AWT6202 [ANADIGICS]
GSM850/GSM900/DCS/PCS Quad Band PowerPlexer with Integrated Power Control; GSM850 / GSM900 / DCS / PCS四频PowerPlexer ,集成功率控制型号: | AWT6202 |
厂家: | ANADIGICS, INC |
描述: | GSM850/GSM900/DCS/PCS Quad Band PowerPlexer with Integrated Power Control |
文件: | 总12页 (文件大小:210K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AWT6202
GSM850/GSM900/DCS/PCS
Quad Band PowerPlexerTM
with Integrated Power Control
ADVANCED PRODUCT INFORMATION - Rev 0.3
FEATURES
•
ANADIGICS developed technologies
PRODUCT DESCRIPTION
(InGaP HBT/pHEMT)
High Module Efficiency:
The AWT6202 is the third generation GSM
PowerPlexerTM. It has been developed to minimize time
to market for GSM handset and PDA designers.
•
45% GSM900 (Equivalent 57% PA Efficiency)
40% DCS (Equivalent 52% PA Efficiency)
Fully Compliant Harmonics Under Mismatch
Integrated Power Control Scheme
Integrated Reference Voltage
This highly integrated module requires only basic RF
decoupling and DC blocking on the receive and
antenna ports. All the RF ports are 50 ꢀ. The part also
has an excellent ESD rating of 1 kV on RF inputs and
15 kV on the antenna port.
•
•
•
•
•
•
•
•
•
•
Integrated PA/Switch/Low Pass Filters
Symmetrical low loss receive paths
High isolation switch (TX to RX, RX on/off)
ESD protected antenna port (15 kV)
Small footprint (6 mm x 6 mm x 1.0 mm)
GPRS capable (class 12)
The temperature stability of the high gain HBT PAs are
ideal for supporting class 12 GPRS, while the low loss
pHEMT switch provides high isolation with very low
current consumption.
Power control range >50dB
The integrated power control scheme reduces the
number of external components associated with a
power control function, and facilitates fast and easy
production calibration. The power control range is
typically 55 dB.
APPLICATIONS
•
Dual/Tri/Quad BandHandsets and PDAs
DCS/PCS
DCS/PCS_IN
DCS_RX
CNTL1
CNTL2
CNTL3
VBATT
Logic/Power
Controller
ANT
CEXT
VRAMP
GSM850_RX
GSM_IN
GSM850/900
Figure 1: Functional Block Diagram
02/2005
AWT6202
ELECTRICAL CHARACTERISTICS
Table 1: Absolute Minimum and Maximum Ratings
PARAMETER
MIN
MAX
+7
UNIT
V
Supply Voltage (VCC
)
-
Input Power (RFIN
Power Control Voltage (VRAMP
Storage Temperature (TSTG
Maximum Reflow Temperature
)
-
-
+11
1.8
dBm
V
)
)
-55
150
°C
-
240
°C
Exceeding the absolute maximum ratings can cause permanent damage to the de-
vice. These are absolute stress ratings only. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operations
sections of this data sheet. Exposure to maximum ratings for extended periods can
adversely affect device reliability.
Table 2: ESD Ratings
PARAMETER
METHOD
HBM
RATING
UNIT
kV
ESD Threshold Voltage (Antenna Port)
ESD Threshold Voltage (Control Inputs)
ESD Threshold Voltage (RF Inputs)
ESD Threshold Voltage (RX Ports)
15
1
HBM
kV
HBM
1
kV
HBM
300
V
Although protection circuitry has been designed into this device, proper precau-
tions should be taken to avoid exposure to electrostatic discharge (ESD) during
handling and mounting. Human body model HBM employed is resistance = 1500Ω,
capacitance = 100pF.
Table 3: Logic Level Definitions
(VCC = 3.0 to 4.8 V, TC = 25 ± 3 °C)
PARAMETER
VOH
MIN
1.2
-0.2
-
TYP
MAX
3
UNIT
V
-
-
-
VOL
0.5
10
V
ꢀA
Input Bias Current
ADVANCED PRODUCT INFORMATION - Rev 0.3
2
02/2005
AWT6202
Table 4: Logic Control Table
MODE
CNTL 1
CNTL2
CNTL3
DESCRIPTION
Low current state where module is
disabled.
