首页 |元器件品牌

135D365X0125C2 [VISHAY]

Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation; 湿钽电容器钽外壳与玻璃 - 钽密封为 - 55 ΣC至+ 200 ΣC操作
135D365X0125C2
型号： 135D365X0125C2
厂家： VISHAY    VISHAY
描述：

Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
湿钽电容器钽外壳与玻璃 - 钽密封为 - 55 ΣC至+ 200 ΣC操作

电容器 钽电容器 固定电容器
文件： 总6页 (文件大小：100K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
135D  
Vishay  
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum  
Hermetic Seal for - 55 °C to + 200 °C Operation  
FEATURES  
• Terminations: standard tin/lead (SnPb),  
100 % Tin (RoHS compliant) available  
Pb-free  
Available  
• Standard and extended ratings  
RoHS*  
electrolytic  
• Model  
135D  
tantalum-case  
COMPLIANT  
capacitors incorporate the advantages of all the  
varieties of electrolytic capacitors and eliminate most of the  
disadvantages. These units have a 3 volt reverse voltage  
capability at + 85 °C and a higher ripple current capability  
than any other electrolytic type with similar combinations of  
capacitance and case size.  
• Designed for the aerospace applications, this capacitor  
was developed under partial sponsorship of the Marshall  
Space Flight Center, National Aeronautics and Space  
Administration. The capacitors have a high resistance to  
damage from shock and vibration. Extended range ratings  
and high temperature designs areavailable.  
• Model 135D capacitors are commercial equivalents of  
Tansitor Style; AQ, AR, HAQ, HAR, Mallory-NACC Style;  
TLT, TXT, THT, THX and Military Style CLR79 and CLR81,  
designed to meet the performance requirements of Military  
Specification MIL-PRF-39006/22/25. Capacitors to meet  
MILPRF- 39006/22/25 should be ordered by part numbers  
shown in that specification.  
PERFORMANCE CHARACTERISTICS  
Operating Temperature: - 55 °C to + 85 °C.  
(To + 200 °C with voltage derating.)  
Life Test: Capacitors are capable of withstanding a 2000 h  
life test at a temperature of + 85 °C or + 125 °C at the  
applicable rated DC working voltage.  
Capacitance Tolerance: At 120 Hz, + 25 °C.  
standard. 10 %, 5 % available as special.  
20 %  
Following life test:  
1. DCL, measured at + 85 °C rated voltage, shall not be in  
excess of the original requirement.  
DC Leakage Current (DCL Max.): At + 25 °C and above:  
Leakage current shall not exceed the values listed in the  
Standard Ratings Tables.  
2. The equivalent series resistance shall not exceed 150 %  
of the initial requirement.  
3. Change in capacitance shall not exceed 10 % from the  
initial measurement.  
ORDERING INFORMATION  
135D  
306  
X0  
006  
C
2
E3  
MODEL  
CAPACITANCE  
CAPACITANCE  
TOLERANCE  
DC VOLTAGE RATING CASE CODE  
STYLE NUMBER  
RoHS COMPLIANT  
AT + 85 °C  
This is expressed  
in picofarads. The  
first two digits are  
the significant  
figures. The third  
is the number of  
zeros to follow  
X0 = 20 %  
X9 = 10 %  
X5 = 5 %  
This is expressed in volts. See Ratings  
Standard  
0 = No outer tube.  
2 = Outer polyesterfilm  
