BFC2336669009 [VISHAY]
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.0068 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT;![BFC2336669009](http://pdffile.icpdf.com/pdf2/p00247/img/icpdf/BFC233666900_1501369_icpdf.jpg)
型号: | BFC2336669009 |
厂家: | ![]() |
描述: | CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.0068 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT 电容器 |
文件: | 总12页 (文件大小:130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
MKP336 6 Y2
Vishay BCcomponents
Interference Suppression Film Capacitors
MKP Radial Potted Type
FEATURES
w
l
• 10 mm to 15 mm lead pitch. Supplied loose in
box, taped on reel
• Compliant to RoHS Directive 2002/95/EC
h
PERMISSIBLE DC VOLTAGE
DC 1000 V
ENCAPSULATION
lt
Plastic case, epoxy resin sealed, flame retardant
UL-class 94 V-0
Ø dt
P
0.4
Dimensions in mm
CLIMATIC TESTING CLASS ACC. TO
EN 60068-1
NO FOCUS PRODUCT: USE MKP 338 6 Y2
APPLICATIONS
Y2 class
55/105/56/B
For Y2 electromagnetic interference suppression between
line and ground applications (50 Hz/60 Hz) with a maximum
CAPACITANCE RANGE (E12 SERIES)
E12 series 0.001 µF to 0.047 µF
Preferred values acc. to E6
mains voltage of 300 VAC
.
For application limitations refer to section “Application Notes”
CAPACITANCE TOLERANCE
REFERENCE STANDARDS
“IEC 60384-14 2nd edition and EN 132400”
“IEC 60065 requires, pass. flamm. class B”
250 V: UL 1414; CSA-C22.2 No 1;
300 V: UL 1283; ENEC
20 %; 10 %
LEADS
Tinned wire
MARKING
MAXIMUM APPLICATION TEMPERATURE
C-value; tolerance; rated voltage; sub-class; manufacturer’s
type designation; code for dielectric material; manufacturer
location; year and week
105 °C
DETAIL SPECIFICATION
DIELECTRIC
Polypropylene film
For more detailed data and test requirements contact:
RFI@vishay.com
ELECTRODES
Metallized film
CONSTRUCTION
Series construction (for > 10 mm pitch)
Triple construction (for > 7.5 mm and 10 mm pitch)
RATED VOLTAGE
AC 300 V; 50 Hz to 60 Hz
Document Number: 28115
Revision: 22-Dec-10
For technical questions, contact: RFI@vishay.com
www.vishay.com
1
MKP336 6 Y2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES
MULTIPLIER
(nF)
336 6
Y2
10.0 mm
15.0 mm
CAPACITANCE
(numerically)
0.1
1
2
3
Example:
103 = 10 x 1 = 10 nF
BFC2 336 6X XX X
2222(*) 336 6X XX X
(*) Old ordering code
TYPE
PACKAGING
LEAD CONFIGURATION
C-TOL
PREFERRED TYPES
lead length 3.5 mm + 1 mm/- 0.5 mm (pitch = 10 mm) or
3.5 mm 0.3 mm (pitch = 15 mm)
336 6
Y2
BFC2 336 60...
loose in box
20 %
lead length 25.0 mm 2.0 mm
BFC2 336 66...
ON REQUEST
lead length 3.5 mm + 1 mm/- 0.5 mm (pitch = 10 mm) or
3.5 mm 0.3 mm (pitch = 15 mm)
BFC2 336 61...
loose in box
10 %
336 6
Y2
lead length 25.0 mm 2.0 mm
BFC2 336 67...
BFC2 336 63...
BFC2 336 64...
