•
•
•
•
•
•
•
•
Launch Serious Sam Second Encounter demo from desktop
Hit ESC to get to main menu
Hit "~" to enter console
Type “dem_bprofile=1”
Hit "~" to return to main menu
Click “Demo”
Select “Little Trouble” demo and hit “Enter”
Following the demo, hit "~"
Splinter Cell
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Install Splinter Cell from CD
Click “Next” to continue
Click “No” to update current version of DX9.0
Click “Next” to accept license agreement
Click “Next” to continue
Click “Next” to continue
Click “Next” to continue
Insert Disc 2 and click “OK”
Insert Disc 3 and click “OK”
Click “Next” to continue
Chose “Never Register” and Click “Cancel”
Click “Finish”
Double click to Install patch “scus_CA_Patch_1.2B” (version 7.1.100.124.8)
Click “Ok” to finish patch completion
Go to “C:\Program Files\Ubisoft\Splinter Cell\System\sclow.bat”
Right click on “sclow.bat” and select sub menu item “Edit”
Ensure the “sclow.bat”file reads:
o
o
o
o
splintercell.exe 1_1_1Tbilisi.scl PLAYTIMEDEMO=1_1_1TbilisiDemo.bin -
NOSOUND RESOLUTION=1024X768 SHADOWLEVEL=LOW
SHADOWRESOLUTION=LOW EFFECTSQUALITY=LOW
SHADOWMODE=PROJECTOR
splintercell.exe 1_1_1Tbilisi.scl PLAYTIMEDEMO=1_1_1TbilisiDemo.bin -
NOSOUND RESOLUTION=1024X768 SHADOWLEVEL=LOW
SHADOWRESOLUTION=LOW EFFECTSQUALITY=LOW
SHADOWMODE=PROJECTOR
splintercell.exe 1_1_1Tbilisi.scl PLAYTIMEDEMO=1_1_1TbilisiDemo.bin -
NOSOUND RESOLUTION=1024X768 SHADOWLEVEL=LOW
SHADOWRESOLUTION=LOW EFFECTSQUALITY=LOW
SHADOWMODE=PROJECTOR
splintercell.exe 1_1_2Tbilisi.scl PLAYTIMEDEMO=1_1_2TbilisiDemo.bin -
NOSOUND RESOLUTION=1024X768 SHADOWLEVEL=LOW
SHADOWRESOLUTION=LOW EFFECTSQUALITY=LOW
SHADOWMODE=PROJECTOR
o
o
splintercell.exe 1_1_2Tbilisi.scl PLAYTIMEDEMO=1_1_2TbilisiDemo.bin -
NOSOUND RESOLUTION=1024X768 SHADOWLEVEL=LOW
SHADOWRESOLUTION=LOW EFFECTSQUALITY=LOW
SHADOWMODE=PROJECTOR
splintercell.exe 1_1_2Tbilisi.scl PLAYTIMEDEMO=1_1_2TbilisiDemo.bin -
NOSOUND RESOLUTION=1024X768 SHADOWLEVEL=LOW
SHADOWRESOLUTION=LOW EFFECTSQUALITY=LOW
SHADOWMODE=PROJECTOR
To run the benchmark:
•
•
•
Create a shortcut to the batch files stored in the directory noted above
Input Splinter Cell CD3 into drive
Double click the file on the desktop
Star Wars - Jedi Knight II: Jedi Outcast (1024x768x32)
•
•
•
•
•
•
•
•
•
•
•
Click “Install” to install Jedi Knight II
Click “Next” to install Jedi Knight II: Jedi Outcast
Click “Yes” to accept “License Agreement”
Click “Automatic” installation
Click “Yes” to confirm automatic installation
Click “Exit” installation
Install patch “Jkiiup104.exe”
Click Continue to install
Click OK to continue
Unzip “assets2.pak3” found in GameData\Base folder
Extract the file “jk2ffa.dm_15” to the Base\Demos folder and rename the demo to
“jk2ffa.dm_16”
•
•
Copy renamed demo file to a new directory, “Demos” off of the path c:\program
files\LucasArts\Star Wars JK II Jedi Outcast\GameData\base
Create shortcut to desktop for Jedi Knight II Multi Player: c:\Program Files\LucasArts\Star
Wars JK II Jedi Outcast\GameData\jk2mp.exe
Right click “Shortcut to jk2mp” from desktop and select “Properties”
Type “+set sv_cheats 1” at the end of the “Target Location” for example (“c:\Program
Files\LucasArts\Star Wars JK II Jedi Outcast\GameData\jk2mp.exe” “+set sv_cheats 1)
Click “Ok” to close shortcut
•
•
•
•
Run demo from the command line in the multiplayer game by typing "timedemo 1" and then
"demo jk2ffa"
To run the benchmark:
•
•
•
•
•
Execute Shortcut to jk2mp from desktop
Click “Setup”
Click “Video”
Select “1024x768x32” for Video Mode” and “32-bit” “Color Depth”
Click “Apply Changes”
•
•
•
•
•
•
Click “Yes” to continue to Main Menu
Hit “Shift ~”
Type “timedemo 1”
Type “demo jk2ffa”
Hit “Enter”
Hit “Shift ~” and scroll up to see score
Unreal Tournament (1024x768x32)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Click “Next” to install Unreal Tournament
Click “I Agree” to accept “License Agreement”
Click “Next” to install to default “Destination Location”
Click “Next” to install default components
Click “Install” to install Unreal Tournament
