L4075L-AF5-R [UTC]

40V LED DRIVER WITH INTERNAL SWITCH;
L4075L-AF5-R
型号: L4075L-AF5-R
厂家: Unisonic Technologies    Unisonic Technologies
描述:

40V LED DRIVER WITH INTERNAL SWITCH

驱动
文件: 总5页 (文件大小:188K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
L4075  
Preliminary  
CMOS IC  
40V LED DRIVER WITH  
INTERNAL SWITCH  
DESCRIPTION  
The UTC L4075 is a continuous conduction mode inductive  
step-down converter, designed for driving single or multiple series  
connected LEDs efficiently from a voltage source higher than the  
total LEDs chain voltage. The chip operates from an input supply  
between 6V and 40V and provides an externally adjustable output  
current of up to 400mA. Depending upon supply voltage and  
external components, this can provide up to 30W of output power.  
The UTC L4075 includes an integrated output switch and a  
high-side output current sensing circuit, which uses an external  
resistor to set the nominal average output current.  
Output current can be adjusted linearly by applying an external  
control signal to the ADJ pin. The ADJ pin will accept either a DC  
voltage dimming or a wide range of pulsed dimming. This will  
provide either a continuous or a gated output current.  
Applying a voltage of 0.2V or lower to the ADJ pin can turn the  
output off and switch the chip into a low current standby state.  
FEATURES  
* 6V~40V input voltage range  
* Simple low parts count  
* Internal 40V power switch  
* High efficiency up to 95%  
* Typical 5% output current accuracy  
* Single pin on/off and brightness control using DC voltage or PWM  
* Up to 1MHz switching frequency  
* Protection features:  
Open-circuit LED Protection  
Thermal shutdown Protection  
ORDERING INFORMATION  
Ordering Number  
Package  
SOT-25  
Packing  
Tape Reel  
Lead Free  
Halogen Free  
L4075G-AF5-R  
L4075L-AF5-R  
www.unisonic.com.tw  
Copyright © 2018 Unisonic Technologies Co., Ltd  
1 of 5  
QW-R125-030.b  
L4075  
Preliminary  
CMOS IC  
MARKING  
PIN CONFIGURATION  
PIN DESCRIPTION  
PIN NO.  
PIN NAME  
LX  
DESCRIPTION  
1
2
3
4
5
Drain of power switch  
Ground (0V)  
GND  
ADJ  
Multi-function On/Off and brightness control pin  
Current sense input  
ISENSE  
VIN  
Input voltage  
BLOCK DIAGRAM  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 5  
QW-R125-030.b  
www.unisonic.com.tw  
L4075  
Preliminary  
CMOS IC  
ABSOLUTE MAXIMUM RATING  
PARAMETER  
SYMBOL  
VIN  
RATINGS  
+50  
UNIT  
V
Input Voltage  
ISENSE Voltage  
VIN>5V  
VIN<5V  
VIN+0.3 ~ VIN-5  
VIN+0.3 ~ -0.3  
-0.3 ~ +50  
-0.3 ~ +6  
400  
V
VISENSE  
V
LX Output Voltage  
VLX  
VADJ  
ILX  
V
Adjust Pin Input Voltage  
Switch Output Current  
V
mA  
mW  
°C  
°C  
°C  
Power Dissipation  
PD  
370  
Operating Junction Temperature  
Operating Temperature Range  
Storage Temperature Range  
TJ  
150  
TOPR  
TSTG  
-40 ~ +85  
-55 ~ +150  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
THERMAL CHARACTERISTICS  
PARAMETER  
SYMBOL  
RATINGS  
270  
UNIT  
°C/W  
Junction to Ambient  
θJA  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 5  
QW-R125-030.b  
www.unisonic.com.tw  
L4075  
Preliminary  
CMOS IC  
ELECTRICAL CHARACTERISTICS (VIN=12V, TAMB=25°C unless otherwise stated) (Note 1)  
PARAMETER  
SYMBOL  
VIN  
TEST CONDITIONS  
MIN  
6
TYP MAX UNIT  
Input Voltage  
40  
80  
V
Quiescent Supply Current with Output Off  
Quiescent Supply Current with Output  
Switching  
IINQOFF ADJ Pin Grounded  
40  
60  
μA  
IINQON  
ADJ Pin Floating  
450  
600  
μA  
Mean Current Sense Threshold Voltage  