20 %
10 %
H = 18.5 mm; P0 = 12.7 mm;
reel diameter 500 mm
taped on reel (1)
Note
(1) For detailed tape specification refer to Packaging Information: www.vishay.com/docs/28139/packinfo.pdf
SPECIFIC REFERENCE DATA
DESCRIPTION
VALUE
Rated AC voltage (URAC
)
300 V
Permissible DC voltage (URDC
)
1000 V
at 10 kHz
≤ 10 x 10- 4
200 V/µs
Tangent of loss angle
Rated voltage pulse slope (dU/dt)R at 420 VDC
R between leads, for C ≤ 0.33 µF at 100 V; 1 min
R between leads and case; 100 V; 1 min
> 15 000 MΩ
> 30 000 MΩ
3400 V; 1 min
2100 V; 1 min
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time ≤ 1000 V/s
Withstanding (AC) voltage between leads and case
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
www.vishay.com
2
For technical questions, contact: RFI@vishay.com
Document Number: 28115
Revision: 22-Dec-10
MKP336 6 Y2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
MKP 336 6 GENERAL DATA
URAC = 300 V; C-tol. = 20 %
CATALOG NUMBER BFC2 336 6..... AND PACKAGING
REEL
(500 mm) (1)(2)
LOOSE IN BOX
DIMENSIONS
w x h x l
(mm)
C
(µF)
MASS
(g) (3)
Lt = 3.5 mm + 1mm/- 0.5 mm (10 mm)
or 3.5 mm 0.3 mm (= 15 mm)
H = 18.5 mm;
P0 = 12.7 mm
lt = 25.0 mm 2.0 mm
Last 5 digits of
Last 5 digits of
SPQ
Last 5 digits of
catalog number
SPQ
SPQ
catalog number
catalog number
Pitch = 10.0 mm 0.ꢀ mm; dt = 0.6 mm 0.06 mm
0.001
60102
66102
66152
66222
66332
66472
66682
63102
63152
63222
63332
63472
63682
0.0015
0.0022
0.0033
0.0047
0.0068
60152
60222
60332
60472
60682
4.0 x 10.0 x 12.5
0.6
1250
1000
1400
1100
1000
5.0 x 11.0 x 12.5
0.82
Pitch = 15.0 mm 0.ꢀ mm; dt = 0.6 mm 0.06 mm
0.0068
0.01
69005
69009
66103
66153
69006
63103
63153
5.0 x 11.0 x 17.5
6.0 x 12.0 x 17.5
1.0
1.4
1100
900
60103
60153
1000
1000
0.015
Pitch = 15.0 mm 0.ꢀ mm; dt = 0.8 mm 0.08 mm
0.022
0.033
0.047
7.0 x 13.5 x 17.5
8.5 x 15.0 x 17.5
10.0 x 16.5 x 17.5
1.8
2.4
3.0
60223
60333
60473
66223
66333
66473
63223
63333
63473
800
650
600
750
500
500
450
Note
SPQ = Standard packing quantity
•
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 365 mm is available on request
(3) Weight for short lead product only
Document Number: 28115
Revision: 22-Dec-10
For technical questions, contact: RFI@vishay.com
www.vishay.com
3
MKP336 6 Y2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
MKP 336 6 GENERAL DATA
URAC = 300 V; C-tol. = 10 %
CATALOG NUMBER BFC2 336 6..... AND PACKAGING
LOOSE IN BOX
REEL
(500 mm) (1)(2)
DIMENSIONS
w x h x l
(mm)
C
(µF)
MASS
(g) (1)
Lt = 3.5 mm + 1 mm/- 0.5 mm (10 mm)
lt = 25.0 mm 2.0 mm
H = 18.5 mm;
P0 = 12.7 mm
or 3.5 mm 0.3 mm (= 15 mm)
Last 5 digits of
catalog number
Last 5 digits of
catalog number
Last 5 digits of
catalog number
SPQ
SPQ
SPQ
Pitch = 10.0 mm 0.ꢀ mm; dt = 0.6 mm 0.06 mm
0.001
61102
61122
61152
61182
61222
61272
61332
61392
61472
61562
67102
67122
67152
67182
67222
67272
67332
67392
67472
67562
64102
64122
64152
64182
64222
64272
64332
64392
64472
64562
0.0012
0.0015
0.0018
4.0 x 10.0 x 12.5
0.6
1000
1000
1250
1000
1400
1100
0.0022
0.0027
0.0033
0.0039
0.0047
0.0056
5.0 x 11.0 x 12.5
1.1
Pitch = 15.0 mm 0.ꢀ mm; dt = 0.80 mm 0.08 mm
0.0056
0.0068
0.0082
0.01
69001
69007
67682
67822
67103
67123
67153
67183
69003
64682
64822
64103
64123
61153
64183
61682
61822
61103
61123
61153
61183
5.0 x 11.0 x 17.5
1.0
1000
1000
1000
1000
1100
900
0.012
0.015
0.018
6.0 x 12.0 x 17.5
1.4
Pitch = 15.0 mm 0.ꢀ mm; dt = 0.80 mm 0.08 mm
0.022
0.027
0.033
0.039
0.047
7.0 x 13.5 x 17.5
8.5 x 15.0 x 17.5
1.8
2.4
61223
61273
61333
61393
61473
67223
67273
67333
67393
67473
64223
64273
64333
61393
64473
800
650
750
500
500
450
10.0 x 16.5 x 17.5
