135D365X0125C60 [VISHAY]
Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 20% +Tol, 20% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED;型号: | 135D365X0125C60 |
厂家: | VISHAY |
描述: | Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 20% +Tol, 20% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED 电容器 |
文件: | 总6页 (文件大小:138K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
135D
Vishay
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
For-55°C to + 200°C Operation
FEATURES
Standard and Extended Ratings.
Model 135D tantalum-case tantalum electrolytic capacitors
incorporate the advantages of all the varieties of electrolytic
capacitors and eliminate most of the disadvantages. These
units have a 3 volt reverse voltage capability at + 85°C and a
higher ripple current capability than any other electrolytic type
with similar combinations of capacitance and case size.
Designed for the aerospace applications, this capacitor was
developed under partial sponsorship of the Marshall Space
Flight Center, NationalAeronautics and SpaceAdministration.
The capacitors have a high resistance to damage from shock
and vibration. Extended range ratings and high temperature
designs are available.
Model 135D capacitors are commercial equivalents of
Tansitor Style;AQ, AR, HAQ, HAR, Mallory-NACC Style; TLT,
TXT, THT, THX and Military Style CLR79 and CLR81,
designed to meet the performance requirements of Military
Specification MIL-PRF-39006/22/25. Capacitors to meet MIL-
PRF-39006/22/25 should be ordered by part numbers shown
in that specification.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55°C to + 85°C. (To + 200°C
Life Test: Capacitors are capable of withstanding a 2000
hour life test at a temperature of + 85°C or + 125°C at the
applicable rated DC working voltage.
with voltage derating.)
Capacitance Tolerance: At 120 Hz, + 25°C. ± 20%
standard. ± 10%, ± 5% available as special.
Following life test:
1. DCL, measured at + 85°C rated voltage, shall not be in
excess of the original requirement.
DC Leakage Current (DCL Max.): At + 25°C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings Tables.
2. The equivalent series resistance shall not exceed 150%
of the initial requirement.
3. Change in capacitance shall not exceed 10% from the
initial measurement.
ORDERING INFORMATION
306
X0
006
C
2
135D
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
CASE CODE
STYLE NUMBER
MODEL
AT + 85°C
This is expressed in
volts. To complete
the three-digit block,
zeros precede the
voltage rating. A
decimal point is
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
Standard
0 = No outer tube.
2 = Outer polyester-
film insulation.
High Temperature
60 = No outer tube
6 = High temperature-
film insulation
X0 = ± 20%
X9 = ± 10%
X5 = ± 5%
See Ratings
and Case
Codes Table.
indicated by an "R"
(6R3 = 6.3 volts).
(above + 125°C).
Packaging: The use of formed plastic trays for packaging this type of axial lead component is standard. Tape and reel is not recom-
mended due to the unit weight.
Document Number: 40024
Revision 01-Sep-03
www.vishay.com
41
For technical questions, contact wettants@vishay.com
135D
Vishay
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
For-55°C to + 200°C Operation
DIMENSIONS in inches [millimeters]
E
L1
E
D
Weld
0.0253 ± 0.002 [0.64 ± 0.05] Dia.
(No. 22 AWG) Tinned Nickel Leads
Solderable and Weldable
Tantalum
L2
CASE CODE
WEIGHT
IN GRAMS
(Max.)
L2
(Max.)
CLR 79/81
EQUIV.
TYPE
135D
D
L1
E
0.734
0.188 ± 0.016
[4.78 ± 0.41]
0.453 + 0.031 - 0.016
[11.51 + 0.79 - 0.41]
1.500 ± 0.250
[38.10 ± 6.35]
2.6
6.2
C
F
T
K
T1
T2
T3
T4
[18.64]
0.922
[23.42]
0.281 ± 0.016
[7.14 ± 0.41]
0.641 + 0.031 - 0.016
[16.28 + 0.79 - 0.41]
2.250 ± 0.250
[57.15 ± 6.35]
1.047
[26.59]
0.375 ± 0.016
[9.53 ± 0.41]
0.766 + 0.031 - 0.016
[19.46 + 0.79 - 0.41]
2.250 ± 0.250
[57.15 ± 6.35]
11.6
17.7
1.343
[34.11]
0.375 ± 0.016
[9.53 ± 0.41]
1.062 + 0.031 - 0.016
[26.97 + 0.79 - 0.41]
2.250 ± 0.250
[57.15 ± 6.35]
*For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body.
