PACAC [CALMIRCO]

P/ACTIVE AC TERMINATION NETWORK; P / ACTIVE AC终端网络
PACAC
型号: PACAC
厂家: CALIFORNIA MICRO DEVICES CORP    CALIFORNIA MICRO DEVICES CORP
描述:

P/ACTIVE AC TERMINATION NETWORK
P / ACTIVE AC终端网络

文件: 总2页 (文件大小:127K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
CALIFORNIA MICRO DEVICES  
PACAC  
P/ACTIVE AC TERMINATION NETWORK  
Features  
Applications  
• AC Termination  
• Low Pass Filtering  
• High Frequency Performance  
• Miniature QSOP Package  
• 18 terminating lines/package  
• Stable resistor-capacitor network  
Refer to AP-201 Termination Application Note for  
further information.  
Product Description  
Note: CAMD’s P/Active AC Integrated Resistor-Capacitor Termination Network is an upgraded version of the original  
PRC202/212 series. PACAC provides 2KV ESD protection, minimized lead inductance and parasitic capacitive effects  
(with added ground pins), improved termination characteristics, and frequency response at high data transmission rates.  
The PACAC is recommended for all new designs.  
This integrated thin film resistor-capacitor network is designed to eliminate transmission line effects on high speed data  
lines. Incorporating CAMD’s P/Active AC Integrated Resistor-Capacitor Termination Network will result in improved board  
yields and reliability, minimized space and routing problems on the board, and reduced assembly costs. This highly  
integrated network requires no DC power dissipation.  
Why P/Active termination networks? A terminating RC is used to reduce or eliminate reflections on a transmission line. It  
can perform this function only when its impedance value matches the characteristic impedance of the transmission line across a  
broad frequency spectrum.  
Passive components affect the electrical performance of electronic systems. In reality, every resistor has some parasitic  
series inductance and a parasitic capacitance; and every capacitor has both series resistance and inductance. At low  
speeds, these parasitics do not affect the performance of resistors and capacitors. However, at higher speeds, these  
parasitics cause mismatch in a termination. To prevent these problems in high speed digital designs, a designer must take  
special care in selecting passive components or networks.  
The PACAC family of devices provides consistent and predictable behavior over a higher frequency range than discrete  
components or any previous network products.  
S TA N D A R D S P E C IF IC A TIO N S  
SCHEMATIC CONFIGURATION  
Absolute Tolerance (R)  
± 10%  
Absolute Tolerance (C)  
± 10%  
24 23 22 21 20 19 18 17 16 15 14 13  
Operating Temperature Range  
Crosstalk (See Text Circuit)  
0°C to 70°C  
< 5% (typical)  
100mW  
Power Rating/Resistor  
ESD Clamp  
Positive Clamp  
> 6V  
Negative Clamp  
< -6V  
ESD Protection  
(per MIL-STD-833, Method 3015)  
Storage Temperature  
Package Power Rating  
> 2KV  
-60°C to 150°C  
1.00W, max.  
1
2
3
4
5
6
7
8
9
10 11 12  
S TA N D A R D VA LU E S  
fmax* @  
10%  
1 GHz  
Time  
Constant (ns)  
R() C(pf)  
RC Code  
33  
47  
47  
47  
1.55  
2.21  
1.55  
3.75  
10.0  
330/470  
470/470  
470/330  
750/500  
101/101  
1 GHz  
47  
33  
1 GHz  
75  
50  
1 GHz  
100  
100  
1 GHz  
*Maximum frequency where the real part of the impedance of the AC  
termination is within 10% tolerance of the designed resistance R.  
C0840400  
© 2000 California Micro Devices Corp. All rights reserved.  
4/00  
215 Topaz Street, Milpitas, California 95035  
Tel: (408) 263-3214  
Fax: (408) 263-7846  
www.calmicro.com  
1
CALIFORNIA MICRO DEVICES  
PACAC  
S TA N D A R D P A R T O R D E R IN G IN F O R M A TIO N  
Ordering Part Num ber  
Package  
Pins  
24  
24  
Style  
QSOP  
QSOP  
QSOP  
QSOP  
QSOP  
Tubes  
Tape & Reel  
Part Marking  
RC Code  
330/470  
470/470  
470/330  
750/500  
101/101  
PAC330/470AQ/T  
PAC470/470AQ/T  
PAC470/330AQ/T  
PAC750/500AQ/T  
PAC101/101AQ/T  
PAC330/470AQ/R  
PAC470/470AQ/R  
PAC470/330AQ/R  
PAC750/500AQ/R  
PAC101/101AQ/R  
PAC330/470ACQ  
PAC470/470ACQ  
PAC470/330ACQ  
PAC750/500ACQ  
PAC101/101ACQ  
24  
24  
24  
Crosstalk Test Circuit (TA=25OC)  
1
2
3
4
5
24  
23  
22  
21  
20  
19  
6
7
Victim  
Voltage  
Test Point  
To Victim  
Line  
Pulse Generator  
0 to 5 volt  
10 MHz  
18  
17  
50  
To All  
Terminations  
> 1ns Rise/Fall Time  
8
9
Except Victim Line  
16  
15  
10  
11  
12  
14  
13  
©2000 California Micro Devices Corp. All rights reserved.  
4/00  
215 Topaz Street, Milpitas, California 95035  
Tel: (408) 263-3214  
Fax: (408) 263-7846  
www.calmicro.com  
2

相关型号:

PACAC97

PC AUDIO RESISTOR NETWORK
CALMIRCO

PACAC97Q

PC AUDIO RESISTOR NETWORK
CALMIRCO

PACAC97R

PC AUDIO RESISTOR NETWORK
CALMIRCO

PACAC97T

PC AUDIO RESISTOR NETWORK
CALMIRCO

PACC-MS002

CARTRIDGE HFP PROB
TELEDYNE

PACC-MS005

FREEHAND PROBE HOLDER ZS
TELEDYNE

PACD2404C/R

Trans Voltage Suppressor Diode, Bidirectional, 4 Element, Silicon, CSP-6
CALMIRCO

PACD2408C/R

Trans Voltage Suppressor Diode, Bidirectional, 8 Element, Silicon, CSP-10
CALMIRCO

PACD2416C/R

Trans Voltage Suppressor Diode, Bidirectional, 16 Element, Silicon, CSP-20
CALMIRCO

PACDN002

17 CHANNEL ESD PROTECTION ARRAY
CALMIRCO

PACDN002Q

17 CHANNEL ESD PROTECTION ARRAY
CALMIRCO

PACDN002Q/T

Trans Voltage Suppressor Diode, Unidirectional, 34 Element, Silicon, MO-137AD, QSOP-20
CALMIRCO