insulation.  
E3 = 100 % tin  
termination (RoHS  
compliant design)  
Blank = SnPb  
To complete the  
three-digit block, zeros  
precede the voltage  
rating. A decimal point is  
indicated by an “R”  
(6R3 = 6.3 V)  
and  
Case Codes  
Table  
termination  
High Temperature  
8 = No outer tube.  
6 = High temperature film  
insulation (above + 125 °C)  
(standard design)  
Note  
Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to  
the unit weight.  
* Pb containing terminations are not RoHS compliant, exemptions may apply  
www.vishay.com  
42  
For technical questions, contact: tantalum@vishay.com  
Document Number: 40024  
Revision: 10-Oct-08  
135D  
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum  
Hermetic Seal for - 55 °C to + 200 °C Operation  
Vishay  
DIMENSIONS in inches [millimeters]  
D
E
L1  
E
0.0253 0.002 ꢀ0.6ꢁ 0.05ꢂ DIA.  
(NO. 22 AWG TINNED NICKEL LEADS)  
SOLDERABLE AND WELDABLE  
WELD  
TANTALUM  
L2  
CASE CODE  
WEIGHT  
(g)  
L2  
D
L1  
E
TYPE DCLR 79/81  
(Max.)  
(Max.)  
135D  
EQUIV.  
0.188 0.016  
[4.78 0.41]  
0.281 0.016  
[7.14 0.41]  
0.375 0.016  
[9.53 0.41]  
0.375 0.016  
[9.53 0.41]  
0.453 + 0.031 - 0.016  
[11.51 + 0.79 - 0.41]  
0.641 + 0.031 - 0.016  
[16.28 + 0.79 - 0.41]  
0.766 + 0.031 - 0.016  
[19.46 + 0.79 - 0.41]  
1.062 + 0.031 - 0.016  
[26.97 + 0.79 - 0.41]  
0.734  
[18.64]  
0.922  
[23.42]  
1.047  
[26.59]  
1.343  
[34.11]  
1.500 0.250  
[38.10 6.35]  
2.250 0.250  
[57.15 6.35]  
2.250 0.250  
[57.15 6.35]  
2.250 0.250  
[57.15 6.35]  
C
T1  
2.6  
6.2  
F
T
K
T2  
T3  
T4  
11.6  
17.7  
Note  
*For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body.  
STANDARD RATINGS  
MAX. ESR MAX. IMP.  
MAX. DCL (µA)  
at  
MAX. CAPACITANCE CHANGE  
(%) at  
MAX.  
RIPPLE  
ꢁ0 kHz  
Irms  
at  
at  
CAPACITANCE CASE  
PART NUMBER*  
+ 25 °C  
120 Hz  
- 55 °C  
120 Hz  
(µF)  
CODE  
+ 85 °C  
+ 25 °C  
- 55 °C  
+ 85 °C + 125 °C  
+ 125 °C  
6 WVDC at + 85 °C . . . ꢁ WVDC at + 125 °C. . . 3.6 WVDC at + 200 °C  
30  
68  
C
C
F
F
T
T
K
135D306X0006C2  
135D686X0006C2  
135D147X0006F2  
135D277X0006F2  
135D337X0006T2  
135D567X0006T2  
135D128X0006K2  
4.0  
3.2  
2.0  
2.2  
1.4  
1.3  
1.0  
100  
60  
40  
25  
20  
25  
20  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
3.0  
2.0  
2.0  
3.0  
6.5  
7.9  
- 40  
- 40  
- 40  
- 44  
- 44  
- 64  
- 80  
+ 10.5  
+ 14  
+ 14  
+ 17.5  
+ 14  
+ 17.5  
+ 25  
+ 12  
+ 16  
+ 16  
+ 20  
+ 16  
+ 20  
+ 25  
820  
960  
140  
270  
330  
560  
1200  
1200  
1375  
1800  
1900  
2265  
13.0  
14.0  
8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C . . . ꢁ.8 WVDC at + 200 °C  
25  
56  
C
C
F
F
T
T
K
135D256X0008C2  
135D566X0008C2  
135D127X0008F2  
135D227X0008F2  
135D297X0008T2  
135D437X0008T2  
135D857X0008K2  
4.0  
3.3  
2.6  
2.4  
1.8  
1.4  
1.0  
100  
59  
50  
30  
25  
25  
22  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
4.0  
2.0  
2.0  
2.0  
7.0  
6.0  
- 40  
- 40  
- 44  
- 44  
- 64  
