3KASMC18AHE3_B/H [VISHAY]
Trans Voltage Suppressor Diode, 3000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, SMC, 2 PIN;型号: | 3KASMC18AHE3_B/H |
厂家: | VISHAY |
描述: | Trans Voltage Suppressor Diode, 3000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, SMC, 2 PIN 局域网 光电二极管 |
文件: | 总5页 (文件大小:96K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3KASMC10A thru 3KASMC43A
www.vishay.com
Vishay General Semiconductor
Surface Mount PAR® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
FEATURES
• Junction passivation optimized design
passivated anisotropic rectifier technology
• TJ = 185 °C capability suitable for high
reliability and automotive requirement
Available
• Available in uni-directional polarity only
• 3000 W peak pulse power capability with a 10/1000 μs
waveform
• Excellent clamping capability
• Very fast response time
SMC (DO-214AB)
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHE3 or P/NHM3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
TYPICAL APPLICATIONS
VWM
10 V to 43 V
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
VBR
11.1 V to 52.8 V
3000 W
PPPM
PD
6.0 W
IFSM
200 A
MECHANICAL DATA
TJ max.
Polarity
Package
185 °C
Case: SMC (DO-214AB)
Uni-directional
SMC (DO-214AB)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant and
AEC-Q101 qualified
(“X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 and HM3 suffix meet JESD 201 class 2 whisker test
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
IPPM
VALUE
3000
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 3)
Peak power pulse current with a 10/1000 μs waveform (1) (fig. 1)
Peak forward surge current 8.3 ms single half sine-wave (2)
Power dissipation on infinite heatsink, TL = 75 °C (fig. 6)
Maximum instantaneous forward voltage at 100 A (2)
Operating junction and storage temperature range
See next table
200
A
IFSM
A
PD
6.0
W
VF
3.5
V
TJ, TSTG
-65 to +185
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2.
Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum
(2)
Revision: 17-Aug-17
Document Number: 88480
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
3KASMC10A thru 3KASMC43A
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM
REVERSE
LEAKAGE
AT VWM
MAXIMUM
MAXIMUM
MAXIMUM
VOLTAGE
TEST
STAND-OFF
DEVICE
MARKING
CODE
REVERSE
LEAKAGE
AT VWM
PEAK PULSE CLAMPING
(1)
DEVICE TYPE
V
BR AT IT
(V)
CURRENT VOLTAGE
SURGE
VOLTAGEAT
IPPM
IT
(mA)
VWM
(V)
CURRENT
ID (μA)
IR (μA)
I
PPM (A) (2)
VC (V)
MIN.
MAX.
TJ = 150 °C
3KASMC10A
3KASMC11A
3KASMC12A
3KASMC13A
3KASMC14A
3KASMC15A
3KASMC16A
3KASMC17A
3KASMC18A
3KASMC20A
3KASMC22A
3KASMC24A
3KASMC26A
3KASMC28A
3KASMC30A
3KASMC33A
3KASMC36A
3KASMC40A
3KASMC43A
3AX
3AZ
3BE
3BG
3BK
3BM
3BP
3BR
3BT
3BV
3BX
3BZ
3CE
3CG
3CK
3CM
3CP
3CR
3CT
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
52.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
5.0
5.0
2.0
2.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
50
50
20
20
10
10
10
10
10
10
10
10
10
10
15
15
20
20
20
177
165
151
140
129
123
115
109
103
92.6
84.5
77.1
71.3
66.1
62.0
56.3
51.6
46.5
43.2
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
Notes
(1)
(2)
(3)
Pulse test: tp 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
All terms and symbols are consistent with ANSI/IEEE C62.35
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VALUE
77.5
UNIT
Typical thermal resistance, junction to ambient air (1)
RJA
°C/ W
Typical thermal resistance, junction to leads
RJL
18.3
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
3KASMC10AHE3_B/H (1)
3KASMC10AHE3_B/I (1)
3KASMC10AHM3_B/H (1)
3KASMC10AHM3_B/I (1)
0.211
0.211
0.211
0.211
H
I
850
3500
850
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
H
I
3500
Note
(1)
AEC-Q101 qualified
Revision: 17-Aug-17
Document Number: 88480
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
3KASMC10A thru 3KASMC43A
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
10 000
Measured at
Zero Bias
10
1000
Measured at
Stand-Off Voltage
1
TJ = 25 °C
f = 1.0 MHz
V
sig = 50 mVp-p
0.1
0.1
100
1
10
100
1000
10 000
10
20
30
40
50
VWM - Reverse Stand-off Voltage (V)
td - Pulse Width (µs)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance
200
100
75
TJ = TJ max.
8.3 ms Single Half Sine-Wave
100
50
50
25
10
0
1
5
10
50
100
50
TJ - Initial Temperature (°C)
0
100
150
200
Number of Cycles at 60 Hz
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 5 - Maximum Non-Repetitive/Peak Forward Surge Current
150
6
TJ = 25 °C
Pulse Width (td)
60 Hz
tr = 10 µs
Resistive or
Inductive Load
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
5
Peak Value
IPPM
100
50
0
4
3
2
1
0
Half Value -
IPPM
IPP
2
10/1000 µs Waveform
as defined by R.E.A.
td
75
150
175
1.0
3.0
4.0
25
50
100 125
0
2.0
200
0
t - Time (ms)
TL - Lead Temperature (°C)
Fig. 3 - Pulse Waveform
Fig. 6 - Power Derating Curve
Revision: 17-Aug-17
Document Number: 88480
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
3KASMC10A thru 3KASMC43A
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMC (DO-214AB)
Cathode Band
Mounting Pad Layout
0.185 (4.69) MAX.
0.246 (6.22)
0.220 (5.59)
0.126 (3.20)
0.114 (2.90)
0.126 (3.20) MIN.
0.280 (7.11)
0.260 (6.60)
0.060 (1.52) MIN.
0.320 (8.13) REF.
0.012 (0.305)
0.006 (0.152)
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.008 (0.2)
0 (0)
0.320 (8.13)
0.305 (7.75)
Revision: 17-Aug-17
Document Number: 88480
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
3KASMC18AHE3_B/I
Trans Voltage Suppressor Diode, 3000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, SMC, 2 PIN
VISHAY
3KASMC18AHM3/57T
Trans Voltage Suppressor Diode, 3000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, SMCJ, 2 PIN
VISHAY
3KASMC18AHM3_B/H
Trans Voltage Suppressor Diode, 3000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, SMC, 2 PIN
VISHAY
3KASMC18AHM3_B/I
Trans Voltage Suppressor Diode, 3000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, SMC, 2 PIN
VISHAY
3KASMC18E3/57T
DIODE 3000 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN, Transient Suppressor
VISHAY
3KASMC18E3/9AT
DIODE 3000 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN, Transient Suppressor
VISHAY
3KASMC18HE3/57T
Trans Voltage Suppressor Diode, 3000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN
VISHAY
3KASMC18HE3_A/H
Trans Voltage Suppressor Diode, 3000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN
VISHAY
3KASMC20-HE3/9AT
Trans Voltage Suppressor Diode, 3000W, 20V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN
VISHAY
3KASMC20A-HE3/9AT
Trans Voltage Suppressor Diode, 3000W, 20V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB, ROHS COMPLIANT, PLASTIC, SMC, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明