Click “Finish” to complete installation
Install Unreal Tournament patch: UTPatch436.exe
Click “Next” to install Unreal Tournament patch
Click “Next” to install to default “Destination Location”
Click “Next” default CD-Rom location
Click “Install” to install “Unreal Tournament patch”
Click “Finish” to complete installation
Copy “wicked405.dem” into “c:\unrealtournment\system”
Go to Windows “Start” and chose “Unreal Tournament”
Execute “Play Unreal Tournament”
Click “Next” for “First-Time Configurations”
Click “Next” for “First-Time Configurations”
Click “Next” for “First-Time Configurations”
Click “Run” for “First-Time Configurations”
Click “Options” and select “Preferences”
Select “1024x768” “Resolution” and click “Yes” to accept change
Select “32 bit” “Color Depth” and click “Yes” to accept change
Select “Min Desired Frame rate” type “0” and click “Close”
Click “Game” and select “Quit”
To run the benchmark:
•
•
•
•
•
•
•
•
•
•
Execute “Play Unreal Tournament”
Hit “Esc” to enter main menu
Click “Tools” in tool bar and select “Timedemo Statistics”
Hit "~" to go into console mode
Go to “Game” menu
Choose “Start a practice session”
Hit “~” to go to console
Type “demoplay wicked405”
Hit “Enter” followed by "~" to start benchmark
Type "~" to view demo results
Unreal Tournament 2003 (1024x768x32)
•
•
•
•
•
•
•
Install Unreal Tournament 2003 “ut2003demo2206.exe”
Click “Next” to install Unreal Tournament 2003
Click “I Agree” to accept “License Agreement”
Click “Next” to install to default “Destination Location”
Click “Next” to install default components
Click “Install” to install Unreal Tournament 2003
Click “Finish” to complete installation
To run the benchmark:
•
•
To launch benchmark go to “c:\UT2003Demo\System\Benchmark.exe”
Select “1024x768” and click “Start” to launch demo
WinRAR
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Install “ActivePerl-5.8.0.806-mswin32-x86”
Click on “Next” to begin install
Choose “I accept the terms in the license agreement” and click “Next”
Click “Next” for default install
Click “Next” to privacy policy
Click “Next” to default options
Click “Install” to continue
Click “Finish” to complete install
Install “winrar320” from CD
Click “Install” to continue
Click “Ok” to default setup
Click “Done” to complete install
Go to “My computer” and select “C Drive”
Click “File” menu , choose “New folder” and create “rartest”
Copy “rartestpl” file from CD to new folder
To run the benchmark:
•
Double click on the “rartestpl” file which creates a directory with a text file with the test
results
XMPEG
•
•
•
•
•
•
•
Install DIVX from CD folder “DIVX5.03pro”
Click “Next” to begin installation
Click “Next” to “Welcome” note
Click “Next” to “Requirements” note
Click “Yes” to license agreement
Click “Yes” twice o “Gator” privacy agreement
Select “Custom” for “Type of Setup Program” and click “Next”
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Click “Next” to continue
Click “Next” to select default location
Click “Next” to install
Click “Close” upon install
Reboot the system
Install “xmpeg50final” from CD
Choose “English” and click “Next” for language selection
Click “Next” to “Welcome” note
Click “Next” to “Readme” information
Click “Next” to choose destination location for install
Click “Next” to default folder settings
Click “Next” to start file copy
Click “Finish” to complete file copy
Click “Ok” to illegal information
Click “Cancel” to stop video conversion wizard for manual start
Click on reel icon to the left hand side of the “XMPEG” title bar
Select “Open”
o
o
Go to desktop and open the “testfile” that was created under AVI MPG (See above)
Click “Ok”
•
•
Select “Options” from the menu
o
o
Under “Video” tab, unclick “Auto” and click on “YUY2”
Under “Audio” tab, deselect “Same as Input” and select “48000Hz”
Go to menu and choose “Set Plug-In Options”
o
Under “Advanced” tab, select “benchmark mode” and type in “5400” for “Number of
frames asked”
Click “Ok”
o
To run the benchmark:
Go to menu and choose “Start Conversion”
•
相关型号：
©2020 ICPDF网 联系我们和版权申明