BA783S-GS18 [VISHAY]

Rectifier Diode, 1 Element,;
BA783S-GS18
型号: BA783S-GS18
厂家: VISHAY    VISHAY
描述:

Rectifier Diode, 1 Element,

二极管
文件: 总5页 (文件大小:248K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
BA782S / BA783S  
Vishay Semiconductors  
Band Switching Diodes  
Features  
• Silicon Epitaxial Planar Diode Switches  
• For electric bandswitching in radio and  
TV tuners in the frequency range of  
(50 to 1000) MHz. The dynamic forward  
e3  
resistance is constant and very small over a wide  
range of frequency and forward current. The  
reverse capacitance is also small and largely inde-  
pendent of the reverse voltage.  
20145  
• These diodes are also available in SOD123 case  
with the type designations BA782 and BA783.  
• Lead (Pb)-free component  
• Component in accordance to RoHS 2002/95/EC  
and WEEE 2002/96/EC  
Mechanical Data  
Case: SOD323 Plastic case  
Weight: approx. 5.0 mg  
Packaging Codes/Options:  
GS18/10 k per 13" reel (8 mm tape), 10 k/box  
GS08/3 k per 7" reel (8 mm tape), 15 k/box  
Parts Table  
Part  
Ordering code  
BA782S-GS18 or BA782S-GS08  
BA783S-GS18 or BA783S-GS08  
Type Marking  
Remarks  
BA782S  
BA783S  
R2  
R3  
Tape and Reel  
Tape and Reel  
Absolute Maximum Ratings  
Tamb = 25 °C, unless otherwise specified  
Parameter  
Reverse voltage  
Forward continuous current  
Test condition  
Symbol  
VR  
Value  
Unit  
V
35  
T
amb = 25 °C  
IF  
100  
mA  
Thermal Characteristics  
Tamb = 25 °C, unless otherwise specified  
Parameter  
Test condition  
Symbol  
Tj  
Value  
125  
Unit  
°C  
Junction temperature  
Storage temperature range  
Tstg  
- 55 to + 125  
°C  
Document Number 85709  
Rev. 1.5, 17-May-06  
www.vishay.com  
1
BA782S / BA783S  
Vishay Semiconductors  
Electrical Characteristics  
Tamb = 25 °C, unless otherwise specified  
Parameter  
Forward voltage  
Test condition  
IF = 100 mA  
R = 20 V  
Part  
Symbol  
VF  
Min  
Typ.  
Max  
Unit  
mV  
1000  
Leakage current  
V
IR  
rf  
50  
0.7  
1.2  
0.5  
0.9  
1.5  
1.25  
1.2  
nA  
Ω
Dynamik forward resistance  
f = (50 to 1000) MHz, IF = 3 mA BA782S  
BA783S  
f = (50 to 1000) MHz, IF = 10 mA BA782S  
BA783S  
rf  
Ω
rf  
Ω
rf  
Ω
Diode capacitance  
V
V
R = 1 V, f = 1 MHz  
R = 3 V, f = 1 MHz  
CD  
CD  
CD  
LS  
pF  
pF  
pF  
nH  
BA782S  
BA783S  
Series inductance across case  
2.5  
Typical Characteristics  
Tamb = 25 °C, unless otherwise specified  
2.0  
1.8  
T = 25 °C  
j
f = 1 MHz  
1.6  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0
0.1  
1
10  
100  
18798  
V
R
- Reverse Voltage (V)  
Figure 1. Diode Capacitance  
10  
T
= 25 °C  
amb  
BA782, BA783  
1 kHz  
BA783  
100 MHz  
1
BA782  
100 MHz  
0.1  
1
10  
100  
18799  
I - Forward Current (mA)  
F
Figure 2. Dynamic Forward Resistance vs. Forward Current  
www.vishay.com  
2
Document Number 85709  
Rev. 1.5, 17-May-06  
BA782S / BA783S  
Vishay Semiconductors  
Package Dimensions in mm (Inches): SOD323  
0.25 (0.010) min  
1.95 (0.077)  
1.60 (0.063)  
foot print recommendation:  
0.6 (0.024)  
0.6 (0.024)  
cathode bar  
1.6 (0.063)  
2.85 (0.112)  
2.50 (0.098)  
Document no.: S8-V-3910.02-001 (4)  
Rev. 03 - Date: 08.November 2004  
17443  
Document Number 85709  
Rev. 1.5, 17-May-06  
www.vishay.com  
3
BA782S / BA783S  
Vishay Semiconductors  
Ozone Depleting Substances Policy Statement  
It is the policy of Vishay Semiconductor GmbH to  
1. Meet all present and future national and international statutory requirements.  
2. Regularly and continuously improve the performance of our products, processes, distribution and operating  
systems with respect to their impact on the health and safety of our employees and the public, as well as  
their impact on the environment.  
It is particular concern to control or eliminate releases of those substances into the atmosphere which are  
known as ozone depleting substances (ODSs).  
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs  
and forbid their use within the next ten years. Various national and international initiatives are pressing for an  
earlier ban on these substances.  
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use  
of ODSs listed in the following documents.  
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments  
respectively  
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental  
Protection Agency (EPA) in the USA  
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.  
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting  
substances and do not contain such substances.  
We reserve the right to make changes to improve technical design  
and may do so without further notice.  
Parameters can vary in different applications. All operating parameters must be validated for each  
customer application by the customer. Should the buyer use Vishay Semiconductors products for any  
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all  
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal  
damage, injury or death associated with such unintended or unauthorized use.  
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany  
www.vishay.com  
4
Document Number 85709  
Rev. 1.5, 17-May-06  
Legal Disclaimer Notice  
Vishay  
Notice  
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,  
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.  
Information contained herein is intended to provide a product description only. No license, express or implied, by  
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's  
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express  
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness  
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.  
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.  
Customers using or selling these products for use in such applications do so at their own risk and agree to fully  
indemnify Vishay for any damages resulting from such improper use or sale.  
Document Number: 91000  
Revision: 08-Apr-05  
www.vishay.com  
1

相关型号:

BA783S-HE3-08

Mixer Diode, Ultra High Frequency, Silicon, ROHS COMPLIANT PACKAGE-2
VISHAY

BA783S-HE3-18

Mixer Diode, Ultra High Frequency, Silicon, ROHS COMPLIANT PACKAGE-2
VISHAY

BA783S-HG3-08

Mixer Diode, Very High Frequency to Ultra High Frequency, Silicon, GREEN PACKAGE-2
VISHAY

BA783S-HG3-18

Mixer Diode, Very High Frequency to Ultra High Frequency, Silicon, GREEN PACKAGE-2
VISHAY

BA783S-V

Band Switching Diodes
VISHAY

BA783S/D3

Mixer Diode, Very High Frequency to Ultra High Frequency, Silicon
VISHAY

BA783S/D4

Mixer Diode, Very High Frequency to Ultra High Frequency, Silicon
VISHAY

BA783S/D6

Mixer Diode, Very High Frequency to Ultra High Frequency, Silicon
VISHAY

BA78M05

1A Output 78 series Regulators 500mA Output 78 series Regulators
ROHM

BA78M05CP

Three-Terminal Regulator
ROHM

BA78M05CP-E1

Regulator, 1 Output, BIPolar,
ROHM

BA78M05CP-E2

Fixed Positive Standard Regulator, 5VBIPolar, ROHS COMPLIANT, TO-220, 3 PIN
ROHM