ODiSI6100-R [ADATA]
Optical Distributed Sensor Interrogator;
| 型号： | ODiSI6100-R |
| 厂家： | 
ADATA Technology Co., Ltd. |
| 描述： | Optical Distributed Sensor Interrogator |
| 文件： | 总8页 (文件大小：2246K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
D E F Y I N G I M P O S S I B L E
KEY FEATURES
ODiSI 6100
• Multichannel measurements of strain -
multiplex up to 200,000 measurement
locations
Optical Distributed Sensor Interrogator
The ODiSI is a 21st century
strain and temperature
measurement system
• Flexible, lightweight and easy to install
sensors reduce time to first measurement
specifically designed to
address the test challenges
of 21st century advanced
• Passive, corrosion resistant, dielectric,
flexible sensors go where other sensors
can’t - in bends, around corners,
embedded inside materials
materials and systems.
The ODiSI provides more than 1000 strain or temperature measurements
per meter of a single high definition fiber sensor. The high definition data
can fully map the contour of strain or temperature for a structure under test.
• Long sensor life - no drift or recalibration
required, cycle counts >107
• Large strain range and high resolution
allow for mapping of complex strain
fields and large strain gradients
The sensor is flexible, low profile, requires no electrical source, and can be
bonded to sharply curved surfaces, embedded within structures, or mounted
directly to electrical surfaces.
APPLICATIONS
• Characterize strain on/in new materials
and complex structures
• Profile temperature in-situ to maximize
the efficiency of critical processes
• Measure two- and three-dimensional
strain fields to validate FE models
• Evaluate multi-material joining
An automotive frame is instrumented with fiber and then tested
under load. Test data is then superimposed on the CAD model.
• Embed sensors within materials to
create “smart parts”
www.lunainc.com | 3155 State Street, Blacksburg VA | Support phone: 1.866.586.2682 | solutions@lunainc.com
ODiSI 6100
ODiSI 6100 BASE CONFIGURATION
ncluded with Base Configuration:
•
ODiSI 6100 mainframe configured with 1 to 8
active measurement channels
•
ODiSI laptop controller laptop running single
function Linux OS and ODiSI operating software
and associated cabling
•
•
One 50m, rugged stand-off cable per channel
to connect ODiSI interrogator and one “remote
module”per channel which connects ODiSI
sensors to the stand-off cable
Standard configuration also includes a rugged
shipping case, sample fiber sensors (HD) and
Luna’s fiber optic sensor application kit
Additional Base
Configuration Features:
Real-time streaming data
•
Stream measurements in real-time
at the maximum measurement rate
to a file or via TCP-IP to another
computer
Ease of Integration / Ease of Use
•
Intuitive , easy to setup and use
graphical user interface
•
IEEE 1588 PTP (Precision Time
Protocol) synchronization
Json-based digital streaming data
Sync output TTL pulse
•
•
Reliability
•
Continuous automatic optical
alignment without user intervention
System and sensor health check
ensures high data fidelity
•
Traceability
•
Optical frequencies validated
every acquisition for accurate
measurements
•
Strain sensors and associated
coefficients calibrated with NIST
traceable fixtures
ODiSI 6100 Graphical User Interface
ODiSI 6100 Preliminary Data Sheet
ODiSI 6100
ODiSI 6100 STANDARD SENSOR CONFIGURATION
ODiSI comes configured to measure standard “Rayleigh”High-Definition
Fiber Optic Sensors (HD-FOS). These are our most economical sensors
based on measurement of the Rayleigh backscatter in optical fiber and
are best suited for static or quasi-static applications. HD sensors are also
perfect for measuring large strain gradients. The table below outlines
the sensor lengths and associated resolutions one can achieve with the
standard/base configuration ODiSI 6100.
1-8 Standard Length HD Sensors -
Strain Range
http://www.henkel-adhesives.com/
Measurement Rates
Max Length
2.5m
5m
10m
2.6mm
1.3mm
0.65mm 15Hz 10Hz
62Hz 40Hz 25Hz
31Hz 20Hz 12Hz
±12k ꢀstrain
±12k ꢀstrain
±12k ꢀstrain
Transform Structural Testing
Gage Spacing
ODiSI is ideal for strain measurements on
and in composite materials. From materials
characterization, to FE model verification all the
way to full scale test.
6Hz
Accelerate Design
With continuous, high resolution mapping
of strain and temperature, “hot spots”and
large strain gradients are easily located and
accurately characterized.
Ensure Quality
With no “line of sight”issues and the ability
to bond to curved and otherwise difficult to
gage locations, ODiSI sensors go where no
other sensors can so you get the full picture
of performance.
