LSM0603412V [VCC]
Single Color LED,;
| 型号： | LSM0603412V |
| 厂家： | 
Visual Communications Company |
| 描述： | Single Color LED, 光电 |
| 文件： | 总8页 (文件大小：238K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LSM0603 Series
0603 SMD LED packages
1.6 x 0.8 x 0.55 mm LED Lamp
LSM0603412V Red SMD LED. High intensity light output,
low power consumption, low profile and wide viewing angle.
Application
• Wearable Device
• Home and Smart Appliances • Health Care Application
• Automotive Features
• Navigations Systems
• Backlit Keypads
• Medical
• IoT
• Industrial Control Systems
Key features
•
•
•
•
1.6 mm x 0.8 mm (0603 package/1608 metric) Chip SMD LED
0.55 mm in thickness
Low power consumption
Rectangle flat top LED
• Wide viewing angle (120°)
•
•
•
•
Optimized light coupling by inter reflector
GaInP technology
Available in a range of colors: red, white, green, blue and yellow making it ideal for status indication
Cost-efficient solution for low-power and compact electronic equipment designs
•
Compatible with automatic placement equipment and available in automation-friendly tape and reel
•
•
•
Ideal for special configurations for automated PC board assembly and space-sensitive applications
Pb-free
Moisture sensitivity level: 3
•
Package 4,000 pieces per reel
• Compliant with RoHS and REACH
Your first call for illuminated components
vcclite.com 1.800.522.5546
06/18 Rev1
LSM0603412V | Page 1 of 8
Ordering Data
Series
Type of LED
Package Size
Lens Coloring
Color
Voltage
L
SM
0603
4
1
2V
Series
Voltage
L
LED
2V
3V
2 Volt*
3 Volt**
Mounting Type
Color
*Red and Yellow
SM
SMD
**White, Green and Blue
1
4
5
6
7
Red
White
Green
Blue
Package Size
0603
0603 Package
Yellow
Lens Coloring
Water Clear
4
Package Dimensions
1
2
1
2
Polarity
1.20 [0.047]
1.60 [0.062]
0.30 [0.011]
1.10 [0.043]
Recommended Soldering Pattern
0.70 [0.027]
0.70 [0.027] 0.70 [0.027]
Note: The tolerance unless mentioned is ± 0.1mm [0.005 in] ; Unit=mm [in]
Your first call for illuminated components
vcclite.com 1.800.522.5546
06/18 Rev1
LSM0603412V | Page 2 of 8
Product Specifications
Absolute Maximum Ratings (ta=25˚C)
Items
Symbol
Ratings
Unit
Reverse Voltage
VR
5
V
Forward Current
If
20
-40~+85
-40~+100
2000
mA
˚C
Operation Temperature
Storage Temperature
Electrostatic Discharge (HBM)
Power Dissipation
Topt
Tstg
ESD
Pt
˚C
V
75
MW
Peak Forward Current
(Duty 1/10 @1KHZ)
IFP
50
MA
Soldering Temperature
Tsol
Reflow Soldering: 240°C for 10 sec
Parameter
Symbol Min
Typ.
Max.
Unit
mcd
Condition
IF=20mA
V
Luminous Intensity
Peak Wavelength
Dominant Wavelength
Spectrum Radiation Bandwidth
Forward Voltage
I
50
--
__
80
λP
λd
Δλ
635
--
--
nm
nm
nm
v
IF=20mA
IF=20mA
IF=20mA
IF=20mA
IF=20mA
631
--
639
--
20
--
F
V
1.7
-
2.3
-
Viewing Angle
θ
120
-
deg
uA
R
R
V
Reverse Current
I
-
5
V =5
Note:
1. Tolerance of Luminous Intensity ±3%
2. Tolerance of Dominant Wavelength ±1nm
3. Tolerance of Forward Voltage ±0.03V
Your first call for illuminated components
06/18 Rev1
vcclite.com 1.800.522.5546
LSM0603412V | Page 3 of 8
Product Specifications
Typical Electrical-Optical Characteristics Curves
Spectrum Distribution
Forward Current Vs. Forward Voltage
F
Wavelength λp (nm)
Forward Voltage (V ) - volts
Luminous Intensity Vs. Ambient Temperature
Luminous Intensity Vs. Forward Current
Ambient Temperature Ta (˚C)
Forward Current IF (mA) Radiation Diagram
Forward Current Derating Curve
Ambient Temperature Ta (˚C)
Your first call for illuminated components
vcclite.com 1.800.522.5546
06/18 Rev1
LSM0603412V | Page 4 of 8
Reliability Data
The reliability of products shall be satisfied with items listed below. Confidence level: 90%
LTPD: 10%
Test
Hours/Cycles
Sample
Size
No
Items
Test Condition
Temp: 260±5˚C
Ac/Re
0/1
1
Reflow Soldering