SHUTDOWN
0
0
0
This mode enables a low loss path
from the antenna to GSM850_RX
port. PAs are disabled.
GSM850_RX_EN
GSM900_RX_EN
DCS_RX_EN
1
0
1
0
1
1
1
0
0
This mode enables a low loss path
from the antenna to GSM900_RX
port. PAs are disabled.
This mode enables a low loss path
from the antenna to DCS_RX port.
PAs are disabled.
This mode enables a low loss path
from the antenna to PCS_RX port.
PAs are disabled.
PCS_RX_EN
GSM_TX_EN
0
1
0
0
1
0
Switch is in transmit mode and
GSM850/900 PA is enabled.
Switch is in transmit mode and
DCS/PCS PA is enabled.
DCS_PCS_TX_EN
Not USed
1
0
1
1
1
1
Not Used. PAs Disabled.
Table 5: Control Timing
PARAMETER
MIN TYP MAX UNITS
COMMENTS
ꢀs
ꢀs
ꢀs
ꢀs
Switching Delay from RX to TX Mode
Switching Delay from TX to RX Mode
Switching Delay from RX to Shutdown
Switching Delay from TX to Shutdown
-
-
-
-
0.5
0.5
0.5
0.5
-
-
-
-
Time for power at antenna to rise
from -10 dBm to within 0.2 dB of
maximum output power.
ꢀs
ꢀs
P
P
OUT Rise Time
OUT Fall Time
-
-
1
1
-
-
Time for power at antenna to fall
from maximum output power to
within 0.2 dB of -10 dBm.
ADVANCED PRODUCT INFORMATION - Rev 0.3
3
02/2005
AWT6202
Table 6: Operating Ranges
PARAMETER
MIN
TYP
MAX
UNIT
V
COMMENTS
Supply Voltage (VBATT
Power Down Current
RX Current (VBATT = 4.8 V)
Control Voltage (VRAMP
RAMP Input Capacitance
Case Temperature (T
Duty Cycle
)
3.0
3.5
4.8
ꢀA
0
-
10
(VBATT = 4.8 V)
ꢀA
0
0.2
-
-
-
30
1.6
-
V
)
V
3
-
pF
°C
%
C
)
-20
-
85
50
-
Parametric performance is guaranteed under specified operating conditions.
Table 7: Receiver Specifications
(Mode = RX (see control table), VBATT = 3.5 V, ZIN = ZOUT = 50 ꢀ, TC = 25 ± 3 °C)
PARAMETER
MIN
TYP
MAX
UNIT
Comments
GSM850/900
Insertion loss
F
IN = 869 to 960 MHz, VBATT = 3.0 to 4.8 V,
-
1.0
-
dB
T = -20 to +85°C
C
DCS/PCS
F
IN = 1805 to 1990 MHz ,
= -20 to +85°C
VBATT = 3.0 to 4.8 V,
-
1.2
-
dB
Insertion loss
T
C
15
15
25
25
-
-
-
-
-
-
-
-
-
dB
dB
dB
dB
F
F
F
F
IN = 869 to 960 MHz
IN = 1805 to 1990 MHz
IN = 869 to 960 MHz
IN = 1805 to 1990 MHz
Receiver Return loss
-
Receiver Isolation
ANT to RX_OFF
-
-10
-13
dBm GSM850/900 POUT = 33.2 dBm
dBm DCS/PCS POUT = 30.3 dBm
TX Power at RX ports
-
ADVANCED PRODUCT INFORMATION - Rev 0.3
4
02/2005
AWT6202
Table 8: GSM850/900 Electrical Specification
(Mode = GSM_TX_EN, VBATT = 3.5 V, ZIN = ZOUT = 50 ς, TC = 25 ± 3 °C, PIN = 3 dBm,
PWIDTH = 1154 ꢁs, Duty Cycle = 25%)
PARAMETER
Frequency (FIN
Input Power (PIN
MIN
TYP
MAX
UNITS
