BAQ134-GS18 [VISHAY]
SWITCHING DIODE GENPURP QUADROMELF-E2 - Tape and Reel;型号: | BAQ134-GS18 |
厂家: | VISHAY |
描述: | SWITCHING DIODE GENPURP QUADROMELF-E2 - Tape and Reel 开关 二极管 |
文件: | 总4页 (文件大小:103K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BAQ133, BAQ134, BAQ135
www.vishay.com
Vishay Semiconductors
Small Signal Switching Diodes, Low Leakage Current
FEATURES
• Silicon planar diodes
• Very low reverse current
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Protection circuits, time delay circuits, peak follower
circuits, logarithmic amplifiers
DESIGN SUPPORT TOOLS click logo to get started
Models
Available
MECHANICAL DATA
Case: QuadroMELF (SOD-80)
Weight: approx. 34 mg
Cathode band color: black
Packaging codes / options:
GS18/10K per 13" reel (8 mm tape), 10K/box
GS08/2.5K per 7" reel (8 mm tape), 12.5K/box
PARTS TABLE
TYPE
DIFFERENTIATION
TYPE
MARKING
CIRCUIT
CONFIGURATION
PART
ORDERING CODE
REMARKS
BAQ133
BAQ134
BAQ135
V
V
RRM = 40 V
RRM = 70 V
BAQ133-GS18 or BAQ133-GS08
BAQ134-GS18 or BAQ134-GS08
BAQ135-GS18 or BAQ135-GS08
-
-
-
Single
Single
Single
Tape and reel
Tape and reel
Tape and reel
V
RRM = 140 V
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
VRRM
VRRM
VRRM
VR
VALUE
40
UNIT
V
BAQ133
BAQ134
BAQ135
BAQ133
BAQ134
BAQ135
Repetitive peak reverse voltage
70
V
140
30
V
V
Reverse voltage
VR
60
V
VR
125
2
V
Peak forward surge current
Forward continuous current
tp = 1 μs
IFSM
IF
A
200
mA
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
On PC board
50 mm x 50 mm x 1.6 mm
Thermal resistance junction to ambient air
RthJA
500
K/W
Junction temperature
Tj
175
°C
°C
Storage temperature range
Tstg
-65 to +175
Rev. 1.9, 11-Jul-17
Document Number: 85536
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAQ133, BAQ134, BAQ135
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
V
Forward voltage
IF = 100 mA
VF
IR
1
3
E ≤ 300 Ix, rated VR
1
nA
μA
nA
nA
nA
V
E ≤ 300 Ix, rated VR, Tj = 125 °C
E ≤ 300 Ix, VR = 15 V
E ≤ 300 Ix, VR = 30 V
E ≤ 300 Ix, VR = 60 V
IR
0.5
1
Reverse current
BAQ133
BAQ134
BAQ135
BAQ133
BAQ134
BAQ135
IR
0.5
0.5
0.5
IR
1
IR
1
V(BR)
V(BR)
V(BR)
CD
40
70
I
R = 5 μA, tp/T = 0.01,
tp = 0.3 ms
Breakdown voltage
Diode capacitance
V
140
V
V
R = 0, f = 1 MHz
3
pF
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
10 000
V
= V
RRM
R
1000
100
Scattering Limit
10
1
0
40
80
120
160
200
T - Junction Temperature (°C)
j
94 9079
Fig. 1 - Reverse Current vs. Junction Temperature
1000
T = 25 °C
j
100
10
Scattering Limit
1
0.1
0
0.4
0.8
1.2
1.6
2.0
V
F
- Forward Voltage (V)
94 9078
Fig. 2 - Forward Current vs. Forward Voltage
Rev. 1.9, 11-Jul-17
Document Number: 85536
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAQ133, BAQ134, BAQ135
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters (inches): QuadroMELF (SOD-80)
Cathode identification
> R3 (R0.118)
glass
0.47 (0.019) max.
3.7 (0.146)
3.3 (0.130)
The gap between plug and glass can
be either on cathode or anode side
Foot print recommendation:
1.25 (0.049) min.
2.5 (0.098) max.
5 (0.197) ref.
96 12071
Rev. 1.9, 11-Jul-17
Document Number: 85536
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明