- 64  
- 80  
+ 10.5  
+ 14  
+ 12  
+ 16  
+ 20  
+ 20  
+ 20  
+ 20  
+ 25  
820  
900  
120  
220  
290  
430  
850  
+ 17.5  
+ 17.5  
+ 17.5  
+ 17.5  
+ 25  
1230  
1370  
1770  
1825  
2330  
14.0  
16.0  
10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C . . . 6 WVDC at + 200 °C  
20  
47  
C
C
F
F
T
T
K
135D206X0010C2  
135D476X0010C2  
135D107X0010F2  
135D187X0010F2  
135D257X0010T2  
135D397X0010T2  
135D757X0010K2  
4.0  
3.7  
2.4  
2.2  
1.8  
1.5  
1.0  
120  
90  
60  
40  
30  
25  
23  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
4.0  
2.0  
2.0  
4.0  
- 32  
- 36  
- 36  
- 36  
- 40  
- 64  
- 80  
+ 10.5  
+ 14  
+ 14  
+ 14  
+ 14  
+ 12  
+ 16  
+ 16  
+ 16  
+ 16  
+ 20  
+ 25  
820  
855  
100  
180  
250  
390  
750  
1200  
1365  
1720  
1800  
2360  
7.0  
10.0  
16.0  
16.0  
+ 17.5  
+ 25  
15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C . . . 9 WVDC at + 200 °C  
15  
33  
70  
120  
170  
270  
540  
C
C
F
F
T
T
K
135D156X0015C2  
135D336X0015C2  
135D706X0015F2  
135D127X0015F2  
135D177X0015T2  
135D277X0015T2  
135D547X0015K2  
4.4  
4.0  
2.8  
2.6  
2.4  
2.2  
1.0  
155  
90  
75  
50  
35  
30  
23  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
6.0  
2.0  
2.0  
4.0  
- 24  
- 28  
- 28  
- 28  
- 32  
- 56  
- 80  
+ 10.5  
+ 14  
+ 14  
+ 17.5  
+ 14  
+ 17.5  
+ 25  
+ 12  
+ 16  
+ 16  
+ 20  
+ 16  
+ 20  
+ 25  
780  
820  
1150  
1450  
1480  
1740  
2330  
7.0  
10.0  
16.0  
24.0  
Note  
* Part Numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit  
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film  
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit  
in the part number from “2” to “6”. For RoHS compliant add “E3”.  
Document Number: 40024  
Revision: 10-Oct-08  
For technical questions, contact: tantalum@vishay.com  
www.vishay.com  
43  
135D  
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum  
Hermetic Seal for - 55 °C to + 200 °C Operation  
Vishay  
STANDARD RATINGS  
MAX. ESR MAX. IMP.  
MAX. DCL (µA)  
at  
MAX. CAPACITANCE CHANGE  
(%) at  
MAX.  
RIPPLE  
ꢁ0 kHz  
rms  
at  
at  
CAPACITANCE CASE  
PART NUMBER*  
+ 25 °C  
120 Hz  
- 55 °C  
120 Hz  
(µF)  
CODE  
+ 85 °C  
+ 25 °C  
- 55 °C  
+ 85 °C + 125 °C  
+ 125 °C  
25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C . . . 12 WVDC at + 200 °C  
10  
22  
50  
100  
120  
180  
350  
C
C
F
F
T
T
K
135D106X0025C2  
135D226X0025C2  
135D506X0025F2  
135D107X0025F2  
135D127X0025T2  
135D187X0025T2  
135D357X0025K2  
5.3  
4.2  
3.0  
2.8  
2.6  
2.2  
1.3  
220  
140  
70  
50  
38  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
7.0  
2.0  
2.0  
2.0  
10.0  
6.0  
18.0  
28.0  
- 16  
- 20  
- 28  
- 28  
- 32  
- 48  
- 70  
+ 8  
+ 10.5  
+ 13  
+ 13  
+ 13  
+ 13  
+ 25  
+ 9  
715  
800  
+ 12  
+ 15  
+ 15  
+ 15  
+ 15  
+ 25  
1130  
1435  
1450  
1525  
1970  
32  
24  
30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C . . . 18 WVDC at + 200 °C  
8
15  
40  