STANDARD RATINGS
Max. CAPACITANCE
CHANGE (%) at
Max. ESR Max. IMP. Max. DCL (µA) at
Max. RIPPLE
40kHz
at + 25°C
120 Hz
at - 55°C
120 Hz
CAPACITANCE CASE
+ 85°C
rms
+ 25°C
- 55°C + 85°C
(µF)
CODE PART NUMBER*
(Ohms)
(Ohms)
+ 125°C
+ 125°C
(mA)
6 WVDC at + 85°C . . . 4 WVDC at + 125°C. . . 3.6 WVDC at + 200°C
30
68
C
C
F
F
T
T
K
4.0
3.2
2.0
2.2
1.4
1.3
1.0
100
60
40
25
20
25
20
1.0
1.0
1.0
1.0
2.0
2.0
3.0
2.0
2.0
3.0
6.5
7.9
- 40
- 40
- 40
- 44
- 44
- 64
- 80
+ 10.5
+ 14
+ 14
+ 17.5
+ 14
+ 17.5
+ 25
+ 12
+ 16
+ 16
+ 20
+ 16
+ 20
+ 25
135D306X0006C2
135D686X0006C2
135D147X0006F2
135D277X0006F2
135D337X0006T2
135D567X0006T2
135D128X0006K2
820
960
140
270
330
560
1200
1200
1375
1800
1900
2265
13.0
14.0
8 WVDC at + 85°C . . . 5 WVDC at + 125°C . . . 4.8 WVDC at + 200°C
25
56
C
C
F
F
T
T
K
135D256X0008C2
135D566X0008C2
135D127X0008F2
135D227X0008F2
135D297X0008T2
135D437X0008T2
135D857X0008K2
4.0
3.3
2.6
2.4
1.8
1.4
1.0
1.0
1.0
1.0
1.0
2.0
2.0
4.0
2.0
2.0
2.0
7.0
6.0
- 40
- 40
- 44
- 44
- 64
- 64
- 80
+ 10.5
+ 14
+ 12
+ 16
+ 20
+ 20
+ 20
+ 20
+ 25
820
900
100
59
50
30
25
25
22
120
220
290
430
850
+ 17.5
+ 17.5
+ 17.5
+ 17.5
+ 25
1230
1370
1770
1825
2330
14.0
16.0
10 WVDC at + 85°C . . . 7 WVDC at + 125°C . . . 6 WVDC at + 200°C
20
47
C
135D206X0010C2
135D476X0010C2
135D107X0010F2
135D187X0010F2
135D257X0010T2
135D397X0010T2
135D757X0010K2
4.0
3.7
2.4
2.2
1.8
1.5
1.0
120
90
60
40
30
25
23
1.0
1.0
1.0
1.0
2.0
2.0
4.0
2.0
2.0
4.0
- 32
- 36
- 36
- 36
- 40
- 64
- 80
+ 10.5
+ 14
+ 14
+ 14
+ 14
+ 12
+ 16
+ 16
+ 16
+ 16
+ 20
+ 25
820
855
C
F
F
T
T
K
100
180
250
390
750
1200
1365
1720
1800
2360
7.0
10.0
16.0
16.0
+ 17.5
+ 25
15 WVDC at + 85°C . . . 10 WVDC at + 125°C . . . 9 WVDC at + 200°C
15
33
70
120
170
270
540
C
135D156X0015C2
135D336X0015C2
135D706X0015F2
135D127X0015F2
135D177X0015T2
135D277X0015T2
135D547X0015K2
4.4
4.0
2.8
2.6
2.4
2.2
1.0
155
90
75
50
35
30
23
1.0
1.0
1.0
1.0
2.0
2.0
6.0
2.0
2.0
4.0
- 24
- 28
- 28
- 28
- 32
- 56
- 80
+ 10.5
+ 14
+ 14
+ 17.5
+ 14
+ 17.5
+ 25
+ 12
+ 16
+ 16
+ 20
+ 16
+ 20
+ 25
780
820
C
F
F
T
T
K
1150
1450
1480
1740
2330
7.0
10.0
16.0
24.0
www.vishay.com
42
Document Number: 40024
Revision 01-Sep-03
For technical questions, contact wettants@vishay.com
135D
Vishay
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
For-55°C to + 200°C Operation
STANDARD RATINGS
Max. CAPACITANCE
Max. ESR Max. IMP.