3.0
600
Note
SPQ = Standard packing quantity
•
(1) H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”
(2) Reel diameter = 365 mm is available on request
(3) Weight for short lead product only
www.vishay.com
4
For technical questions, contact: RFI@vishay.com
Document Number: 28115
Revision: 22-Dec-10
MKP336 6 Y2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
SAFETY APPROVALS Y2
VOLTAGE
VALUE
FILE NUMBERS
300 VAC
EN 132400
1 nF to 47 nF
FI 2008059
UL1414 and CSA-C 22.2 No 1
antenna coupling
250 VAC
1 nF to 47 nF
E112471
300 VAC
300 VAC
UL1283
1 nF to 47 nF
1 nF to 47 nF
E109565
CB-Test-certificate
FI 5255 A2
The ENEC-approval together with the CB-Certificate replace all national marks of the following countries (they have already signed the
ENEC-Agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom.
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to Packaging Information: www.vishay.com/doc?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• The capacitors shall be mechanically fixed by the leads
Space Requirements on Printed Circuit Board
The maximum space for length (Imax.), width (wmax.) and heigth (hmax. ) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
• For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm; Δh = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
wmax. = W + Δ
Eccentricity
CBA116
Imax. = I + Δ
hmax. = h + Δ
Seating plane
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
• Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % 2 %.
For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28115
Revision: 22-Dec-10
For technical questions, contact: RFI@vishay.com
www.vishay.com
5
MKP336 6 Y2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
CHARACTERISTICS
Capacitance as afunction of ambient temperature (typical curve)
Tangent of loss angle as a function of frequency (typical curve)
103
4
2
0
typical
102
- 2
- 4
- 6
47 nF
≤
101
100
10 nF <
min.
101
102
103
104
105
- 50
0
50
Tamb (°C) 100
f (Hz)
Impedance as a function of frequency (typical curve)
Resonant frequency as a function of capacitance (typical curve)
102
103
1 nF
4.7 nF
10 nF
47 nF
101
100
Y2
101
10-1
10-2
100
C (nF)
104
106
107
108
1
f (Hz)
105
10
47
Max. RMS voltage as a function of frequency
Max. RMS current as a function of frequency
103
103
47 nF
102
101
100
10-1
10 nF
4.7 nF
1nF
Tamb ≤ 105 °C
Tamb ≤ 105 °C
101
101
103
104
105
f (Hz)
102
101
102
103
104
105
f (Hz)
www.vishay.com
6
For technical questions, contact: RFI@vishay.com
Document Number: 28115
Revision: 22-Dec-10
MKP336 6 Y2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
Insulation resistance as a function of ambient temperature (typical curve)
106
105
104
80
0
20
40
60
100
Tamb (°C)
APPLICATION NOTES
• For Y2 electromagnetic interference suppression between line and ground (50 Hz/60 Hz) with a maximum mains voltage of
300 VAC 10 % instability.
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information
depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
program must be used.
• The maximum ambient temperature must not exceed 105 °C.
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 VDC and
divided by the applied voltage.
Document Number: 28115
Revision: 22-Dec-10
For technical questions, contact: RFI@vishay.com
www.vishay.com
7
MKP336 6 Y2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
INSPECTION REQUIREMENTS
General Notes
1.Sub-clause numbers of tests and performance requirements refer to the “ Sectional Specification, IEC-publication EN 132400
(IEC 60384-14) and section one of this specification”.