Graphical depiction of an 8-channel ODiSI 6100 (6108) configuration
showing stand-off cables, remote modules and sensors
ODiSI 6100 Preliminary Data Sheet
ODiSI 6100
OPTIONAL FEATURES
EXTENDED RANGE FEATURE
This feature allows up to four channels of the ODiSI 6100 to measure strain sensors over lengths up to 50m.
•
•
•
Adds 20m and 50m sensing length on 4 channels
Channels must be purchased separately
Each additional channel requires an extended length HD-FOS remote module (sold separately)
Extended - Measurement Rates
Strain Range
Max Length
20m
2.6mm 13Hz
1.3mm 6Hz
0.65mm 3Hz
50m
5Hz
2.5Hz
X
±12k ꢀstrain
±12k ꢀstrain
±12k ꢀstrain
Gage Spacing
HIGH SPEED CONTINUOUS FIBER GRATING SENSORS (HS-CFG)
This feature allows the use of Luna’s continuous fiber Bragg grating (CFG) sensors. HS-CFG sensors provide enable
larger signal to noise and higher speed measurements leading to higher performance in dynamic environments.
•
•
Feature is available on all active channels
HS-CFG sensors require additional, dedicated remote modules
HS-CFG Sensors - Measurement Rates
Strain Range
Max Length
2m
2.6mm 160Hz
1.3mm 80Hz
0.65mm 40Hz
5m
100Hz
50Hz
25Hz
±3.3k ꢀstrain
±±.5k ꢀstrain
±15k ꢀstrain
Gage Spacing
RAYLEIGH ACCELERATOR
This feature accelerates the measurement speeds for HD Rayleigh sensors (HD-FOS) by a factor of 4x. This option is
ideal for applications that require the high data rates over large strain ranges. Rayleigh Accelerator is field upgradeable
through a combination of software and the addition of a small, Thunderbolt® 3 expansion chassis with accelerator card.
1-8 Standard Length HD Sensors - Measurement Rates
Strain Range
Max Length
2.5m
5m
10m
2.6mm 250Hz 160Hz 100Hz
1.3mm 125Hz 80Hz 50Hz
0.65mm 62.5Hz 40Hz 25Hz
±12k ꢀstrain
±12k ꢀstrain
±12k ꢀstrain
Gage Spacing
1-4 Extended Length HD Sensors - Measurement Rates
Strain Range
Max Length
20m
2.6mm 50Hz
1.3mm 25Hz
0.65mm 12.5Hz
50m
20Hz
12.5Hz
X
±12k ꢀstrain
±12k ꢀstrain
±12k ꢀstrain
Gage Spacing
ODiSI 6100 Preliminary Data Sheet
ODiSI 6100
OPTIONAL FEATURES (continued)
3D VISUALIZATION SOFTWARE
ODiSI 3D Visualization Software allows strain or temperature data to be visualized in three
dimensions directly on a CAD drawing of the test article. Load an .stl file of the test article,
map sensor routing and view temperature or strain in three dimensions. Create movies of
the evolution strain and temperature over time to gain greater insight into your design.
•
•
•
•
Easily interpret and communicate complex data
Visualize large data files using contour and 3D mapping
Quickly focus on critical areas of interest in space and/or time
Visualize and share ODiSI data mapped on imported .stl files
ODiSI 6100 Preliminary Data Sheet
ODiSI 6100
PERFORMANCE
PARAMETER
SPECIFICATION
UNITS
Gage Spacing
2.6 mm 1.3 mm 0.65 mm
HD Standard Length Performance - Strain
Range
±12,000 ±12,000 ±12,000
ꢀϵ
ꢀϵ
ꢀϵ
ꢀϵ
%
Resolution
Accuracy1
Repeatability at zero strain2
Repeatability across full strain range3
Dynamic Loading Rate
1
1
1
±25
< ±20
±0.55
1
±30
< ±5
±0.15
5
±30
< ±10
±0.35
2.5
Hz
HD Standard Length Performance - Temperature
Maximum Temperature (Based on standard sensor.
Custom sensors available upon request.)
Minimum Temperature (Based on standard sensor.
Custom sensors available upon request.)