68  
100  
150  
300  
C
C
F
F
T
T
K
135D805X0030C2  
135D156X0030C2  
135D406X0030F2  
135D686X0030F2  
135D107X0030T2  
135D157X0030T2  
135D307X0030K2  
6.6  
6.2  
4.0  
2.9  
2.7  
2.3  
1.4  
275  
175  
65  
60  
40  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
8.0  
2.0  
2.0  
5.0  
- 16  
- 20  
- 24  
- 24  
- 28  
- 48  
- 60  
+ 8  
+ 12  
+ 12  
+ 12  
+ 15  
+ 12  
+ 15  
+ 25  
640  
780  
+ 10.5  
+ 10.5  
+ 13  
+ 10.5  
+ 13  
1120  
1285  
1450  
1525  
1950  
8.0  
12.0  
18.0  
32.0  
35  
25  
+ 25  
35 WVDC at + 85 °C . . . 22 WVDC at + 125 °C . . . 21 WVDC at + 200 °C  
15  
68  
270  
C
F
K
135D156X0035C2  
135D686X0035F2  
135D277X0035K2  
6.2  
2.9  
1.4  
175  
60  
26  
0.75  
1.0  
3.0  
1.5  
2.0  
12.0  
- 20  
- 24  
- 58  
+ 10.5  
+ 13  
+ 25  
+ 12  
+ 15  
+ 25  
660  
1195  
1950  
50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C . . . 30 WVDC at + 200 °C  
5
10  
25  
47  
60  
82  
160  
C
C
F
F
T
T
K
135D505X0050C2  
135D106X0050C2  
135D256X0050F2  
135D476X0050F2  
135D606X0050T2  
135D826X0050T2  
135D167X0050K2  
8.0  
6.4  
4.6  
3.7  
2.9  
2.5  
1.5  
400  
250  
95  
70  
45  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
8.0  
2.0  
2.0  
5.0  
- 16  
- 24  
- 20  
- 28  
- 16  
- 32  
- 50  
+ 5  
+ 8  
+ 6  
+ 9  
580  
715  
+ 10.5  
+ 13  
+ 10.5  
+ 13  
+ 25  
+ 12  
+ 15  
+ 12  
+ 15  
+ 25  
1005  
1155  
1335  
1400  
1900  
9.0  
12.0  
16.0  
32.0  
45  
27  
60 WVDC at + 85 °C . . . ꢁ0 WVDC at + 125 °C . . . 36 WVDC at + 200 °C  
4
8.2  
20  
39  
50  
C
C
F
F
T
T
K
135D405X0060C2  
135D825X0060C2  
135D206X0060F2  
135D396X0060F2  
135D506X0060T2  
135D686X0060T2  
135D147X0060K2  
9.3  
6.6  
4.7  
3.4  
2.9  
2.5  
1.5  
550  
275  
105  
90  
50  
50  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
8.0  
2.0  
2.0  
5.0  
- 16  
- 24  
- 16  
- 28  
- 16  
- 32  
- 40  
+ 5  
+ 8  
+ 8  
+ 10.5  
+ 10.5  
+ 10.5  
+ 20  
+ 6  
+ 9  
+ 9  
+ 15  
+ 12  
+ 15  
+ 20  
525  
625  
930  
1110  
1330  
1365  
1850  
9.0  
12.0  
16.0  
32.0  
68  
140  
28  
75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C . . . ꢁ5 WVDC at + 200 °C  
3.5  
6.8  
15  
33  
40  
C
C
F
F
T
T
K
135D355X0075C2  
135D685X0075C2  
135D156X0075F2  
135D336X0075F2  
135D406X0075T2  
135D566X0075T2  
135D117X0075K2  
9.5  
6.8  
5.3  
4.2  
3.0  
2.6  
1.5  
650  
300  
150  
90  
60  
60  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
9.0  
2.0  
2.0  
5.0  
10.0  
12.0  
17.0  
36 .0  
- 16  
- 20  
- 16  
- 24  
- 16  
- 28  
- 35  
+ 5  
+ 8  
+ 8  
+ 10.5  
+ 10.5  
+ 10.5  
+ 20  
+ 6  
+ 9  
+ 9  
+ 15  
+ 12  
+ 15  
+ 20  
525  
610  
890  
1000  
1250  
1335  
1850  
56  
110  
29  
100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C . . . 60 WVDC at + 200 °C  
2.5  
4.7  
11  
22  
25  
30  
43  
56  
86  
C
C
F
F
T
T
T
K
K
135D255X0100C2  
135D475X0100C2  
135D116X0100F2  
135D226X0100F2  
135D256X0125T2  
135D306X0100T2  
135D436X0100T2  
135D566X0125K2  