2.In this table: D = destructive
ND = non destructive
Group C inspection requirements
D
OR
ND
SUB - CLAUSE NUMBER
AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
Group C inspection (periodic) see section “General notes” item 3
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
D
4.1 Dimensions (detail)
As specified in chapters “General data” of
this specification
Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.3 Robustness of terminations
4.4 Resistance to soldering heat
Tensile: load 10 N; 10 s
Bending: load 5 N; 4 x 90°
No visible damage
No pre-drying
Method: 1A
Solder bath: 260 °C
Duration: 10 s
4.19 Component solvent resistance
4.4.2 Final measurements
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min 0.5 min
Recovery time:
Min. 1 h, max. 2 h
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 5 % of the value measured
initially
Tangent of loss angle
Increase of tan δ:
≤ 0.008
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB - GROUP C1B PART OF SAMPLE
OF SUB - GROUP C1
D
Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
Isopropylalcohol at room temperature
Method: 1
4.20 Solvent resistance of the marking:
see Section “General notes”; item 5
No visible damage
Legible marking
Rubbing material: cotton wool
Immersion time: 5 min 0.5 min
θA = - 55 °C
θB = + 105 °C
5 cycles
4.6 Rapid change of temperature
4.6.1 Inspection
Duration t = 30 min
www.vishay.com
8
For technical questions, contact: RFI@vishay.com
Document Number: 28115
Revision: 22-Dec-10
MKP336 6 Y2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
D
OR
ND
SUB - CLAUSE NUMBER
AND TEST
CONDITIONS
Visual examination
PERFORMANCE REQUIREMENTS
4.7 Vibration (see note 3)
No visible damage
Mounting: see section “Mounting” of this
specification
Procedure B4
Frequency range: 10 Hz to 55 Hz.
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
4.7.2 Final inspection
4.9 Shock (see note 3)
Visual examination
No visible damage
No visible damage
Mounting: see section “Mounting” for
more information
Pulse shape: half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
4.9.2 Final measurements
Visual examination
Capacitance
|ΔC/C| ≤ 5 % of the value measured
initially
Tangent of loss angle
Increase of tan δ:
≤ 0.008
Compared to values measured initially
Insulation resistance
As specified in section “Insulation
Resistance” of this specification
SUB - GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF
SUB - GROUPS C1A AND C1B
D
4.11 Climatic sequence
4.11.1 Initial measurements
Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle:
Measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 105 °C
Duration: 16 h
4.11.3 Damp heat cyclic
Test Db
First cycle
4.11.4 Cold
Temperature: - 55 °C
Duration: 2 h
4.11.5 Damp heat cyclic
Test Db
remaining cycles
4.11.6 Final measurements
Visual examination
Capacitance
No visible damage
Legible marking
|ΔC/C| ≤ 5 % of the value measured in
4.11.1.
Tangent of loss angle
Increase of tan δ:
≤ 0.008
Compared to values measured in 4.11.1.
Voltage proof
No permanent breakdown or flash-over
2250 VDC; 1 min between term.
Insulation resistance
≥ 50 % of values specified in section
“Insulation resistance” of this specification
Document Number: 28115
Revision: 22-Dec-10
For technical questions, contact: RFI@vishay.com
www.vishay.com
9
MKP336 6 Y2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
D
OR
ND
SUB - CLAUSE NUMBER
AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB - GROUP C2
D
4.12 Damp heat steady state
56 days, 40 °C, 90 % to 95 % RH no load
capacitance
4.12.1 Initial measurements
4.12.3 Final measurements
Capacitance
Tangent of loss angle at 10 kHz
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 5 % of the value measured in
4.12.1.
Tangent of loss angle
Increase of tan δ:
≤ 0.007
Compared to values measured in 4.12.1.