Max. RIPPLE
40kHz
Max. DCL (µA) at
+ 85°C
CHANGE (%) at
at + 25°C
120 Hz
at - 55°C
120 Hz
CAPACITANCE CASE
rms
+ 25°C
- 55°C + 85°C + 125°C
(mA)
(µF)
CODE PART NUMBER*
(Ohms)
(Ohms)
+ 125°C
25 WVDC at + 85°C . . . 15 WVDC at + 125°C . . . 12 WVDC at + 200°C
10
22
C
C
F
F
T
T
K
135D106X0025C2
135D226X0025C2
135D506X0025F2
135D107X0025F2
135D127X0025T2
135D187X0025T2
135D357X0025K2
5.3
4.2
3.0
2.8
2.6
2.2
1.3
220
140
70
1.0
1.0
1.0
1.0
2.0
2.0
7.0
2.0
2.0
- 16
- 20
- 28
- 28
- 32
- 48
- 70
+ 8
+ 10.5
+ 13
+ 13
+ 13
+ 13
+ 25
+ 9
715
800
+ 12
+ 15
+ 15
+ 15
+ 15
+ 25
50
2.0
1130
1435
1450
1525
1970
100
120
180
350
50
10.0
6.0
38
32
18.0
28.0
24
30 WVDC at + 85°C . . . 20 WVDC at + 125°C . . . 18 WVDC at + 200°C
8
C
C
F
F
T
T
K
135D805X0030C2
135D156X0030C2
135D406X0030F2
135D686X0030F2
135D107X0030T2
135D157X0030T2
135D307X0030K2
6.6
6.2
4.0
2.9
2.7
2.3
1.4
275
175
65
1.0
1.0
1.0
1.0
2.0
2.0
8.0
2.0
2.0
- 16
- 20
- 24
- 24
- 28
- 48
- 60
+ 8
+ 12
+ 12
+ 12
+ 15
+ 12
+ 15
+ 25
640
780
15
+ 10.5
+ 10.5
+ 13
40
5.0
1120
1285
1450
1525
1950
68
60
8.0
100
150
300
40
12.0
18.0
32.0
+ 10.5
+ 13
35
25
+ 25
35 WVDC at + 85°C . . . 22 WVDC at + 125°C . . . 21 WVDC at + 200°C
15
68
270
6.2
2.9
1.4
175
60
26
1.5
2.0
12.0
660
1195
1950
C
F
K
135D156X0035C2
135D686X0035F2
135D277X0035K2
0.75
1.0
3.0
- 20
- 24
- 58
+ 10.5
+ 13
+ 25
+ 12
+ 15
+ 25
50 WVDC at + 85°C . . . 30 WVDC at + 125°C . . . 30 WVDC at + 200°C
5
10
25
47
60
82
160
C
C
F
F
T
T
K
135D505X0050C2
135D106X0050C2
135D256X0050F2
135D476X0050F2
135D606X0050T2
135D826X0050T2
135D167X0050K2
8.0
6.4
4.6
3.7
2.9
2.5
1.5
400
250
95
70
45
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
5.0
- 16
- 24
- 20
- 28
- 16
- 32
- 50
+ 5
+ 8
+ 6
+ 9
580
715
+ 10.5
+ 13
+ 10.5
+ 13
+ 25
+ 12
+ 15
+ 12
+ 15
+ 25
1005
1155
1335
1400
1900
9.0
12.0
16.0
32.0
45
27
8.0
60 WVDC at + 85°C . . . 40 WVDC at + 125°C . . . 36 WVDC at + 200°C
4
8.2
20
39
50
C
C
F
F
T
T
K
135D405X0060C2
135D825X0060C2
135D206X0060F2
135D396X0060F2
135D506X0060T2
135D686X0060T2
135D147X0060K2
9.3
6.6
4.7
3.4
2.9
2.5
1.5
550
275
105
90
50
50
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
5.0
+ 5
+ 8
+ 8
+ 10.5
+ 10.5
+ 10.5
+ 20
+ 6
+ 9
+ 9
+ 15
+ 12
+ 15
+ 20
525
625
930
1110
1330
1365
1850
- 16
- 24
- 16
- 28
- 16
- 32
- 40
9.0
12.0
16.0
32.0
68
140
28
8.0
75 WVDC at + 85°C . . . 50 WVDC at + 125°C . . . 45 WVDC at + 200°C
3.5
6.8
15
33
40
C
C
F
F
T
T
K
135D355X0075C2
135D685X0075C2
135D156X0075F2
135D336X0075F2
135D406X0075T2
135D566X0075T2
135D117X0075K2
9.5
6.8
5.3
4.2
3.0
2.6
1.5
650
300
150
90
60
60
1.0
1.0
1.0
1.0
2.0
2.0
9.0
2.0
2.0
5.0
10.0
12.0
17.0
36 .0
- 16
- 20
- 16
- 24
- 16
- 28
- 35
+ 5
+ 8
+ 8
+ 10.5
+ 10.5
+ 10.5
+ 20
+ 6
+ 9
+ 9
+ 15
+ 12
+ 15
+ 20
525
610
890
1000
1250
1335
1850
56
110
29
*Part Numbers listed are for units with ± 20% capacitance tolerance insulated capacitors. For ± 10% tolerance capacitors, change the digit
following the letter "X" from "0" to "9"; for ± 5%, change the digit following the letter "X" from "0" to "5". For capacitors without outer
polyester-film insulation, change the last digit in the part number from "2" to "0". For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from "2" to "6".
