TFS92B [VECTRON]

Filter specification; 过滤器规格
TFS92B
型号: TFS92B
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Filter specification
过滤器规格

过滤器
文件: 总5页 (文件大小:121K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Filename: tfs 92b.doc  
Version 1.2  
03.05.2006  
VI TELEFILTER  
Filter specification  
TFS 92B  
1/5  
Measurement condition  
Ambient temperature:  
Input power level:  
Terminating impedance: *  
Input:  
23  
0
°C  
dBm  
2530 || -8,1 pF  
2380 || -9,4 pF  
Output:  
Characteristics  
Remark:  
The reference level for the relative attenuation a of the TFS 92B is the minimum of the pass band attenuation a  
. The minimum of the pass band  
rel  
min  
attenuation a  
min  
is defined as the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 3 dB  
e c  
filter attenuation level relative to the insertion loss a . The temperature coefficient of frequency Tcf is valid for both the reference frequency f and the  
e
c
frequency response of the filter in the operating temperature range.  
D a t a  
typ. value  
tolerance / limit  
Insertion loss  
a
11,3  
dB  
max.  
15  
dB  
e
(reference level)  
Nominal frequency  
Centre frequency  
Passband  
fN  
-
92,0  
-
MHz  
fC  
92,01  
MHz  
PB  
fN  
±
500  
0,8  
0,5  
kHz  
dB  
Pass band ripple  
0,4  
0,2  
dB  
dB  
max.  
max.  
Amplitude ripple in any 112,5 kHz segment within PB  
p-p  
dB  
Relative attenuation  
a
rel  
fN  
fN  
±
500  
1,5  
3
3
1
kHz  
0,4  
dB  
max.  
0,8  
dB  
fN  
fN  
±
±
1,1  
1,5  
0,3  
3
MHz  
MHz  
MHz  
MHz  
fN  
fN  
fN  
fN  
±
±
-
MHz  
MHz  
MHz  
GHz  
47  
48  
60  
65  
dB  
dB  
dB  
dB  
min.  
min.  
min.  
min.  
39  
40  
50  
50  
dB  
dB  
dB  
dB  
fN  
+
+
Group delay  
at fN  
2,3  
µs  
max.  
4
µs  
Group delay ripple in any 112,5 kHz segment within PB  
Phase linearity in any 112,5 kHz segment within PB  
Triple transit response suppression  
60  
ns  
max.  
120  
ns  
p-p  
1,4  
38  
deg  
dB  
max.  
min.  
5
deg  
dB  
35  
Input power level  
-
max.  
23  
dBm**)  
Operating temperature range  
Storage temperature range  
OTR  
-
-
- 40 °C ... + 70°C  
- 40 °C ... + 100°C  
Frequency inversion temperature  
Temperature coefficient of frequency  
15  
°C  
-
-
TC **  
f
-0,036 ppm/K2  
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values  
only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.  
**) This power level is only allowed for short term operation (10% of the life time), the max. input power for continuous operation is max.15dBm only  
***) f(Hz) = TC (ppm/K2) x (T-T0)2 x f (MHz)  
f
To  
Generated:  
Checked / Approved:  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 92b.doc  
Version 1.2  
03.05.2006  
VI TELEFILTER  
Filter specification  
TFS 92B  
2/5  
Filter characteristic  
0
0
-1  
3.06  
2.97  
2.88  
2.79  
2.7  
-7  
-14  
-21  
-28  
-35  
-42  
-49  
-56  
-63  
-70  
-2  
-3  
-4  
-5  
2.61  
2.52  
2.43  
2.34  
2.25  
-6  
-7  
-8  
-9  
-10  
2.16  
82  
84  
86  
88  
90  
92  
94  
96  
98  
100  
102  
91.25  
91.4  
91.55  
91.7  
91.85  
92  
92.15  
92.3  
92.45  
92.6  
92.75  
frequency in MHz  
frequency in MHz  
Construction and pin connection  
(All dimensions in mm)  
10  
6
1
Input  
2
3
4
5
6
7
8
9
Ground  
Ground  
Ground  
Output  
Output  
Ground  
Ground  
Ground  
Input  
TFS 92B  
U18  
1
5
+0,20  
-0,10  
19  
Date code  
10  
1,02  
1
Date code: Year + week  
U
V
W
...  
2006  
2007  
2008  
1,91  
7,62  
50 Ohm Test circuit  
1
5
6
L3  
L1  
L2  
C2  
C1  
SAW  
10  
L4  
2, 3, 4, 7, 8, 9  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 92b.doc  
Version 1.2  
03.05.2006  
VI TELEFILTER  
Filter specification  
TFS 92B  