135D866X0100K2  
10.6  
8.5  
6.0  
4.8  
3.2  
3.3  
2.6  
1.6  
1.6  
950  
500  
200  
100  
93  
80  
70  
32  
30  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
2.0  
10.0  
9.0  
2.0  
2.0  
4.0  
- 16  
- 16  
- 16  
- 16  
- 16  
- 16  
- 20  
- 25  
- 25  
+ 7  
+ 7  
+ 7  
+ 7  
+ 7  
+ 7  
+ 7  
+ 15  
+ 15  
+ 8  
+ 8  
+ 8  
+ 8  
+ 8  
+ 8  
+ 8  
+ 15  
+ 15  
505  
565  
835  
9.0  
965  
13.0  
12.0  
17.0  
40.0  
36.0  
1200  
1240  
1335  
1800  
1800  
Note  
* Part Numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit  
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film  
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit  
in the part number from “2” to “6”. For RoHS compliant add “E3”.  
www.vishay.com  
44  
For technical questions, contact: tantalum@vishay.com  
Document Number: 40024  
Revision: 10-Oct-08  
135D  
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum  
Hermetic Seal for - 55 °C to + 200 °C Operation  
Vishay  
STANDARD RATINGS  
MAX. ESR MAX. IMP.  
MAX. DCL (µA)  
at  
MAX. CAPACITANCE CHANGE  
(%) at  
MAX.  
RIPPLE  
ꢁ0 kHz  
rms  
at  
at  
CAPACITANCE CASE  
PART NUMBER*  
+ 25 °C  
120 Hz  
- 55 °C  
120 Hz  
(µF)  
CODE  
+ 85 °C  
+ 25 °C  
- 55 °C  
+ 85 °C + 125 °C  
+ 125 °C  
125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C . . . 75 WVDC at + 200 °C  
1.7  
3.6  
9
14  
18  
C
C
F
F
T
135D175X0125C2  
135D365X0125C2  
135D905X0125F2  
135D146X0125F2  
135D186X0125T2  
15.6  
10.0  
7.4  
5.7  
3.7  
1250  
600  
240  
167  
129  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
2.0  
5.0  
7.0  
9.0  
- 16  
- 16  
- 16  
- 16  
- 16  
+ 7  
+ 7  
+ 7  
+ 7  
+ 7  
+ 8  
+ 8  
+ 8  
+ 8  
+ 8  
415  
520  
755  
860  
1130  
Note  
* Part Numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit  
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film  
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit  
in the part number from “2” to “6”. For RoHS compliant add “E3”.  
EXTENDED RATINGS  
MAX. ESR MAX. IMP.  
MAX. DCL (µA)  
at  
MAX.. CAPACITANCE  
CHANGE (%) at  
MAX.  
RIPPLE  
ꢁ0 kHz  
rms  
CAPACITANCE CASE  
at  
at  
PART NUMBER*  
(µF)  
CODE  
+ 25 °C  
120 Hz  
- 55 °C  
120 Hz  
+ 85 °C  
+ 25 °C  
- 55 °C  
+ 85 °C + 125 °C  
+ 125 °C  
6 WVDC at + 85 °C . . . ꢁ WVDC at + 125 °C . . . 3.6 WVDC at + 200 °C  
220  
560  
820  
1200  
1500  
2200  
C
F
F
T
T
K
135D227X0006C2  
135D567X0006F2  
135D827X0006F2  
135D128X0006T2  
135D158X0006T2  
135D228X0006K2  
3.0  
2.5  
2.5  
1.5  
1.5  
1.0  
36  
21  
18  
18  
18  
13  
2
3
3
5
5
6
9
9
14  
18  
20  
24  
- 64  
- 77  
- 88  
- 88  
- 90  
- 90  
+ 13  
+ 16  
+ 16  
+ 20  
+ 20  
+ 25  
+ 16  
+ 20  
+ 20  
+ 25  
+ 25  
+ 30  
1000  
1500  
1500  
1900  
1900  
2300  
8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C . . . ꢁ.8 WVDC at + 200 °C  
180  
680  
1500  
1800  
C
F
T
K
135D187X0008C2  
135D687X0008F2  
135D158X0008T2  
135D188X0008K2  
3.0  
2.5  
1.5  
1.0  
45  
22  
