ETH3006FP-M3 [VISHAY]
Hyperfast Rectifier, 30 A FRED Pt; 超快整流器, 30 A FRED铂型号: | ETH3006FP-M3 |
厂家: | VISHAY |
描述: | Hyperfast Rectifier, 30 A FRED Pt |
文件: | 总9页 (文件大小:197K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VS-ETH3006-M3, VS-ETH3006FP-M3
Vishay Semiconductors
Hyperfast Rectifier, 30 A FRED Pt®
FEATURES
• Hyperfast soft recovery time
• Low forward voltage drop
• 175 °C operating junction temperature
• Low leakage current
• Fully isolated package (VINS = 2500 VRMS
• True 2 pin package
)
2L TO-220AC
2L TO-220 FULL-PAK
Base
cathode
2
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
• Designed and qualified according to JEDEC-JESD47
1
3
1
2
DESCRIPTION/APPLICATIONS
Cathode
Anode
Cathode
Anode
Hyperfast recovery rectifiers designed with optimized
performance of forward voltage drop, hyperfast recovery
time, and soft recovery.
VS-ETH3006-M3
VS-ETH3006FP-M3
PRODUCT SUMMARY
The planar structure and the platinum doped life time control
guarantee the best overall performance, ruggedness and
reliability characteristics.
Package
2L TO-220AC, 2L TO-220FP
IF(AV)
30 A
600 V
VR
These devices are intended for use in PFC boost stage in the
AC/DC section of SMPS, inverters or as freewheeling
diodes.
VF at IF
2.65 V
27 ns
trr (typ.)
TJ max.
Diode variation
The extremely optimized stored charge and low recovery
current minimize the switching losses and reduce over
dissipation in the switching element and snubbers.
175 °C
Single die
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Peak repetitive reverse voltage
VRRM
600
V
TC = 131 °C
C = 51 °C
TJ = 25 °C
Average rectified forward current in DC
IF(AV)
30
FULL-PAK
T
A
Non-repetitive peak surge current
IFSM
180
Operating junction and storage temperatures
TJ, TStg
- 65 to 175
°C
ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNITS
Breakdown voltage,
blocking voltage
VBR
VR
,
IR = 100 μA
IF = 30 A
600
-
-
V
-
-
-
-
-
-
2.0
1.4
0.02
50
2.65
1.8
30
300
-
Forward voltage
VF
IR
IF = 30 A, TJ = 150 °C
VR = VR rated
Reverse leakage current
μA
TJ = 150 °C, VR = VR rated
VR = 600 V
Junction capacitance
Series inductance
CT
LS
20
pF
nH
Measured lead to lead 5 mm from package body
8
-
Document Number: 93523
Revision: 18-Apr-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETH3006-M3, VS-ETH3006FP-M3
Hyperfast Rectifier, 30 A FRED Pt®
Vishay Semiconductors
DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
IF = 1 A, dIF/dt = 50 A/μs, VR = 30 V
TJ = 25 °C
MIN.
TYP.
MAX.
UNITS
-
-
-
-
-
-
-
26
35
-
Reverse recovery time
trr
26
ns
TJ = 125 °C
70
-
IF = 30 A
TJ = 25 °C
3.5
7.6
50
-
Peak recovery current
IRRM
dIF/dt = 200 A/μs
TJ = 125 °C
A
-
V
R = 200 V
TJ = 25 °C
-
Reverse recovery charge
Qrr
nC
TJ = 125 °C
280
-
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNITS
Maximum junction and storage
temperature range
TJ, TStg
- 65
-
175
°C
-
-
0.84
3.2
1.3
3.8
Thermal resistance,
junction to case
RthJC
FULL-PAK
Thermal resistance,
junction to ambient
°C/W
RthJA
RthCS
Typical socket mount
-
-
-
70
-
Typical thermal resistance,
case to heatsink
Mounting surface, flat, smooth and
greased
0.5
-
-
2
-
-
g
Weight
0.07
oz.