3/5  
Stability characteristics, reliability  
After the following tests the filter shall meet the whole specification:  
1. Shock:  
500g, 1 ms, half sine wave, 3 shocks each plane;  
DIN IEC 68 T2 - 27  
2. Vibration:  
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;  
DIN IEC 68 T2 - 6  
3. Change of  
temperature:  
-55 °C to 125°C / 30 min. each / 10 cycles  
DIN IEC 68 part 2 – 14 Test N  
4. Resistance to  
solder heat (reflow):  
reflow possible: twice max.;  
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;  
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)  
Packing  
Tape & Reel:  
IEC 286 – 3, with exception of value for N and minimum bending radius;  
tape type II, embossed carrier tape with top cover tape on the upper side;  
max. pieces of filters per reel:  
reel of empty components at start:  
reel of empty components at start including leader:  
trailer:  
2000  
min. 300 mm  
min. 500 mm  
min. 300 mm  
Pull Off Direction  
P1  
Tape (all dimensions in mm)  
t
Do  
Po  
P2  
Ao  
Date Code  
W
: 32,00 ± 0,3  
Po  
Do  
E
:
:
:
4,00 ± 0,1  
1,50 +0,1/-0  
1,75 ± 0,1  
F
: 14,20 ± 0,1  
2,00 ± 0,1  
: 12,00 ± 0,1  
P2  
P1  
D1(min)  
Ao  
Bo  
So  
Ct  
:
Ko  
:
:
2,00  
7,10 ± 0,1  
: 19,60 ± 0,1  
: 28,40 ± 0,1  
: 25,5 ± 0,1  
PIN Marker  
Type  
D1  
W
Reel (all dimensions in mm)  
2
A
:330  
W1  
: 32,4 +2/-0  
W2(max) : 38,4  
N(min)  
C
:100  
: 13,0 +0,5/-0,2  
C
A
N
W
1
The minimum bending radius is 45 mm.  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 92b.doc  
Version 1.2  
03.05.2006  
VI TELEFILTER  
Filter specification  
TFS 92B  
4/5  
Air reflow temperature conditions  
Conditions  
Exposure  
Average ramp-up rate (30°C to 217°C)  
> 100°C  
less than 3°C/second  
between 300 and 600 seconds  
> 150°C  
> 217°C  
Peak temperature  
between 240 and 500 seconds  
between 30 and 150 seconds  
max. 260°C  
Time within 5°C of actual peak temperature  
Cool-down rate (Peak to 50°C)  
Time from 30°C to Peak temperature  
between 10 and 30 seconds  
less than 6°C/second  
no greater than 300 seconds  
Chip-mount air reflow profile  
Temperature / °C  
max. 260°C  
217°C  
Time / s  
max. 300 s  
10 ... 30 s  
30 ... 150 s  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 92b.doc  
Version 1.2  
03.05.2006  
VI TELEFILTER  
Filter specification  
TFS 92B  
5/5  
History  
Version  
1.0  
Reason of Changes  
- Generation of development specification  
Name  
Strehl  
Strehl  
Date  
18.10.2005  
15.11.2005  
1.1  
- Change relative attenuation  
- Change “stability characteristics” to “stability characteristics, reliability”  
1.2  
- terminating impedances, typical values and filter characteristic added  
Pfeiffer  
03.05.2006  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  

相关型号:

TFS92D

Filter specification
VECTRON

TFS935

Filter specification
VECTRON

TFS942

Development Specification
ANALOGICTECH

TFS942G

Vectron International
VECTRON

TFS986A

Filter specification
VECTRON

TFS99

Filter specification
VECTRON

TFSA100KFE

Surge Capable Thick Film Non Inductive
OHMITE

TFSA100KGE

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 100000ohm, 2% +/-Tol, 100ppm/Cel, Surface Mount, ROHS COMPLIANT
OHMITE

TFSA100KJE

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 100000ohm, 5% +/-Tol, 100ppm/Cel, Surface Mount, ROHS COMPLIANT
OHMITE

TFSA100KKE

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 100000ohm, 10% +/-Tol, 100ppm/Cel, Surface Mount, ROHS COMPLIANT
OHMITE

TFSA100RFE

Surge Capable Thick Film Non Inductive
OHMITE

TFSA100RGE

Fixed Resistor, Metal Glaze/thick Film, 0.5W, 100ohm, 2% +/-Tol, 100ppm/Cel, Surface Mount, ROHS COMPLIANT
OHMITE