Sense Threshold Hysteresis  
ISENSE Pin Input Current  
VSENSE  
VSENSEHYS  
ISENSE  
113  
±15  
8
mV  
%
VSENSE=0.1V  
10  
μA  
Measured on ADJ Pin with  
Pin Floating  
Internal Reference Voltage  
VREF  
VADJ  
1.2  
V
V
V
V
External Control Voltage Range On ADJ Pin  
for DC Brightness Control  
0.3  
0.15  
0.2  
1.2  
0.25  
0.3  
DC Voltage On ADJ Pin to Switch Chip from  
Active (On) State to Quiescent (Off) State  
DC Voltage On ADJ Pin to Switch Chip from  
Quiescent (Off) State to Active (On) State  
Resistance Between ADJ Pin and VREF  
Continuous LX Switch Current  
VADJOFF VADJ Falling  
VADJON VADJ Rising  
0.2  
0.25  
RADJ  
500  
KΩ  
A
ILXmean  
0.35  
LX Switch Leakage Current  
ILX(leak)  
1
μA  
LX Switch “On” Resistance  
RLX  
0.9  
200  
200  
1.5  
Minimum Switch “ON” Time  
TONMIN LX Switch “ON”  
TOFFMIN LX Switch “OFF”  
ns  
ns  
Minimum Switch “OFF” Time  
PWM Frequency=100Hz,  
Brightness Control Range at Low Frequency  
PWM Signal  
PWM Amplitude=5V,  
VIN=15V, Driving 1LED,  
L=27μH  
DPWM(LF)  
1200:1  
PWM Frequency=10KHz,  
PWM Amplitude=5V,  
VIN=15V, Driving 1LED,  
L=27μH  
Brightness Control Range at Low Frequency  
PWM Signal  
DPWM(HF)  
13:1  
154  
ADJ Pin Floating L=100Μh  
(0.82) IOUT=350mA @  
Operating Frequency  
fLX  
KHz  
MHz  
VLED=3.4V Driving 1 LED  
Recommended Maximum Operating  
Frequency  
fLXMAX  
DLX  
1
Recommended Duty Cycle Range of Output  
Switch at fLXmax  
0.3  
0.7  
0.9  
Internal Comparator Propagation Delay  
Thermal Shutdown Temperature  
Thermal Shutdown Hysteresis  
TPD  
TSD  
50  
140  
20  
ns  
°C  
°C  
TSD-HYS  
Note: Production testing of the chip is performed at 25°C. Functional operation of the chip and parameters specified  
are guaranteed by design, characterization and process control in other temperature.  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 5  
QW-R125-030.b  
www.unisonic.com.tw  
L4075  
Preliminary  
CMOS IC  
TYPICAL APPLICATION CIRCUIT  
VIN (DC)= 6V~40V  
C1  
1µF  
D1  
1
5
LX  
VIN  
UTC L4075  
2
3
GND  
4
ISENSE  
ADJ  
Up to 10  
LEDs  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other  
parameters) listed in products specifications of any and all UTC products described or contained herein.  
UTC products are not designed for use in life support appliances, devices or systems where malfunction  
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in  
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to  
make changes to information published in this document, including without limitation specifications and  
product descriptions, at any time and without notice. This document supersedes and replaces all  
information supplied prior to the publication hereof.  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 5  
QW-R125-030.b  
www.unisonic.com.tw  

相关型号:

L4075_18

40V LED DRIVER WITH INTERNAL SWITCH
UTC

L408

HiPerFREDTM Epitaxial Diode with soft recovery
IXYS

L41

Schottky Barrier Double Diode
KEXIN

L41-B0-20-410-22B-KG

Magnetic Circuit Breaker,
Carling Techn

L41-B0-20-410-25B-K3

Magnetic Circuit Breaker,
Carling Techn

L41-B0-20-410-43A-KG

Magnetic Circuit Breaker,
Carling Techn

L41-B0-20-410-46A-K3

Magnetic Circuit Breaker,
Carling Techn

L41-B0-20-410-481-KA

Magnetic Circuit Breaker,
Carling Techn

L41-B0-20-410-E1A-DA

Magnetic Circuit Breaker,
Carling Techn

L41-B0-20-410-E42-KG

Magnetic Circuit Breaker,
Carling Techn

L41-B0-20-410-E72-K3

Magnetic Circuit Breaker,
Carling Techn

L41-B0-20-410-H22-DA

Magnetic Circuit Breaker,
Carling Techn