6
(5)
12
(10)
kgf · cm
(lbf · in)
Mounting torque
Marking device
-
Case style 2L TO-220AC
ETH3006
ETH3006FP
Case style 2L TO-220 FULL-PAK
www.vishay.com
2
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 93523
Revision: 18-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETH3006-M3, VS-ETH3006FP-M3
Hyperfast Rectifier, 30 A FRED Pt®
Vishay Semiconductors
1000
100
1000
100
10
175°C
150°C
125°C
100°C
75°C
50°C
10
1
0.1
0.01
0.001
0.0001
25°C
Tj = 175°C
0
100
200
300
400
500
600
ReverseVoltage-VR(V)
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage
1000
Tj = 150°C
100
10
1
Tj = 25°C
1
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
Forward Voltage Drop-VF (V)
0
100
200
300
400
500
600
ReverseVoltage-VR(V)
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage
Fig. 1 - Typical Forward Voltage Drop Characteristics
10
D = 0.5
1
0.1
D = 0.2
D = 0.1
D = 0.05
D = 0.02
D = 0.01
Single Pulse
(Thermal Resistance)
0.01
1E-05
1E-04
1E-03
1E-02
1E-01
1E+00
t1,RectangularPulseDuration(Seconds)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
Document Number: 93523
Revision: 18-Apr-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETH3006-M3, VS-ETH3006FP-M3
Hyperfast Rectifier, 30 A FRED Pt®
Vishay Semiconductors
10
D = 0.5
D = 0.2
D = 0.1
1
D = 0.05
Single Pulse
(Thermal Resistance)
D = 0.02
D = 0.01
0.1
1E-05
1E-04
1E-03
1E-02
1E-01
1E+00
1E+01
1E+02
t1,RectangularPulseDuration(Seconds)
Fig. 5 - Maximum Thermal Impedance ZthJC Characteristics (FULL-PAK)
180
160
140
120
100
180
170
160
150
140
130
120
80
DC
DC
60
40
20
0
5
10 15 20 25 30 35
0
5
10 15 20 25 30 35
AverageForwardCurrent-IF(AV)(A)
AverageForwardCurrent-IF(AV)(A)
Fig. 6 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 7 - Maximum Allowable Case Temperature vs.
Average Forward Current (FULL-PAK)
80
60
40
20
0
RMS Limit
D = 0.01
D = 0.02
D = 0.05
D = 0.1
D = 0.2
D = 0.5
DC
0
5
10 15 20 25 30 35 40 45
AverageForwardCurrent-IF(AV)(A)
Fig. 8 - Forward Power Loss Characteristics
www.vishay.com
4
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 93523
Revision: 18-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETH3006-M3, VS-ETH3006FP-M3
Hyperfast Rectifier, 30 A FRED Pt®
Vishay Semiconductors
90
80
70
60
50
40
30
20
10
900
800
700
600
500
400
300
200
100
0
If = 30 A, 125°C
If = 30 A, 125°C
If = 30 A, 25°C
typical value
If = 30 A, 25°C
typical value
100
1000
100
1000
di F /dt (A/µs)
Fig. 9 - Typical Reverse Recovery vs. dIF/dt
diF/dt (A/µs)
Fig. 10 - Typical Stored Charge vs. dIF/dt
VR = 200 V
0.01 Ω
L = 70 μH
D.U.T.
D
dIF/dt
adjust
IRFP250
G
S
Fig. 11 - Reverse Recovery Parameter Test Circuit
(3)
trr
IF
ta
tb
0
(4)
Qrr
(2)
IRRM
0.5 IRRM
(5)
dI(rec)M/dt
0.75 IRRM
dIF/dt
(1)
(4) Qrr - area under curve defined by trr
(1) dIF/dt - rate of change of current
and IRRM
through zero crossing
trr x IRRM
(2) IRRM - peak reverse recovery current
Qrr
=
2
(3) trr - reverse recovery time measured
from zero crossing point of negative
going IF to point where a line passing
through 0.75 IRRM and 0.50 IRRM
extrapolated to zero current.
