DG442LEDY-GE3 [VISHAY]
SPST,;DG441LE, DG442LE
www.vishay.com
Vishay Siliconix
16 , Low Charge Injection and Leakage,
+12 V / +5 V / +3 V / 5 V ꢀQad ꢁSꢁꢂ ꢁwitcheꢃ
DESCRIPTION
The DG441LE,
single-pole-single-throw analog switches are designed to
provide high speed, low error switching of analog signals.
The DG441LE has a normally closed function. The DG442LE
has a normally open function.
FEATURES
• 3 V to 16 V single supply or 3 V to 8 V dual
supply
• On-resistance RDS(on): 16
• Fast switching tON: 18 ns,typ.
• Low parasitic capacitance:
DG442LE
monolithic
quad
Available
Available
CD(ON): 15 pF
CS(OFF): 5 pF
• Less than 8 pC charge injection over the full
signal swing range
• Low leakage: < 10 pA, typ.
• TTL, CMOS compatible
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
The DG441LE, DG442LE feature low charge injection of a
few picocoulombs over the full analog switch range.
Combining low on resistance (16 , typ.), low parasitic
capacitance (CD(ON) 15 pF), and fast switching speed
(tON, 18 ns, typ.), the devices are ideal for data acquisition,
sample-and-hold, and ADC input circuit designs.
Available
The DG441LE, DG442LE operate on single and dual
supplies. Single supply voltage ranges from 3 V to 16 V while
dual supply operation is recommended with 3 V to 8 V.
Each switch conducts equally well in both direction when
on, and blocks input voltages up to the supply levels when
off.
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
BENEFITS
• Wide operation voltage range
• Low signal errors and distortion
• Fast switching time
The DG441LE, DG442LE are available in 16 lead TSSOP,
SOIC, and PDIP packages.
• Minimized switching glitch
APPLICATIONS
• Automatic test equipment
• Process control and automation
• Data acquisition systems
• Meters and instruments
• Medical and healthcare systems
• Communication systems
• Audio and video signal routing
• Relay replacement
• Battery powered systems
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
Dual-In-Line, TSSOP and SOIC
IN
D
IN
D
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1
1
1
2
TRUTH TABLE
2
LOGIC
DG441LE
On
DG442LE
Off
0
1
S
S
2
Off
On
Logic “0” 0.8 V
Logic “1” 2.4 V
V-
V+
DG441LE / 442LE
GND
NC
Top View
S
4
S
3
D
4
D
3
IN
4
IN
3
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
1
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
Vishay Siliconix
OODERING INFORMATION
ꢂEMS. RANGE
CONFIGURAꢂION
SACKAGE
SARꢂ NUMBER
DG441LEDQ-GE3
DG441LEDQ-T1-GE3
DG441LEDY-GE3
DG441LEDY-T1-GE3
DG441LEDJ-GE3
DG442LEDQ-GE3
DG442LEDQ-T1-GE3
DG442LEDY-GE3
DG442LEDY-T1-GE3
DG442LEDJ-GE3
MIN. ORDER / SACK. ꢀUANꢂIꢂY
Tube 360 units
16-pin TSSOP
Tape and reel, 3000 units
Tube 500 units
DG441LE
DG442LE
16-pin SOIC
16-pin PDIP
16-pin TSSOP
Tape and reel, 2500 units
Tube 500 units
-40 °C to +85 °C
Lead (Pb)-free
Tube 360 units
Tape and reel, 3000 units
Tube 500 units
16-pin SOIC
16-pin PDIP
Tape and reel, 2500 units
Tube 500 units
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
SARAMEꢂER
ꢁYMBOL
LIMIꢂ
-0.3 to +18
18
UNIꢂ
V+ to V-
GND to V-A
V
GND -0.3 to (V +) + 0.3
or 30 mA, whichever occurs first
Digital Inputs a VS, VD
Continuous Current (any terminal)
30
100
mA
°C
Current, S or D (pulsed 1 ms, 10 % duty cycle)
(DQ, DY suffix)
(AK suffix)
16-pin TSSOP c
-65 to +125
-65 to +150
450
Storage Temperature
Power Dissipation (packages) b
16-pin narrow body SOIC d
16-pin CerDIP e
650
mW
900
ESD Human Body Model (HBM); per ANSI / ESDA / JEDEC® JS-001
2500
V
Latch Up Current, per JESD78D
400
mA
Noteꢃ
a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 7 mW/°C above 75 °C.
