TFS915L [VECTRON]
Filter specification; 过滤器规格
| 型号： | TFS915L |
| 厂家： | 
Vectron International, Inc |
| 描述： | Filter specification |
| 文件： | 总5页 (文件大小：256K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Filename: tfs 915L.doc
Version 1.0
16.08.2005
VI TELEFILTER
Filter specification
TFS 915L
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance:
Input:
23
0
°C
dBm
50
50
Ω
Ω
Output:
Source:
Load:
128 Ω || -2,5 pF
128 Ω || -2,5 pF
Characteristics
Remark:
The reference level for the relative attenuation a of the TFS 915L is the minimum attenuation in the pass band. The minimum attenuation in the pass
rel
band is defined as the insertion loss a . The nominal frequency fN is fixed at 915 MHz without any tolerance or limit. The frequency shift of the filter in the
e
operating temperature range is included in the production tolerance scheme.
D a t a
typ. value
tolerance / limit
a
3,2
-
dB
max.
5,5
915
dB
Insertion loss
e
fN
MHz
Nominal frequency
Passband @3dB
Amplitude ripple
Relative attenuation
PB
1265
0,4
KHz
dB
fN
±
0,35
3,5
within PB
max.
dB
a
rel
@
@
@
@
fN - 10,7
fN + 10,7
fN - 21,4
fN + 21,4
MHz
MHz
MHz
MHz
50
dB
dB
dB
dB
min.
min.
min.
min.
20
dB
dB
dB
dB
45
60
45
20
30
30
-
max.
10
dBm
Input power level
Operating temperature range
OTR
-
- 10 °C ... + 60 °C
Storage temperature range
-
- 40 °C ... + 85 °C
25
°C
-
-
Frequency inversion temperature
Temperature coefficient of frequency
TC
*
- 0,035 ppm/K²
f
*) ∆f (Hz) = Tcf(ppm/K²) x (T - To)² x fCAT (MHz).
c
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 915L.doc
Version 1.0
16.08.2005
VI TELEFILTER
Filter specification
TFS 915L
2/5
Filter characteristic
0
-1
-2
-3
-4
-5
-6
0
-10
-20
-30
-40
-50
-60
-70
-7
895
900
905
910
915
920
925
930
914 914.2 914.4 914.6 914.8 915 915.2 915.4 915.6 915.8
frequency in MHz
frequency in MHz
Construction and pin connection
(All dimensions in mm)
1
2
3
4
5
6
7
Ground
Input
Ground
Ground
Ground
915L
● T34
Output
Ground
8
Ground
Date code: Year + week
T
2005
2006
2007
U
V
...
50 Ω Test circuit
2
6
1, 3, 4, 5, 7, 8
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 915L.doc
Version 1.0
16.08.2005
VI TELEFILTER
Filter specification
TFS 915L
3/5
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel:
IEC 286 – 3, with exeption of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters peer reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
3000
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
P1
P2
Tape (all dimensions in mm)
W
: 12,00 ± 0,3
Po
PIN Marker
t
Do
Po
Do
E
F
G(min)
P2
P1
D1(min)
Ao
Bo
:
:
:
:
:
:
:
:
:
:
:
4,00 ± 0,1
1,50 +0,1/-0
1,75 ± 0,1
5,50 ± 0,05
0,75
2,00 ± 0,05
8,00 ± 0,1
1,50
Ko
Date Code
Typ
D1
Ao
4,30 ± 0,1
4,30 ± 0,1
9,5 ± 0,1
Ct
W
2
Reel (all dimensions in mm)
A
:330
W1
: 12,4 +2/-0
W2(max) : 18,4
N(min)
C
: 50
: 13,0 +0,5/-0,2
C
A
N
W
1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 915L.doc
Version 1.0
16.08.2005
VI TELEFILTER
Filter specification
TFS 915L
4/5
Air reflow temperature conditions
Conditions
Exposure
Average ramp-up rate (30°C to 217°C)
> 100°C
less than 3°C/second
between 300 and 600 seconds
> 150°C
> 217°C
Peak temperature
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
Time / s
max. 300 s
10 ... 30 s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 915L.doc
Version 1.0
16.08.2005
VI TELEFILTER
Filter specification
TFS 915L
5/5
History
Version
Reason of Changes
Generation of Filter specification
Name
Dr. Sabah
Date
16.08.200
1.0
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号：
TFSA100KGE
Fixed Resistor, Metal Glaze/thick Film, 0.5W, 100000ohm, 2% +/-Tol, 100ppm/Cel, Surface Mount, ROHS COMPLIANT
OHMITE
©2020 ICPDF网 联系我们和版权申明