Document Number: 40024
Revision 01-Sep-03
www.vishay.com
43
For technical questions, contact wettants@vishay.com
135D
Vishay
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
For-55°C to + 200°C Operation
STANDARD RATINGS
Max. CAPACITANCE
CHANGE (%) at
Max. ESR Max. IMP.
Max. RIPPLE
40kHz
Max. DCL (µA) at
+ 85°C
at + 25°C
120 Hz
at - 55°C
120 Hz
CAPACITANCE CASE
rms
+ 25°C
- 55°C
+ 125°C
(mA)
(µF)
CODE
PART NUMBER*
(Ohms)
(Ohms)
+ 125°C
+ 85°C
100 WVDC at + 85°C . . . 65 WVDC at + 125°C . . . 60 WVDC at + 200°C
2.5
4.7
11
22
30
43
86
C
C
F
F
T
T
K
135D255X0100C2
135D475X0100C2
135D116X0100F2
135D226X0100F2
135D306X0100T2
135D436X0100T2
135D866X0100K2
10.6
8.5
6.0
4.8
3.3
2.6
1.6
950
500
200
100
80
1.0
1.0
1.0
1.0
2.0
2.0
9.0
2.0
2.0
- 16
- 16
- 16
- 16
- 16
- 20
- 25
+ 7
+ 7
+ 7
+ 7
+ 7
+ 7
+ 15
+ 8
+ 8
+ 8
+ 8
+ 8
+ 8
+ 15
505
565
4.0
835
9.0
965
12.0
17.0
36.0
1240
1335
1800
70
30
125 WVDC at + 85°C . . . 85 WVDC at + 125°C . . . 75 WVDC at + 200°C
1.7
3.6
9
14
18
25
56
C
C
F
F
T
T
K
135D175X0125C2
135D365X0125C2
135D905X0125F2
135D146X0125F2
135D186X0125T2
135D256X0125T2
135D566X0125K2
15.6
10.0
7.4
1250
600
240
167
129
93
1.0
1.0
1.0
1.0
2.0
2.0
10.0
2.0
2.0
- 16
- 16
- 16
- 16
- 16
- 16
- 25
+ 7
+ 7
+ 7
+ 7
+ 7
+ 7
+ 15
+ 8
+ 8
+ 8
+ 8
+ 8
+ 8
+ 15
415
520
5.0
755
5.7
7.0
9.0
13.0
40.0
860
3.7
1130
1200
1800
3.2
1.6
32
EXTENDED RATINGS
6 WVDC at + 85°C . . . 4 WVDC at + 125°C . . . 3.6 WVDC at + 200°C
220
560
820
1200
1500
2200
C
F
F
T
T
K
135D227X0006C2
135D567X0006F2
135D827X0006F2
135D128X0006T2
135D158X0006T2
135D228X0006K2
3.0
2.5
2.5
1.5
1.5
1.0
36
21
18
18
18
13
2
3
3
5
5
6
9
9
14
18
20
24
- 64
- 77
- 88
- 88
- 90
- 90
+13
+16
+16
+20
+20
+25
+16
+20
+20
+25
+25
+30
1000
1500
1500
1900
1900
2300
8 WVDC at + 85°C . . . 5 WVDC at + 125°C . . . 4.8 WVDC at + 200°C
C
F
T
K
135D187X0008C2
135D687X0008F2
135D158X0008T2
135D188X0008K2
3.0
2.5
1.5
1.0
45
22
18
14
2
3
5
7
9
- 60
- 83
- 90
- 90
+13
+16
+20
+25
+16
+20
+25
+30
1000
1500
1900
2300
180
680
1500
1800
14
20
25
10 WVDC at + 85°C . . . 7 WVDC at + 125°C . . . 6 WVDC at + 200°C
120
150
390
560
1200
1500
135D127X0010C2
135D157X0010C2
135D397X0010F2
135D567X0010F2
135D128X0010T2
135D158X0010K2
3.2
3.0
2.5
2.5
1.5
1.0
54
54
27
27
18
15
2
2
3
3
5
7
6
9
9
16
20
25
- 40
- 55
- 66
- 77
- 88
- 88
+14
+13
+16
+16
+20
+25
+16
+16
+20
+20
+25
+30
900
900
1450
1450
1850
2300
C
C
F
F
T
K
15 WVDC at + 85°C . . . 10 WVDC at + 125°C . . . 9 WVDC at + 200°C
C
135D826X0015C2
135D107X0015C2
135D277X0015F2
135D397X0015F2
135D687X0015T2
135D827X0015T2
135D108X0015K2
3.9
3.9
2.5
2.5
1.8
1.8
1.2
72
72
31
31
22
22
17
2
2
3
3
6
6
8
6
9
- 35
- 44
- 62
- 66
- 74
- 77
- 77
+12
+13
+16
+16
+20
+20
+25
900
900
1450
1450
1800
1800
2330
82
100
270
390
680
820
1000
+16
+16
+15
+20
+25
+25
+30