d. Derate 7.6 mW/°C above 75 °C.
e. Derate 12 mW/°C above 75 °C.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
2
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
Vishay Siliconix
SPECIFICATIONS a (single supply 12 V)
ꢂEꢁꢂ CONDIꢂIONꢁ
A ꢁUFFIX
LIMIꢂꢁ
D ꢁUFFIX
LIMIꢂꢁ
UNLEꢁꢁ OꢂHERWIꢁE
ꢁSECIFIED
SARAMEꢂER
ꢁYMBOL
ꢂEMS.b ꢂYS. c -55 °C to +125 °C -40 °C to +85 °C UNIꢂ
V+ = 12 V, V- = 0 V
MIN. d MAX. d MIN. d MAX. d
V
IN = 2.4 V, 0.8 V f
Analog ꢁwitch
Analog Signal Range e
VANALOG
RDS(on)
Full
Room
Full
-
16
-
0
-
12
26
40
0
-
12
26
35
V
Drain-Source
On-Resistance
V+ = 10.8 V, V- = 0 V
IS = 10 mA, VD = 2 V / 9 V
-
-
On-Resistance Match
RDS(on)
IS = 10 mA, VD = 9 V
Room
0.1
-
0.5
-
0.5
Between Channels e
Room
Full
-
-
-
-
-
-
-1
-15
-1
1
15
1
-1
-10
-1
1
10
1
IS(off)
VD = 1 V / 11 V,
VS = 11 V / 1 V
Switch Off Leakage Current
Channel On Leakage Current
Room
Full
ID(off)
ID(on)
nA
-15
-1
15
1
-10
-1
10
1
Room
Full
VS = VD = 11 V / 1 V
-15
15
-10
10
Digital Control
Input Current, VIN Low
Input Current, VIN High
Dynamic Characteriꢃticꢃ
IIL
VIN under test = 0.8 V
VIN under test = 2.4 V
Full
Full
0.01
-
-1.5
-1.5
1.5
1.5
-1
-1
1
1
μA
ns
IIH
Room
Full
18
-
-
-
-
-
-
-
-
-
-
-
60
80
35
50
-
-
-
-
-
-
-
-
-
-
-
60
70
35
45
-
Turn-On Time
tON
RL = 300 , CL = 35 pF
VS = 5 V, see figure 2
Room
Full
18
-
Turn-Off Time
tOFF
Charge Injection e
Off Isolation e
Q
Vg = 0 V, Rg = 0 , CL = 10 nF Room
6.6
68.4
114
5
pC
dB
OIRR
XTALK
CS(off)
CD(off)
CD(on)
Room
-
-
RL = 50 , CL = 5 pF,
Channel-to-Channel Crosstalk e
Source Off Capacitance e
Drain Off Capacitance e
Channel On Capacitance e
Sower ꢁQpplieꢃ
Room
Room
Room
Room
-
-
f = 1 MHz
-
-
f = 1 MHz
6
-
-
pF
15
-
-
Positive Supply Current
I +
I -
Full
Room
Full
0.03
-
-
1.5
-
1
-
-1
-
-
-
-1
-5
-1
Negative Supply Current
Ground Current
VIN = 0 V or 12 V
μA
0.002
0.002
-7.5
-1.5
-
IGND
Full
-
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
3
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
Vishay Siliconix
SPECIFICATIONS a (dual supply 5 V)
ꢂEꢁꢂ CONDIꢂIONꢁ
A ꢁUFFIX
LIMIꢂꢁ
D ꢁUFFIX
LIMIꢂꢁ
UNLEꢁꢁ OꢂHERWIꢁE
ꢁSECIFIED
SARAMEꢂER
ꢁYMBOL
ꢂEMS.b ꢂYS. c -55 °C to +125 °C -40 °C to +85 °C UNIꢂ
V+ = 5 V, V- = -5 V
MIN. d MAX. d MIN. d MAX. d
V
IN = 2.4 V, 0.8 V f