COMMENTS
824
880
-
-
849
915
MHz
MHz
)
)
0
3
5
-
dBm
dBm
Output Power (POUT
)
33.2
33.7
V
RAMP = 1.6 V
BATT = 3.0 V, VRAMP = 1.6 V,
V
P
Degraded Output Power
30.8
-
31.7
45
-
-
dBm
%
IN = 0 dBm, T = 85°C
C
Module Efficiency
(PA+Switch+Filter)
V
V
RAMP = 1.6 V, PIN = 3 dBm,
BATT = 3.5 V
P
IN = 5 dBm, VBATT = 3 to 4.8 V
Forward Isolation 1
-
-
-55
-25
-51
-10
dBm
dBm
Mode = GSM900_RX_EN or
GSM850_RX_EN, see control table
V
V
RAMP = 0.2 V, PIN = 5 dBm,
BATT = 3 to 4.8 V
Forward Isolation 2
Mode = GSM_TX_EN, see control
table
Harmonic
2nd
-
-
-40
-40
-
-
V
P
BATT = 3 to 4.8 V,
dBm
dBm
3fo to 12.75 GHz
OUT = 5 to 33.2 dBm
VSWR =10:1 All angles
Stability:
< 1GHz
> 1GHz
V
P
BATT = 3 to 4.8 V,
-
-
-
-
-36
-30
OUT = 5 to 33.2 dBm,
T
C
= -20 to 85 °C
P
V
P
IN = 5 dBm,
BATT = 4.8 V,
Ruggedness
10:1
-
-
VSWR
dBm
OUT = 5 to 33.2 dBm,
All phases of load
F
F
IN = 849 MHz
-88
-84
OUT = 869 to 894 MHz
-
-
RBW = VBW = 100 kHz,
P
OUT = 5 to 33.2 dBm
F
F
IN = 915 MHz
OUT = 925 to 935 MHz
RX Band Noise
Input VSWR
-81
-78
dBm
dBm
RBW = VBW = 100 kHz,
P
OUT = 5 to 33.2 dBm
F
F
IN = 915 MHz
OUT = 935 to 960 MHz
-
-
-88
-
-84
RBW = VBW = 100 kHz,
P
OUT = 5 to 33.2d Bm
2.5:1
All power levels
ADVANCED PRODUCT INFORMATION - Rev 0.3
5
02/2005
AWT6202
Table 9: DCS/PCS Electrical Specification
(Mode = DCS_PCS_TX_EN, VBATT = 3.5 V, ZIN = ZOUT = 50 ꢀ, TC = 25 ± 3 °C, PIN = 3 dBm,
PWIDTH = 1154 ꢁs, Duty Cycle = 25%)
PARAMETER
Frequency (FIN
Input Power (PIN
MIN
TYP
MAX
UNITS
COMMENTS
1710
1850
-
-
1785
1910
MHz
MHz
)
)
0
3
5
-
dBm
dBm
30.3
31.3
V
RAMP = 1.6 V
Output Power DCS/PCS (POUT
)
Degraded Output Power
V
P
BATT = 3.0 V, VRAMP = 1.6 V,
IN = 0 dBm, Tc = 85°C
28.0
-
29.0
40
-
-
dBm
%
Module Efficiency
(PA+Switch+Filter)
V
P
BATT = 3.5 V, VRAMP = 1.6 V,
IN = 3 dBm,
P
IN = 5 dBm, VBATT = 3 to 4.8 V
Forward Isolation 1
-
-
-
-55
-25
-40
-51
-10
-
dBm Mode = DCS_RX_EN or
PCS_RX_EN, see control table
V
V
RAMP = 0.2 V, PIN = 5 dBm,
BATT = 3 to 4.8 V
Forward Isolation 2
dBm
Mode = DCS_PCS_TX_EN,
see control table
Harmonics
V
P
BATT = 3 to 4.8 V,
2fo to 12.75 GHz
dBm
dBm
OUT = 0 to 30.3dBm
VSWR =10:1 All angles
Stability:
< 1GHz
> 1GHz
V
P
BATT = 3 to 4.8 V,
-
-
-
-
-36
-30
OUT = 0 to 30.4 dBm,
T
C
= -20 to 85 °C
P
P
IN = 5 dBm, VBATT = 4.8 V,
OUT = 0 to 30.3 dBm,
Ruggedness:
10:1
-
-
VSWR
All phases of load
F
F
IN = 1785 or 1910 MHz,
OUT = 1805 to 1880 MHz, or
RX Band Noise
Input VSWR
-
-
-88
-
-84
dBm 1930 to 1990 MHz
P
OUT = 0 to 30.3 dBm,