18  
14  
2
3
5
7
9
- 60  
- 83  
- 90  
- 90  
+ 13  
+ 16  
+ 20  
+ 25  
+ 16  
+ 20  
+ 25  
+ 30  
1000  
1500  
1900  
2300  
14  
20  
25  
10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C . . . 6 WVDC at + 200 °C  
120  
150  
390  
560  
1200  
1500  
C
C
F
F
T
K
135D127X0010C2  
135D157X0010C2  
135D397X0010F2  
135D567X0010F2  
135D128X0010T2  
135D158X0010K2  
3.2  
3.0  
2.5  
2.5  
1.5  
1.0  
54  
54  
27  
27  
18  
15  
2
2
3
3
5
7
6
9
9
16  
20  
25  
- 40  
- 55  
- 66  
- 77  
- 88  
- 88  
+ 14  
+ 13  
+ 16  
+ 16  
+ 20  
+ 25  
+ 16  
+ 16  
+ 20  
+ 20  
+ 25  
+ 30  
900  
900  
1450  
1450  
1850  
2300  
15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C . . . 9 WVDC at + 200 °C  
82  
100  
270  
390  
680  
820  
1000  
C
C
F
F
T
T
K
135D826X0015C2  
135D107X0015C2  
135D277X0015F2  
135D397X0015F2  
135D687X0015T2  
135D827X0015T2  
135D108X0015K2  
3.9  
3.9  
2.5  
2.5  
1.8  
1.8  
1.2  
72  
72  
31  
31  
22  
22  
17  
2
2
3
3
6
6
8
6
9
9
16  
18  
24  
32  
- 35  
- 44  
- 62  
- 66  
- 74  
- 77  
- 77  
+ 12  
+ 13  
+ 16  
+ 16  
+ 20  
+ 20  
+ 25  
+ 16  
+ 16  
+ 15  
+ 20  
+ 25  
+ 25  
+ 30  
900  
900  
1450  
1450  
1800  
1800  
2330  
25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C . . . 12 WVDC at + 200 °C  
56  
68  
C
C
F
F
T
T
K
135D566X0025C2  
135D686X0025C2  
135D187X0025F2  
135D277X0025F2  
135D477X0025T2  
135D567X0025T2  
135D687X0025K2  
4.3  
4.3  
2.7  
2.7  
1.8  
1.8  
1.2  
90  
90  
33  
33  
24  
24  
19  
2
2
3
3
6
7
8
6
9
9
16  
18  
28  
32  
- 25  
- 40  
- 54  
- 62  
- 65  
- 72  
- 72  
+ 12  
+ 12  
+ 13  
+ 13  
+ 18  
+ 20  
+ 25  
+ 15  
+ 15  
+ 15  
+ 16  
+ 25  
+ 25  
+ 30  
850  
850  
180  
270  
470  
560  
680  
1400  
1400  
1750  
1750  
2100  
Note  
* Part Numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit  
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film  
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit  
in the part number from “2” to “6”. For RoHS compliant add “E3”.  
Document Number: 40024  
Revision: 10-Oct-08  
For technical questions, contact: tantalum@vishay.com  
www.vishay.com  
45  
135D  
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum  
Hermetic Seal for - 55 °C to + 200 °C Operation  
Vishay  
EXTENDED RATINGS  
MAX. ESR MAX. IMP.  
MAX. DCL (µA)  
at  
MAX. CAPACITANCE CHANGE  
(%) at  
MAX.  
RIPPLE  
ꢁ0 kHz  
rms  
CAPACITANCE CASE  
at  
at  
PART NUMBER*  
(µF)  
CODE  
+ 25 °C  
120 Hz  
- 55 °C  
120 Hz  
+ 85 °C  
+ 25 °C  
- 55 °C  
+ 85 °C + 125 °C  
+ 125 °C  
30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C. . . 18 WVDC at + 200 °C  
47  
C
C
F
F
T
T
K
135D476X0030C2  
135D566X0030C2  
135D157X0030F2  
135D227X0030F2  
135D397X0030T2  
135D477X0030T2  
135D567X0030K2  
5.2  
5.2  
2.5  
2.5  
1.8  
1.8  
1.3  
100  
100  
36  
2
2
3
3
6
8
9
6
9
- 23  
- 38  
- 42  
- 60  
- 55  
- 65  
- 65  
+ 12  
+ 12  
+ 13  
+ 13  
+ 18  
+ 20  
+ 25  
+ 15  
+ 15  
+ 15  
+ 16  
+ 25  