Analog ꢁwitch
Analog Signal Range e
VANALOG
RDS(on)
Full
Room
Full
-
18
-
-5
-
5
-5
-
5
V
30
42
30
37
Drain-Source
On-Resistance
V+ = 5 V, V- = -5 V
IS = 10 mA, VD
=
3.5 V
-
-
On-Resistance Match
RDS(on)
IS = 10 mA, VD
=
3.5 V
Room
0.1
-
0.5
-
0.5
Between Channels e
Room
Full
-
-
-
-
-
-
-1
-15
-1
1
15
1
-1
-10
-1
1
10
1
IS(off)
Switch Off
V+ = 5.5, V- = -5.5 V
VD 4.5 V, VS = 4.5 V
Leakage Current g
=
Room
Full
ID(off)
ID(on)
nA
-15
-1
15
1
-10
-1
10
1
Room
Full
Channel On
V+ = 5.5 V, V- = -5.5 V
VS = VD 4.5 V
Leakage Current g
=
-15
15
-10
10
Digital Control
Input Current, VIN Low e
Input Current, VIN High e
Dynamic Characteriꢃticꢃ
IIL
VIN under test = 0.8 V
VIN under test = 2.4 V
Full
Full
0.05
0.05
-1.5
-1.5
1.5
1.5
-1
-1
1
1
μA
ns
IIH
Room
Full
42
-
-
-
-
-
-
-
65
90
45
65
-
-
-
-
-
-
-
65
75
45
55
-
Turn-On Time
tON
RL = 300 , CL = 35 pF
VS = 3.5 V, see figure 2
Room
Full
34
-
Turn-Off Time
tOFF
Charge Injection e
Off Isolation e
Q
Vg = 0 V, Rg = 0 , CL = 10 nF Room
5.8
68.4
pC
dB
OIRR
Room
-
-
RL = 50 , CL = 5 pF, f = 1 MHz
Channel-to-Channel
Crosstalk e
XTALK
Room
113
-
-
-
-
Source Off Capacitance e
Drain Off Capacitance e
Channel On Capacitance e
Sower ꢁQpplieꢃ
CS(off)
CD(off)
CD(on)
Room
5
6
-
-
-
-
-
-
-
-
-
-
-
-
f = 1 MHz
Room
Room
pF
μA
14
Positive Supply Current e
I +
I -
Full
0.002
-
1.5
-
1
-
Room -0.002
-1
-
-
-
-1
-5
-1
Negative Supply Current e
Ground Current e
VIN = 0 V or 5 V
Full
Full
-
-7.5
-1.5
-
IGND
-0.002
-
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
4
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
Vishay Siliconix
SPECIFICATIONS a (single supply 5 V)
ꢂEꢁꢂ CONDIꢂIONꢁ
A ꢁUFFIX
LIMIꢂꢁ
D ꢁUFFIX
LIMIꢂꢁ
UNLEꢁꢁ OꢂHERWIꢁE
ꢁSECIFIED
SARAMEꢂER
ꢁYMBOL
ꢂEMS.b ꢂYS. c -55 °C to +125 °C -40 °C to +85 °C UNIꢂ
V+ = 5 V, V- = 0 V
MIN. d MAX. d MIN. d MAX. d
V
IN = 2.4 V, 0.8 V f
Analog ꢁwitch
Analog Signal Range e
VANALOG
RDS(on)
Full
Room
Full
-
36
-
-
-
-
5
-
-
-
5
V
50
88
50
75
Drain-Source
V + = 4.5 V
On-Resistance e
IS = 5 mA, VD = 1 V, 3.5 V
IS = 10 mA, VD = 3.5 V
On-Resistance Match
RDS(on)
Room
0.5
-
1
-
1
Between Channels e
Dynamic Characteriꢃticꢃ
Room
Hot
53
-
-
-
-
-
-
70
90
50
70
-
-
-
-
-
-
70
80
50
60
-
Turn-On Time e
tON
RL = 300 , CL = 35 pF
ns
VS = 3.5 V, see figure 2