6 min
22 PCS
H: +100˚C 15 min
5 min
2
3
Temperature Cycle
Thermal Shock
300 Cycles
22 PCS
0/1
0/1
L: -40˚C 15 min
H: +100˚C 5 min
10 sec
300 Cycles
22 PCS
L: -10˚C 5 min
4
5
6
7
High Temperature Storage
Low Temperature Storage
DC Operating Life
Temp: 100˚C
Temp:-40˚C
IF=20mA
1000 Hrs
1000 Hrs
1000 Hrs
1000 Hrs
22 PCS
22 PCS
22 PCS
22 PCS
0/1
0/1
0/1
0/1
High Temperature High Humidity 85˚C/85%RH
Your first call for illuminated components
vcclite.com 1.800.522.5546
06/18 Rev1
LSM0603412V | Page 5 of 8
Recommended Reflow Soldering Profile
• Hand Soldering
A soldering iron of less them 20W is recommended to be used in Hand Soldering. Please keep the
temperature of the soldering iron under 300° C while soldering. Each terminal of the LED is to go for
less than 3 seconds and for one time only.
Be careful because the damage to the product is often started at the time of the hand soldering.
• Reflow Soldering
Use the conditions shown in the figure below for PB-Free Reflow Soldering.
• Reflow soldering should not be done more than two times.
• Stress on the LEDs should be avoided during heating in soldering process.
• After soldering, do not handle the product before its temperature drops down to room temperature.
Your first call for illuminated components
vcclite.com 1.800.522.5546
06/18 Rev1
LSM0603412V | Page 6 of 8
Precautions
• Storage
Moisture proof and anti-electrostatic package with moisture absorbent material are used, to keep
moisture to a minimum.
Before opening the package, the product should be kept at 30°C or less and humidity less than
60%Rh, and be used within a year.
Afer opening the package, the product should be stored at 30°C or less and humidity less than
10%RH, and be soldered within 24 hours. It is recommended that the product be operated at the
workshop condition of 30°C or less and humidity less than 60%RH.
If the moisture absorbent material has faded away or the LEDs have exceeded the storage time.
Baking should be performed based on the following condition: (60+5C) for 12 hours.
• Static Electricity
Static electricity or surge voltage damages the LEDs. Damaged LEDs will show some unusual charac-
teristics such as the forward voltage becomes lower, or the LEDs do not light at the low current, even
not light.
All devices, equipment, and machinery must be properly grounded. At the same time, it is recom-
mended that wristbands or anti-electrostatic gloves, anti-electrostatic containers be used when deal-
ing with the LEDs.
Circuit Design Notes
• Design Consideration
In designing a circuit, the current through each LED must not exceed the absolute maximum rating
specified for each LED. In the meanwhile, resistors for protection should be applied, otherwise slight
voltage shift will cause big current change, burn out may happen.
For Test VF
For Test IR
IF=20mA VF=1.7/2.3
VR=5V IR<5uA
• Thermal Design
Is paramount importance because heat generation may result in the Characteristics decline, such as
brightness decreased, Color changed and so on. Please consider the heat generation of the LEDs
when making the system design.
Your first call for illuminated components
vcclite.com 1.800.522.5546
06/18 Rev1
LSM0603412V | Page 7 of 8
Tape and Reel Specifications
2.2 [0.086]
Ø13.0 [0.511]
9.0 [0.035]
12.0 [0.47]
2.0 [0.078]
4.0 [0.157]
1.50 [0.059]
0.25 [0.01]
4.0 [0.157]
0.9 [0.035]
0.6 [0.023]
Polarity
Note: The tolerance unless mentioned is ± 0.1mm [0.005 in] ; Unit=mm [in]
Compliances and Approvals
Your first call for illuminated components
vcclite.com 1.800.522.5546
06/18 Rev1
LSM0603412V | Page 8 of 8
相关型号：
LSM140JE3/TR13
Rectifier Diode, Schottky, 1 Element, 1A, 40V V(RRM), Silicon, DO-214BA, DO-214BA, 2 PIN
MICROSEMI
©2020 ICPDF网 联系我们和版权申明