(5) dI(rec)M/dt - peak rate of change of
current during tb portion of trr
Fig. 12 - Reverse Recovery Waveform and Definitions
Document Number: 93523
Revision: 18-Apr-11
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
5
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VS-ETH3006-M3, VS-ETH3006FP-M3
Hyperfast Rectifier, 30 A FRED Pt®
Vishay Semiconductors
ORDERING INFORMATION TABLE
Device code
VS-
E
T
H
30
06
FP -M3
1
2
3
4
5
6
7
8
1
-
Vishay Semiconductors product
Circuit configuration:
E = Single diode
2
-
3
4
5
6
7
-
-
-
-
-
T = TO-220
H = Hyperfast recovery time
Current code: 30 = 30 A
Voltage code: 06 = 600 V
None = TO-220
FP = FULL-PAK
Environmental digit:
8
-
-M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free
ORDERING INFORMATION (Example)
PREFERRED P/N
VS-ETH3006-M3
VS-ETH3006FP-M3
QUANTITY PER TUBE
MINIMUM ORDER QUANTITY
PACKAGING DESCRIPTION
Antistatic plastic tube
50
50
1000
1000
Antistatic plastic tube
LINKS TO RELATED DOCUMENTS
2L TO-220AC
www.vishay.com/doc?95259
Dimensions
2L TO-220 FULL-PAK
2L TO-220AC
www.vishay.com/doc?95260
www.vishay.com/doc?95391
www.vishay.com/doc?95392
Part marking information
2L TO-220 FULL-PAK
www.vishay.com
6
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 93523
Revision: 18-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Outline Dimensions
Vishay High Power Products
True 2 Pin TO-220
DIMENSIONS in millimeters and inches
0.002"
A
0.05 mm
A
E
Ø P
F
B
Q
H1
D
Term. 4
0.150" REF.
45°
Ø 2.0 mm REF.
L1
b1
L
b
c
60°
1
2
J1
e
MILLIMETERS
MAX.
4.57
INCHES
SYMBOL
MIN.
4.32
0.71
1.15
0.36
MIN.
0.170
0.028
0.045
0.014
0.590
0.395
MAX.
0.180
0.036
0.055
0.021
0.610
0.410
A
b
0.91
b1
c
1.39
0.53
D
E
14.99
10.04
15.49
10.41
5.08 BSC
1.37
e
0.200 BSC
F
1.22
5.97
2.54
13.47
3.31
3.79
2.60
0.048
0.235
0.100
0.530
0.130
0.149
0.102
0.054
0.255
0.110
0.550
0.150
0.153
0.112
H1
J1
L
6.47
2.79
13.97
3.81
(1)
L1
Ø P
Q
3.88
2.84
Notes
(1)
Lead dimension and finish uncontrolled in L1
•
•
These dimensions are within allowable dimensions of JEDEC TO-220AB rev. J outline dated 3-24-87
Controling dimension: Inch
Document Number: 95259
Revision: 21-Jan-10
For technical questions concerning discrete products, contact: diodestech@vishay.com
For technical questions concerning module products, contact: indmodules@vishay.com
www.vishay.com
1
Outline Dimensions
Vishay High Power Products
True 2 Pin TO-220 FULL-PAK
DIMENSIONS in millimeters and inches
A
Ø Q
F
E
Q1
H1
D
Q2
θ
L1
b1
L
b
C
e
J1
MILLIMETERS
INCHES
SYMBOL
MIN.
MAX.
4.93
MIN.
0.178
0.028
0.045
0.014
0.617
0.392
MAX.
0.194
0.036
0.055
0.021
0.633
0.408
A
b
4.53
0.71
1.15
0.36
15.67
9.96
0.91
b1
C
1.39
0.53
D
16.07
10.36
E
e
5.08 typical
0.200 typical
F
2.34
6.50
2.56
12.78
2.23
2.98
3.10
14.80
0°
2.74
6.90
2.96
13.18
2.63
3.38
3.50
15.20
5°
0.092
0.256
0.101
0.503
0.088
0.117
0.122
0.583
0°
0.107
0.272
0.117
0.519
0.104
0.133
0.138
0.598
5°
H1
J1
L
L1
Ø Q
Q1
Q2
θ
Document Number: 95260
Revision: 22-Jan-10
For technical questions concerning discrete products, contact: diodestech@vishay.com
For technical questions concerning module products, contact: indmodules@vishay.com
www.vishay.com
1
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
相关型号:
ETHERNET_AU1000_REV003
Writing an Ethernet Device Driver for the AMD Alchemy? Solutions Au1000? Processor?
ETC
©2020 ICPDF网 联系我们和版权申明