Room
Hot
34
-
Turn-Off Time e
tOFF
Q
Charge Injection e
Vg = 0 V, Rg = 0 , CL = 10 nF Room
3.3
pC
Sower ꢁQpplieꢃ
Positive Supply Current e
I +
I -
Full
10
-
200
-
-1
100
Room -0.002
-1
-
-
-
-
-
-
Negative Supply Current e
Ground Current e
VIN = 0 V or 5 V
μA
Full
Full
-
-7.5
-200
-5
IGND
-10
-100
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
5
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
Vishay Siliconix
SPECIFICATIONS a (single supply 3 V)
ꢂEꢁꢂ CONDIꢂIONꢁ
A ꢁUFFIX
LIMIꢂꢁ
D ꢁUFFIX
LIMIꢂꢁ
UNLEꢁꢁ OꢂHERWIꢁE
ꢁSECIFIED
SARAMEꢂER
ꢁYMBOL
ꢂEMS.b ꢂYS. c -55 °C to +125 °C -40 °C to +85 °C UNIꢂ
V+ = 3 V, V- = 0 V
MIN. d MAX. d MIN. d MAX. d
V
IN = 0.4 V f
Analog ꢁwitch
Analog Signal Range e
VANALOG
RDS(on)
Full
Room
Full
-
106
-
0
-
3
0
-
3
V
130
150
130
140
Drain-Source
On-Resistance
V+ = 2.7 V, V- = 0 V
IS = 5 mA, VD = 0.5 V, 2.2 V
-
-
On-Resistance Match
RDS(on)
IS = 5 mA, VD = 2.2 V
Room
1
-
3
-
3
Between Channels e
Room
Full
-
-
-
-
-
-
-1
-15
-1
1
15
1
-1
-10
-1
1
10
1
IS(off)
Switch Off
V+ = 3.3, V- = 0 V
D = 1 V, 2 V, VS = 2 V, 1 V
Leakage Current g
V
Room
Full
ID(off)
ID(on)
nA
-15
-1
15
1
-10
-1
10
1
Room
Full
Channel On
V+ = 3.3 V, V- = 0 V
VS = VD = 1 V, 2 V
Leakage Current g
-15
15
-10
10
Digital Control
Input Current, VIN Low e
Input Current, VIN High e
Dynamic Characteriꢃticꢃ
IIL
VIN under test = 0.4 V
VIN under test = 2.4 V
Full
Full
0.005
0.005
-1.5
-1.5
1.5
1.5
-1
-1
1
1
μA
ns
IIH
Room
Full
141
-
-
-
-
-
-
-
200
220
120
140
-
-
-
-
-
-
-
200
210
120
130
-
Turn-On Time
tON
RL = 300 , CL = 35 pF
VS = 1.5 V, see figure 2
Room
Full
84
-
Turn-Off Time
tOFF
Charge Injection e
Off Isolation e
Q
Vg = 0 V, Rg = 0 , CL = 10 nF Room
2
pC
dB
OIRR
Room
68
-
-
RL = 50 , CL = 5 pF, f = 1 MHz
Channel-to-Channel
Crosstalk e
XTALK
Room
107
-
-
-
-
Source Off Capacitance e
Drain Off Capacitance e
Channel On Capacitance e
CS(off)
CD(off)
CD(on)
Room
6
7
-
-
-
-
-
-
-
-
-
-
-
-
f = 1 MHz
Room
Room
pF
15
Noteꢃ
a. Refer to PROCESS OPTION FLOWCHART.
b. Room = 25 °C, full = as determined by the operating temperature suffix.
c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing.
d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet.
e. Guaranteed by design, not subject to production test.
f.
