BAQ133_05 [VISHAY]
Small Signal Switching Diodes, Low Leakage Current; 小信号开关二极管，低漏电流
| 型号： | BAQ133_05 |
| 厂家： | 
VISHAY |
| 描述： | Small Signal Switching Diodes, Low Leakage Current |
| 文件： | 总5页 (文件大小：130K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BAQ133 / 134 / 135
Vishay Semiconductors
Small Signal Switching Diodes, Low Leakage Current
Features
• Silicon Planar Diodes
• Very low reverse current
• Lead (Pb)-free component
e2
• Component in accordance to RoHS
2002/95/EC and WEEE 2002/96/EC
9612009
Applications
Protection circuits, time delay circuits, peak follower
circuits, logarithmic amplifiers
Mechanical Data
Case: QuadroMELF Glass case (SOD-80)
Weight: approx. 34 mg
Cathode Band Color: Black
Packaging Codes/Options:
GS18 / 10 k per 13" reel (8 mm tape), 10 k/box
GS08 / 2.5 k per 7" reel (8 mm tape), 12.5 k/box
Parts Table
Part
Type differentiation
VRRM = 40 V
Ordering code
Remarks
Tape and Reel
BAQ133
BAQ134
BAQ135
BAQ133-GS18 or BAQ133-GS08
V
V
RRM = 70 V
BAQ134-GS18 or BAQ134-GS08
BAQ135-GS18 or BAQ135-GS08
Tape and Reel
Tape and Reel
RRM = 140 V
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Parameter
Test condition
Part
Symbol
VR
Value
Unit
V
Reverse voltage
BAQ133
30
60
BAQ134
BAQ135
VR
VR
V
V
125
2
Peak forward surge current
Forward current
tp = 1 µs
IFSM
IF
A
200
mA
Thermal Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter
Test condition
on PC board
50 mm x 50 mm x 1.6 mm
Symbol
Value
500
Unit
K/W
Thermal resistance junction to ambient air
RthJA
Junction temperature
Tj
175
°C
°C
Storage temperature range
Tstg
- 65 to + 175
Document Number 85536
Rev. 1.7, 09-Dec-05
www.vishay.com
1
BAQ133 / 134 / 135
Vishay Semiconductors
Electrical Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter
Forward voltage
Test condition
Part
Symbol
VF
Min
Typ.
1
Max
1
Unit
V
IF = 100 mA
Reverse current
E ≤ 300 lx, rated VR
E ≤ 300 lx, rated VR, Tj = 125 °C
E ≤ 300 lx, VR = 15 V
E ≤ 300 lx, VR = 30 V
E ≤ 300 lx, VR = 60 V
IR
IR
3
0.5
1
nA
μA
nA
nA
nA
V
BAQ133
BAQ134
BAQ135
IR
0.5
0.5
0.5
IR
1
IR
1
Breakdown voltage
Diode capacitance
I
R = 5 μA, tp/T = 0.01, tp = 0.3 ms BAQ133
V(BR)
V(BR)
V(BR)
CD
40
70
BAQ134
BAQ135
V
140
V
V
R = 0, f = 1 MHz
3
pF
Typical Characteristics (Tamb = 25 °C unless otherwise specified)
10000
V
= V
RRM
R
1000
100
Scattering Limit
10
1
0
40
80
120
160
200
T - Junction Temperature (°C)
j
94 9079
Figure 1. Reverse Current vs. Junction Temperature
1000
T = 25 °C
j
100
10
Scattering Limit
1
0.1
0
0.4
0.8
1.2
1.6
2.0
V
F
- Forward Voltage (V)
94 9078
Figure 2. Forward Current vs. Forward Voltage
www.vishay.com
Document Number 85536
Rev. 1.7, 09-Dec-05
2
BAQ133 / 134 / 135
Vishay Semiconductors
Package Dimensions in mm (Inches)
Cathode indification
Glass
0.47 max. (0.02)
> R 3.0 (R 0.117)
3.7 (0.144)
3.3 (0.129)
ISO Method E
Mounting Pad Layout
2.50 (0.098) max
1.25 (0.049) min
96 12071
5 (0.197) ref
Document Number 85536
Rev. 1.7, 09-Dec-05
www.vishay.com
3
BAQ133 / 134 / 135
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating
systems with respect to their impact on the health and safety of our employees and the public, as well as
their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use
of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
www.vishay.com
4
Document Number 85536
Rev. 1.7, 09-Dec-05
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
©2020 ICPDF网 联系我们和版权申明