+ 25  
+ 30  
800  
800  
56  
150  
220  
390  
470  
560  
9
1200  
1200  
1500  
1500  
2000  
36  
16  
18  
32  
36  
25  
25  
20  
35 WVDC at + 85 °C . . . 22 WVDC at + 125 °C . . . 21 WVDC at + 200 °C  
39  
C
F
T
K
135D396X0035C2  
135D127X0035F2  
135D337X0035T2  
135D477X0035K2  
4.1  
2.5  
1.8  
1.3  
61  
31  
20  
15  
2
3
6
9
6
- 22  
- 40  
- 50  
- 60  
+ 12  
+ 13  
+ 16  
+ 25  
+ 14  
+ 15  
+ 25  
+ 30  
820  
120  
330  
370  
10  
18  
36  
1315  
1640  
2040  
50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C . . . 30 WVDC at + 200 °C  
33  
C
F
F
T
K
135D336X0050C2  
135D107X0050F2  
135D127X0050F2  
135D277X0050T2  
135D337X0050K2  
5.0  
2.8  
2.5  
2.0  
1.5  
135  
49  
2
4
4
8
9
9
- 29  
- 36  
- 42  
- 46  
- 46  
+ 10  
+ 13  
+ 12  
+ 20  
+ 25  
+ 12  
+ 15  
+ 15  
+ 25  
+ 30  
700  
100  
120  
270  
330  
12  
24  
32  
36  
1200  
1200  
1450  
1900  
49  
30  
30  
60 WVDC at + 85 °C . . . ꢁ0 WVDC at + 125 °C . . . 36 WVDC at + 200 °C  
18  
27  
C
C
F
F
T
K
135C186X0060C2  
135D276X0060C2  
135D826X0060F2  
135D107X0060F2  
135D227X0060T2  
135D277X0060K2  
7.0  
5.0  
2.9  
2.5  
1.8  
1.4  
160  
144  
54  
2
3
4
4
8
9
12  
12  
16  
20  
32  
36  
- 20  
- 24  
- 30  
- 36  
- 40  
- 45  
+ 7  
+ 8  
700  
700  
+ 10  
+ 15  
+ 12  
+ 16  
+ 20  
+ 12  
+ 15  
+ 15  
+ 20  
+ 25  
82  
1100  
1100  
1400  
1850  
100  
220  
270  
54  
29  
23  
75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C . . . ꢁ5 WVDC at + 200 °C  
22  
68  
C
F
F
T
K
135D226X0075C2  
135D686X0075F2  
135D826X0075F2  
135D187X0075T2  
135D227X0075K2  
5.1  
3.0  
2.5  
2.2  
1.8  
157  
63  
3
4
12  
16  
24  
36  
40  
- 19  
- 25  
- 30  
- 35  
- 40  
+ 10  
+ 12  
+ 12  
+ 16  
+ 20  
+ 12  
+ 15  
+ 15  
+ 20  
+ 25  
600  
1000  
1000  
1300  
1800  
82  
63  
4
180  
220  
30  
9
24  
10  
100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C . . . 60 WVDC at + 200 °C  
10  
39  
C
F
T
K
135D106X0100C2  
135D396X0100F2  
135D686X0100T2  
135D127X0100K2  
5.9  
3.5  
2.2  
2.7  
200  
80  
3
5
12  
24  
40  
48  
- 17  
- 20  
- 30  
- 35  
+ 10  
+ 12  
+ 14  
+ 15  
+ 12  
+ 15  
+ 16  
+ 17  
800  
1300  
1600  
2000  
68  
40  
10  
12  
120  
30  
125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C . . . 75 WVDC at + 200 °C  
6.8  
27  
47  
68  
82  
C
F
T
K
K
135D685X0125C2  
135D276X0125F2  
135D476X0125T2  
135D686X0125K2  
135D826X0125K2  
11.7  
3.5  
2.2  
2.2  
2.8  
300  
90  
3
12  
24  
40  
44  
48  
- 14  
- 18  
- 26  
- 28  
- 30  
+ 10  
+ 12  
+ 14  
+ 15  
+ 15  
+ 12  
+ 15  
+ 16  
+ 16  
+ 17  
700  
5
1200  
1500  
1850  
1900  
50  
10  
11  
12  
32  
32  
Note  
* Part Numbers listed are for units with 20 % capacitance tolerance insulated capacitors. For 10 % tolerance capacitors, change the digit  
following the letter “X” from “0” to “9”; for 5 %, change the digit following the letter “X" from “0” to “5”. For capacitors without outer polyester-film  