VIN = input voltage to perform proper function.
g. Leakage parameters are guaranteed by worst case test conditions and not subject to test.
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
6
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
30
25
20
15
10
5
35
30
25
20
15
10
5
+125 °C
+125 °C
+85 °C
+85 °C
-55 °C
-55 °C
+25 °C
-40 °C
+25 °C
-40 °C
V+ = +12 V
IS = 10 mA
V
=
5 V
IS = 10 mA
0
0
0
1
2
3
4
5
6
7
8
9
10 11 12
-5
-4
-3
-2
-1
0
1
2
3
4
5
VD - Analog Voltage (V)
VD - Analog Voltage (V)
RDꢁ(on) vꢃ. Analog Voltage and ꢂemperatQre
RDꢁ(on) vꢃ. Drain Voltage and ꢂemperatQre
90
80
70
60
50
40
30
20
10
0
24
22
20
18
16
14
12
10
8
V+ = +3 V
TA = 25 °C
TA = 25 °C
IS = 10 mA
IS = 10 mA
V
=
5 V
V+ = +5 V
V+ = +12 V
V+ = +16 V
V
=
4
8 V
6
0
2
4
6
8
10
12
14
16
-8
-6
-4
-2
0
2
6
8
VD - Analog Voltage (V)
VD - Analog Voltage (V)
RDꢁ(on) vꢃ. Analog Voltage
RDꢁ(on) vꢃ. Analog Voltage
40
30
V+ = +5 V
ID(ON)
20
10
0
-10
-20
-30
-40
ID(OFF)
IS(OFF)
-5
-4
-3
-2
-1
0
1
2
3
4
5
VD - Drain Voltage (V), VS = -VD
Leakage CQrrent vꢃ. Drain Voltage
(DQal ꢁQpply)
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
7
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
150
140
130
120
110
100
90
120
110
100
90
80
70
60
50
40
30
20
10
0
Single Supply
Dual Supply
80
tON
70
60
50
tON
tOFF
40
30
tOFF
20
10
0
2
4
6
8
10
12
14
16
3
4
5
6
7
8
V+ - Positive Supply Voltage (V)
V+/- - Positive Supply Voltage (V)
ꢁwitching ꢂime vꢃ. ꢁingle ꢁQpply
ꢁwitching ꢂime vꢃ. DQal ꢁQpply
20
18
16
14
12
10
8
20
18
16
14
12
10
8
Single Supply
Dual Supply
CD(ON), V+ = +3 V
CD(ON), V+ = +5 V
CD(ON), V
=
5 V
CD(ON), V+ = +12 V
CD(OFF), V+ = +3 V
CD(OFF), V+ = +5 V
CD(OFF), V+ = +12 V
CD(OFF), V
=
5 V
6
6
4
4
CS(OFF), V+ = +3 V
CS(OFF), V+ = +5 V
CS(OFF), V
=
5 V
2
2
CS(OFF), V+ = +12 V
10 11 12
0
0
0
1
2
3
4
5
6
7
8
9
-5
-4
-3
-2
-1
0
1
2
3
4
5
Analog Voltage (V)
Analog Voltage (V)
Capacitance vꢃ. Analog Voltage
(ꢁingle ꢁQpply)
Capacitance vꢃ. Analog Voltage
(DQal ꢁQpply)
50
45
40
35
30
25
20
15
+125 °C
+85 °C
-40 °C
+25 °C
V+ = +5 V
S = 10 mA
-55 °C
I
10
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
VD - Analog Voltage (V)
RDꢁ(on) vꢃ. Analog Voltage and ꢂemperatQre
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
8
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
Vishay Siliconix
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
10
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0
-10
Insertion Loss, -3dB = 301 MHz