RBW = VBW = 100 kHz
All power levels
2.5:1
ADVANCED PRODUCT INFORMATION - Rev 0.3
6
02/2005
AWT6202
Figure 2: Pinout (X-Ray View)
Note: unassigned pins
are ground pads
Table 10: Pinout Description
PIN
1
NAME
FUNCTION
PIN
15
16
17
18
19
20
21
22
23
24
25
26
27
28
NAME
GND
FUNCTION
DCS/PCS_IN DCS/PCS RF Input
Ground
2
CNTL1
CNTL2
CNTL3
Control logic input
Control logic input
Control logic input
Battery supply connection
Bypass
GSM900_RX GSM900 receive port
GSM850_RX GSM850 receive port
3
4
GND
ANT
Ground
5
V
BATT
EXT
RAMP
Antenna port
DCS receive port
PCS receive port
Ground
6
C
DCS_RX
PCS_RX
GND
7
V
Analog input for power control
GSM850/900 RF Input
Ground
8
GSM_IN
GND
9
GND
Ground
10
11
12
13
14
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
ADVANCED PRODUCT INFORMATION - Rev 0.3
7
02/2005
AWT6202
APPLICATION INFORMATION
* May be required to filter baseband noise
Figure 3: Recommended Application Circuit
ADVANCED PRODUCT INFORMATION - Rev 0.3
8
02/2005
AWT6202
NOTES
ADVANCED PRODUCT INFORMATION - Rev 0.3
9
02/2005
AWT6202
NOTES
ADVANCED PRODUCT INFORMATION - Rev 0.3
10
02/2005
AWT6202
NOTES
ADVANCED PRODUCT INFORMATION - Rev 0.3
11
02/2005
AWT6202
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without
notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are
subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are
assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges
customers to verify that the information they are using is current before placing orders.
WARNING
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS
product in any such application without written consent is prohibited.
ADVANCED PRODUCT INFORMATION - Rev 0.3
12
02/2005
相关型号:
AWT6221RM28P9
HELP3TM Dual-band Cellular/PCS UMTS 3.4 V HSPA Linear Power Amplifier Module
ANADIGICS
AWT6221RM28Q7
HELP3TM Dual-band Cellular/PCS UMTS 3.4 V HSPA Linear Power Amplifier Module
ANADIGICS
AWT6222
HELP3TM Tri-band US Cellular/Japan Cellular/IMT UMTS/WCDMA Linear Power Amplifier Module
ANADIGICS
AWT6222RM28P9
HELP3TM Tri-band US Cellular/Japan Cellular/IMT UMTS/WCDMA Linear Power Amplifier Module
ANADIGICS
AWT6222RM28Q7
HELP3TM Tri-band US Cellular/Japan Cellular/IMT UMTS/WCDMA Linear Power Amplifier Module
ANADIGICS
AWT6223RM26P8
WCDMA/GSM/GPRS/Polar EDGE Power Amplifier Module with Integrated Power Control
ANADIGICS
AWT6223RM26P9
WCDMA/GSM/GPRS/Polar EDGE Power Amplifier Module with Integrated Power Control
ANADIGICS
©2020 ICPDF网 联系我们和版权申明