C
F
F
T
T
K
9
16
18
24
32
25 WVDC at + 85°C . . . 15 WVDC at + 125°C . . . 12 WVDC at + 200°C
+12
+12
+13
+13
+18
+20
+25
C
C
F
F
T
T
K
56
135D566X0025C2
135D686X0025C2
135D187X0025F2
135D277X0025F2
135D477X0025T2
135D567X0025T2
135D687X0025K2
4.3
4.3
2.7
2.7
1.8
1.8
1.2
90
90
33
33
24
24
19
2
2
3
3
6
7
8
6
9
- 25
- 40
- 54
- 62
- 65
- 72
- 72
+15
+15
+15
+16
+25
+25
+30
850
850
1400
1400
1750
1750
2100
68
180
270
470
560
680
9
16
18
28
32
* Part Numbers listed are for units with ± 20% capacitance tolerance insulated capacitors. For ± 10% tolerance capacitors, change the digit
following the letter "X" from "0" to "9"; for ± 5%, change the digit following the letter "X" from "0" to "5". For capacitors without outer
polyester-film insulation, change the last digit in the part number from "2" to "0". For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from "2" to "6".
www.vishay.com
44
Document Number: 40024
Revision 01-Sep-03
For technical questions, contact wettants@vishay.com
135D
Vishay
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
For-55°C to + 200°C Operation
EXTENDED RATINGS
Max. CAPACITANCE
Max. ESR Max. IMP.
Max. DCL (µA) at
+ 85°C
Max. RIPPLE
40kHz
CHANGE (%) at
at + 25°C
120 Hz
at - 55°C
120 Hz
CAPACITANCE CASE
rms
(µF)
CODE PART NUMBER*
(Ohms)
(Ohms)
+ 25°C
- 55°C + 85°C + 125°C
+ 125°C
(mA)
30 WVDC at + 85°C . . . 20 WVDC at + 125°C. . . 18 WVDC at + 200°C
47
C
C
F
F
T
T
K
135D476X0030C2
135D566X0030C2
135D157X0030F2
135D227X0030F2
135D397X0030T2
135D477X0030T2
135D567X0030K2
5.2
5.2
2.5
2.5
1.8
1.8
1.3
100
100
36
2
2
3
3
6
8
9
6
9
- 23
- 38
- 42
- 60
- 55
- 65
- 65
+12
+12
+13
+13
+18
+20
+25
+15
+15
+15
+16
+25
+25
+30
800
800
1200
1200
1500
1500
2000
56
150
220
390
470
560
9
36
16
18
32
36
25
25
20
35 WVDC at + 85°C . . . 22 WVDC at + 125°C . . . 21 WVDC at + 200°C
C
F
T
K
135D396X0035C2
135D127X0035F2
135D337X0035T2
135D477X0035K2
4.1
2.5
1.8
1.3
61
31
20
15
2
3
6
9
6
- 22
- 40
- 50
- 60
+12
+13
+16
+25
+14
+15
+25
+30
820
39
10
18
36
1315
1640
2040
120
330
370
50 WVDC at + 85°C . . . 30 WVDC at + 125°C . . . 30 WVDC at + 200°C
33
C
F
F
T
K
135D336X0050C2
135D107X0050F2
135D127X0050F2
135D277X0050T2
135D337X0050K2
5.0
2.8
2.5
2.0
1.5
135
49
49
30
30
2
4
4
8
9
9
- 29
- 36
- 42
- 46
- 46
+10
+13
+12
+20
+25
+12
+15
+15
+25
+30
700
100
120
270
330
12
24
32
36
1200
1200
1450
1900
60 WVDC at + 85°C . . . 40 WVDC at + 125°C . . . 36 WVDC at + 200°C
27
82
100
220
270
C
F
F
T
K
135D276X0060C2
135D826X0060F2
135D107X0060F2
135D227X0060T2
135D277X0060K2
5.0
2.9
2.5
1.8
1.4
144
54
3
4
4
8
9
12
16
20
32
36
- 24
- 30
- 36
- 40
- 45
+10
+15
+12
+16
+20
+12
+15
+15
+20
+25
700
1100
1100
1400
1850
54
29
23
75 WVDC at + 85°C . . . 50 WVDC at + 125°C . . . 45 WVDC at + 200°C
22
68
C
F
F
T
K
135D226X0075C2
135D686X0075F2