-20
VIH
-30
V+ = +3 V
V- = 0 V
-40
VIL
-50
OIRR
-60
-70
XTALK
-80
-90
-100
-110
-120
100K
1M
10M
100M
1G
2
4
6
8
10
12
14
16
V+ - Positive Supply Voltage (V)
Frequency (Hz)
InpQt ꢂhreꢃhold vꢃ. ꢁingle ꢁQpply Voltage
Inꢃertion Loꢃꢃ, Off Iꢃolation and Croꢃꢃtalk vꢃ. FreqQency
(ꢁingle ꢁQpply)
10.0
9.0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0
100
V+ = 12 V
90
V+ = +5.5 V
V- = 0 V
IN = 0 V
80
V
=
5 V
70
60
50
40
30
20
10
0
V+ = 5 V
V+ = 3 V
-5 -4 -3 -2 -1
0
1 2 3 4 5 6 7 8 9 10 11 12
-40
-20
0
20
40
60
80
100 120
VD - Analog Voltage (V)
Temperature (°C)
Charge Injection vꢃ. Analog Voltage
ꢁQpply CQrrent vꢃ. ꢂemperatQre
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
9
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
Vishay Siliconix
SCHEMATIC DIAGRAM (typical channel)
V+
S
Level
Shift/
Drive
V
IN
D
GND
V-
Fig. 1
TEST CIRCUITS
V+
V+
3 V
0 V
Logic
Input
t < 20 ns
r
t < 20 ns
f
50 % 50 %
S
D
V
S
V
O
t
OFF
Switch
Input
V
S
IN
R
1 kΩ
C
L
L
V
O
80 %
80 %
35 pF
3 V
GND
V-
Switch
Output
0 V
t
ON
V-
C
L
(includes fixture and stray capacitance)
Note:
Logic input waveform is inverted for DG442.
Fig. 2 - ꢁwitching ꢂime
V+
V+
ΔV
O
V
O
R
g
S
D
IN
X
V
OFF
ON
ON
OFF
OFF
O
(DG441)
IN
C
1 nF
L
3 V
V-
V-
GND
OFF
IN
X
Q = ΔV x C
O
L
(DG442)
Fig. 3 - Charge Injection
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
10
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
TEST CIRCUITS
Vishay Siliconix
C = 1 µF tantalum in parallel with 0.01 µF ceramic
V+
V+
C
S
D
D
V
1
1
S
R
g
= 50 Ω
50 Ω
IN
1
0 V, 2.4 V
V
O
L
S
2
2
NC
R
IN
2
0 V, 2.4 V
GND
V-
V-
C
V
S
X
Isolation = 20 log
TA L K
V
O
C = RF bypass
Fig. 4 - Croꢃꢃtalk
V+
C
V+
V
O
S
D
V
S
R
= 50 Ω
g
R
L
IN
0 V, 2.4 V
GND
V-
C
V-
V
V
S
Off Isolation = 20 log
O
Fig. 5 - Off Iꢃolation
V+
C
S
D
V+
Meter
IN
HP4192A
Impedance
Analyzer
0 V, 2.4 V
or Equivalent
GND
V-
C
V-
Fig. 6 - ꢁoQrce / Drain Capacitanceꢃ
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
11
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DG441LE, DG442LE
www.vishay.com
APPLICATIONS
Vishay Siliconix
+ 24 V
+ 12 V
R
L
V+
I = 3A
DG442L
150 Ω
10 kΩ
+ 12 V
IN
VN0300L, M
+ 12 V
V
IN
1/4 DG442L
S
D
+
-
V
OUT
+
-
+ 12 V
C
H
GND
V-
IN
0 V
H = Sample
L = Hold
0 = Load Off
1 = Load On
Fig. 7 - Sower MOꢁFEꢂ Driver
Fig. 8 - Open Loop ꢁample-and-Hold
V
IN
+
-
V
OUT
+ 12 V
V+
Gain error is determined only by the resistor
tolerance. Op amp offset and CMRR will limit ac-
curacy of circuit.