insulation, change the last digit in the part number from “2” to “0”. For capacitors with a high temperature insulating sleeve, change the last digit  
in the part number from “2” to “6”. For RoHS compliant add “E3”.  
www.vishay.com  
46  
For technical questions, contact: tantalum@vishay.com  
Document Number: 40024  
Revision: 10-Oct-08  
Legal Disclaimer Notice  
Vishay  
Disclaimer  
All product specifications and data are subject to change without notice.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf  
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein  
or in any other disclosure relating to any product.  
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any  
information provided herein to the maximum extent permitted by law. The product specifications do not expand or  
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed  
therein, which apply to these products.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this  
document or by any conduct of Vishay.  
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless  
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such  
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting  
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding  
products designed for such applications.  
Product names and markings noted herein may be trademarks of their respective owners.  
Document Number: 91000  
Revision: 18-Jul-08  
www.vishay.com  
1

相关型号：

135D365X0125C3E3

 Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 20% +Tol, 20% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY

135D365X0125C60

 Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 20% +Tol, 20% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED
VISHAY

135D365X0125C8E3

 Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 20% +Tol, 20% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY

135D365X5125C3E3

 Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 5% +Tol, 5% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY

135D365X5125C8E3

 Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 5% +Tol, 5% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY

135D365X9125C2

 Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 10% +Tol, 10% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED
VISHAY

135D365X9125C2E3

 Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 10% +Tol, 10% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY

135D365X9125C3E3

 Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 10% +Tol, 10% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY

135D365X9125C6

 Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 10% +Tol, 10% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED
VISHAY

135D395X0100C2

 Wet Tantalum Capacitors Tantalum-Case
VISHAY

135D396X0035C2

 Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
VISHAY

135D396X0035C2E3

 Tantalum Capacitor, Polarized, Tantalum (wet), 35V, 20% +Tol, 20% -Tol, 39uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明