135D826X0075F2
135D187X0075T2
135D227X0075K2
5.1
3.0
2.5
2.2
1.8
157
63
63
30
24
3
4
12
16
24
36
40
- 19
- 25
- 30
- 35
- 40
+10
+12
+12
+16
+20
+12
+15
+15
+20
+25
600
1000
1000
1300
1800
82
4
180
220
9
10
100 WVDC at + 85°C . . . 65 WVDC at + 125°C . . . 60 WVDC at + 200°C
10
39
C
F
T
K
135D106X0100C2
135D396X0100F2
135D686X0100T2
135D127X0100K2
5.9
3.5
2.2
2.7
200
80
3
5
10
12
12
24
40
48
- 17
- 20
- 30
- 35
+10
+12
+14
+15
+12
+15
+16
+17
800
1300
1600
2000
68
40
120
30
125 WVDC at + 85°C . . . 85 WVDC at + 125°C . . . 75 WVDC at + 200°C
6.8
27
47
82
C
F
T
K
135D685X0125C2
135D276X0125F2
135D476X0125T2
135D826X0125K2
11.7
3.5
300
90
3
5
10
12
12
24
40
48
- 14
- 18
- 26
- 30
+10
+12
+14
+15
+12
+15
+16
+17
700
1200
1500
1900
2.2
50
2.8
32
*Part Numbers listed are for units with ± 20% capacitance tolerance insulated capacitors. For ± 10% tolerance capacitors, change the digit
following the letter "X" from "0" to "9"; for ± 5%, change the digit following the letter "X" from "0" to "5". For capacitors without outer
polyester-film insulation, change the last digit in the part number from "2" to "0". For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from "2" to "6".
Document Number: 40024
Revision 01-Sep-03
www.vishay.com
45
For technical questions, contact wettants@vishay.com
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号:
135D365X0125C8E3
Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 20% +Tol, 20% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
135D365X5125C3E3
Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 5% +Tol, 5% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
135D365X5125C8E3
Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 5% +Tol, 5% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
135D365X9125C2
Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 10% +Tol, 10% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED
VISHAY
135D365X9125C2E3
Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 10% +Tol, 10% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
135D365X9125C3E3
Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 10% +Tol, 10% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
135D365X9125C6
Tantalum Capacitor, Polarized, Tantalum (wet), 125V, 10% +Tol, 10% -Tol, 3.6uF, Through Hole Mount, AXIAL LEADED
VISHAY
135D396X0035C2
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
VISHAY
135D396X0035C2E3
Tantalum Capacitor, Polarized, Tantalum (wet), 35V, 20% +Tol, 20% -Tol, 39uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
135D396X0060F2
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation
VISHAY
135D396X0060F2E3
Tantalum Capacitor, Polarized, Tantalum (wet), 60V, 20% +Tol, 20% -Tol, 39uF, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明