GAIN
1
R
90 kΩ
1
A
= 1
V
With SW Closed
4
R
2
5 kΩ
GAIN
2
A
= 10
V
V
R + R + R + R
1 2 3 4
OUT
=
= 100
V
R
4
IN
R
4 kΩ
3
GAIN
3
A
= 20
V
R
1 kΩ
4
GAIN
4
A
= 100
V
DG441L or DG442L
V-
GND
V
Fig. 9 - Sreciꢃion-Weighted Reꢃiꢃtor Srogrammable-Gain Amplifier
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?76754.
S16-0392-Rev. A, 07-Mar-16
Document Number: 76754
12
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Package Information
Vishay Siliconix
SOIC (NARROW): 16ĆLEAD
JEDEC Part Number: MS-012
MILLIMETERS
INCHES
Dim
A
A1
B
C
D
Min
1.35
0.10
0.38
0.18
9.80
3.80
Max
1.75
0.20
0.51
0.23
10.00
4.00
Min
Max
0.069
0.008
0.020
0.009
0.393
0.157
0.053
0.004
0.015
0.007
0.385
0.149
E
16 15
14 13
12 11
10
7
9
8
1.27 BSC
0.050 BSC
e
H
L
Ĭ
5.80
0.50
0_
6.20
0.93
8_
0.228
0.020
0_
0.244
0.037
8_
E
1
2
3
4
5
6
ECN: S-03946—Rev. F, 09-Jul-01
DWG: 5300
H
D
C
All Leads
0.101 mm
0.004 IN
A1
Ĭ
L
e
B
Document Number: 71194
02-Jul-01
www.vishay.com
1
Package Information
Vishay Siliconix
PDIP: 16ĆLEAD
16
1
15
2
14
3
13
4
12
5
11
6
10
7
9
8
E
E
1
D
S
Q
1
A
L
A
1
15°
MAX
C
e
1
B
B
1
e
A
MILLIMETERS
INCHES
Min
Dim
A
A1
B
B1
C
D
Min
3.81
0.38
0.38
0.89
0.20
18.93
7.62
5.59
2.29
7.37
2.79
1.27
0.38
Max
5.08
1.27
0.51
1.65
0.30
21.33
8.26
7.11
2.79
7.87
3.81
2.03
1.52
Max
0.200
0.050
0.020
0.065
0.012
0.840
0.325
0.280
0.110
0.310
0.150
0.080
0.060
0.150
0.015
0.015
0.035
0.008
0.745
0.300
0.220
0.090
0.290
0.110
0.050
.015
E
E1
e1
eA
L
Q1
S
ECN: S-03946—Rev. D, 09-Jul-01
DWG: 5482
Document Number: 71261
06-Jul-01
www.vishay.com
1
Package Information
Vishay Siliconix
TSSOP: 16-LEAD
DIMENSIONS IN MILLIMETERS
Symbols
Min
-
Nom
1.10
0.10
1.00
0.28
0.127
5.00
6.40
4.40
0.65
0.60
1.00
-
Max
1.20
0.15
1.05
0.38
-
A
A1
A2
B
0.05
-
0.22
-
C
D
4.90
6.10
4.30
-
5.10
6.70
4.50
-
E
E1
e
L
0.50
0.90
-
0.70
1.10
0.10
6°
L1
y
θ1
0°
3°
ECN: S-61920-Rev. D, 23-Oct-06
DWG: 5624
Document Number: 74417
23-Oct-06
www.vishay.com
1
PAD Pattern
Vishay Siliconix
www.vishay.com
RECOMMENDED MINIMUM PAD FOR TSSOP-16
0.193
(4.90)
0.055
(1.40)
0.012
(0.30)
0.026
0.014
(0.35)
(0.65)
Recommended Minimum Pads
Dimensions in inches (mm)
Revision: 02-Sep-11
Document Number: 63550
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Application Note 826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR SO-16
0.372
(9.449)
0.047
(1.194)
0.022
0.050
0.028
(0.559)
(1.270)
(0.711)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index
www.vishay.com
24
Document Number: 72608
Revision: 21-Jan-08
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
DG444BDN-E3
IC QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, QCC16, 4 X 4 MM, QFN-16, Multiplexer or Switch
VISHAY
©2020 ICPDF网 联系我们和版权申明