300
-40
300
-40
300
-40
°C
°C
Resolution
0.1
-
0.1
-
0.1
-
°C
°C
%
Accuracy (consult factory)
Repeatability
±0.01
±0.03
±0.06
HD Extended Length Performance - Strain
Range
±12,000 ±12,000 ±12,000
ꢀϵ
ꢀϵ
ꢀϵ
ꢀϵ
%
Resolution
Accuracy1
1
1
1
±30
±30
±25
Repeatability at zero strain2
Repeatability across full strain range3
Dynamic Loading Rate
Continuous Fiber Grating Performance - Strain
Range
< ±20
±0.15
< ±30
±0.15
< ±40
±0.55
Hz
±3,300
1
±±,500 ±15,000
ꢀϵ
ꢀϵ
ꢀϵ
ꢀϵ
%
Resolution
Accuracy1
Repeatability at zero strain2
Repeatability across full strain range3
1
1
±15
< ±5
±1
±25
< ±10
±1
±35
< ±20
±0.5
Dynamic Loading Rate
10
10
10
Hz
NOTES
1. Accuracy reflects ODiSI measurements compared to NIST traceable extensiometer measurements. Data based on average of 150 scans at
each of seven increments of strain, from 0 to maximum strain.
2. Repeatability at zero strain refers to offset from zero with no strain applied. NO filtering is applied.
3. Repeatability across strain range refers to average repeatability over full strain range. Repeatability is measured and reflects 2σ standard
deviation from the mean with sample size of 150 scans. NO filtering is applied.
4. Specifications are subject to change at any time
ODiSI 6100 Preliminary Data Sheet
ODiSI 6100
ENVIRONMENTAL
RAYLEIGH
ACCELERATOR
ENVIRONMENTAL
ODiSI 6100
ODiSI CONTROLLER (LAPTOP)
UNITS
Class 1 Laser
<10
N/A
N/A
mW
°C
Operating Temperature Range
5 - 40
0 - 40
0 - 35
20-90
Storage Temperature Range
0 - 40
-40 - 70
10 - 90
°C
Operating Relative Humidity
(non-condensing)
10 - 90
% RH
Storage Relative Humidity
(non-condensing)
10 - 90
10 - 95
% RH
ft (m)
Operating Altitude
-50 to 10,000 (-15 to 3,000)
-50 to 10,000 (-15 to 3,000)
PHYSICAL
PHYSICAL
Dimensions W x D x H
Weight
ODiSI 6100
ODiSI CONTROLLER (LAPTOP)
RAYLEIGH ACCELERATOR
UNITS
in (cm)
lb (Kg)
13.5 x 13.9 x 4.3
(34 x 35 x 11)
14 x 9.3 x 0.7
(36 x 24 x 17)
5.6 x 8.6 x 3.5
(14 x 22 x 9)
13 (6)
50
4 (1.8)
130
3.7 (1.7)
60
Power
W
m
Stand Off Cable
50
N/A
N/A
CERTIFICATIONS
ODiSI 6100 Preliminary Data Sheet
ODiSI 6100
ORDERING INFORMATION
Catalog Number
Description
Includes
ODiSI 6100
ODiSI 6100 Multi-channel Distributed Sensing Instrument controller, one channel enabled, HD
ODiSI 6100-R
Instrument. -R denotes rack mount option.
standard length mode (2.5m, 5m, 10m sensor
lengths), one 50m stand-off cable, one remote
module (to connect sensors), and ruggedized
shipping case.
OPT6100-N
OPT6110
N additional ODiSI 6100 channels up to ±
High Speed CFG Option
Includes 50m standoff cable and remote mod-
ule for each channel.
Adds high speed continuous fiber grating sen-
sor option to all active channels. Includes one
remote module.
OPT6115
OPT6120
Extended Range Option
Rayleigh (HD) Accelerator
Adds 20m and 50m HD sensing option on all
active channels. Note: only 4 channels can be
active simultaneously. Includes one remote
module.
Increases measurement rates in HD/
Rayleigh mode for 2.5m, 5m, and 10m
modes up to 250Hz, 160Hz and 100 Hz.
Includes Thunderbolt® 3 Expansion Chassis
and Accelerator Card.
Catalog Number
HDSXXLC220P
HDSXXLC300P
Sensors Description
XXm HD strain sensor, LC2+connector, Polyimide coating, 220 °C
XXm HD strain sensor, LC2+connector, Polyimide coating, 300 °C
XXm HS CFG strain sensor, LC2+connector, Polyimide coating, 200 °C
XXm HD temperature sensors with Teflon sleeving, 220 °C
HSSXXLC200C
HDTXXLC220P
Luna Sales and Support Contact Information
United States, Canada, South America
Europe, Middle East, Africa
+44 (0)131 666 9044
Asia Pacific
+86 135 012± ±±39
1.866.LUNA OVA (866.586.2682)
solutions@lunainc.com
www.lunainc.com | 3155 State Street, Blacksburg VA | Support phone: 1.866.586.2682 | solutions@lunainc.com
LTODiSI6 Rev.1 10/20/1±
相关型号：
©2020 ICPDF网 联系我们和版权申明