Voltage proof
No permanent breakdown or flash-over
2250 VDC; 1 min between term.
Insulation resistance
≥ 50 % of values specified in section
“Insulation resistance” of this specification
SUB- GROUP C3
D
4.13.1 Initial measurements
Capacitance
Tangent of loss angle at 10 kHz
4.13 Impulse voltage
4.14 Endurance
3 successive impulses, full wave, peak
voltage:
No selfhealing breakdowns or flashover
5 kV
Max. 24 pulses
Duration: 1000 h
1.7 URAC at 105 °C
Once in every hour the voltage is
increased to 1000 VRMS for 0.1 s via
resistor of 47 Ω 5 %
4.14.7 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 10 % compared to values
measured in 4.13.1.
Tangent of loss angle
Increase of tan δ:
≤ 0.007
Compared to values measured in 4.13.1.
Voltage proof
No permanent breakdown or flash-over
2250 VDC
;
1 minute between terminations
Insulation resistance
≥ 50 % of values specified in section
“Insulation resistance” of this specification
www.vishay.com
10
For technical questions, contact: RFI@vishay.com
Document Number: 28115
Revision: 22-Dec-10
MKP336 6 Y2
Interference Suppression Film Capacitors
MKP Radial Potted Type
Vishay BCcomponents
D
OR
ND
SUB - CLAUSE NUMBER
AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB - GROUP C ꢀ
D
4.15 Charge and discharge
10 000 cycles
(50 c/s) charge to UR half sinewave
Duration: 5 ms
Discharge resistance:
420 VDC
--------------------------------------------------
R =
1.5 × C((dU) ⁄ (dt))
Rmin. = 2.2 Ω
4.15.1 Initial measurements
4.15.3 Final measurements
Capacitance
Tangent of loss angle at 10 kHz
Capacitance
|ΔC/C| ≤ 10 % compared to values
measured in 4.15.1.
Tangent of loss angle
Insulation resistance
Increase of tan δ:
≤ 0.008
Compared to values measured in 4.15.1.
≥ 50 % of values specified in section
“Insulation resistance” of this specification
SUB - GROUP C5
D
D
4.16 Radio frequency characteristic
Resonance frequency
As specified in section “Resonant
frequency” of this specification. 10 %
SUB - GROUP C6
4.17 Passive flammability
Class B
Bore of gas jet: Ø 0.5 mm
Fuel: butane
After removing test flame from capacitor,
the capacitor must not continue to burn for
more than 10 s. No burning particle must
drop from the sample.
Test duration for actual volume V in mm³:
V ≤ 250: 10 s
250 < V ≤ 500: 20 s
500 < V ≤ 1750: 30 s
V > 1750: 60 s
One flame application
12 mm
~ 8 mm
45.0°
SUB - GROUP C7
D
4.18 Active flammability
20 x 5 kV discharges on the test capacitor
connected to UR
The cheese cloth around the capacitors
shall not burn with a flame.
No electrical measurements are required.
Document Number: 28115
Revision: 22-Dec-10
For technical questions, contact: RFI@vishay.com
www.vishay.com
11
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00229/img/page/BFC233661332_1345032_files/BFC233661332_1345032_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00229/img/page/BFC233661332_1345032_files/BFC233661332_1345032_2.jpg)
BFC233667103
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.01 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00229/img/page/BFC233661332_1345032_files/BFC233661332_1345032_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00229/img/page/BFC233661332_1345032_files/BFC233661332_1345032_2.jpg)
BFC233667153
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.015 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00229/img/page/BFC233661332_1345032_files/BFC233661332_1345032_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00229/img/page/BFC233661332_1345032_files/BFC233661332_1345032_2.jpg)
BFC233667223
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.022 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00229/img/page/BFC233661332_1345032_files/BFC233661332_1345032_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00229/img/page/BFC233661332_1345032_files/BFC233661332_1345032_2.jpg)
BFC233667333
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.033 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/BFC233661273_1504236_files/BFC233661273_1504236_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/BFC233661273_1504236_files/BFC233661273_1504236_2.jpg)
BFC233667562
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.0056 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
![](http://pdffile.icpdf.com/pdf2/p00229/img/page/BFC233661332_1345032_files/BFC233661332_1345032_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00229/img/page/BFC233661332_1345032_files/BFC233661332_1345032_2.jpg)
BFC233667682
CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 1000 V, 0.0068 uF, THROUGH HOLE MOUNT, RADIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明