3513EG-D16-T [UTC]
PC POWER SUPPLY SUPERVISOR; PC电源监控器型号: | 3513EG-D16-T |
厂家: | Unisonic Technologies |
描述: | PC POWER SUPPLY SUPERVISOR |
文件: | 总11页 (文件大小:346K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
3513
CMOS IC
PC POWER SUPPLY
SUPERVISOR
SOP-16
DIP-16
DESCRIPTION
The UTC 3513 is designed to provide protection circuits, power good
output (PGO) indicator, fault protection output (FPOB) and a PSONB
control for PC switching power supply systems.
The protection circuits include over voltage protection (OVP), under
voltage protection (UVP) and over current protection(OCP) monitoring
for 3.3V, 5V and two 12V.
When 3.3V, 5V or 12V voltage is decreasing to 2.68V, 4.3V and 9.9V
respectively, the under voltage protection (UVP) function will be
enabled. FPO will be set to high to turn off the PWM controller IC.
Toggling the PSONB from low to high will reset the fault protection
latch.
The voltage difference across external current shunt is used for OCP functions. An external resistor can be used
to adjust protection threshold.
The power supply is turned on after 38mS delay time when PSONB signal is set from high to low. To turn off
power supply, PSONB signal is set from low to high with the delay time 38mS. The PGI circuitry provides a
power-down warning signal for PGO. When PGI input is lower than the internal 1.20V reference voltage, PGO signal
is pulled low.
The device is available in two versions: UTC 3513E/3513F. Specially, fan control function is available in OTP/FC
pin of UTC 3513F.
FEATURES
* OVP/UVP monitors 3.3V, 5V, 12V input voltage level.
* OCP monitors IS33, IS5, IS12 input current sense.
* Fault protection output (FPOB) with Open Drain Output stage.
* Power good output (PGO) with Open Drain Output stage.
* 38ms de-bounce time for PSONB input signal.
* 300ms time delay from PGI to PGO.
* 2.4ms time delay for PSONB to turn off FPOB.
ORDERING INFORMATION
Ordering Number
Package
Packing
Lead Free
Halogen Free
3513EL-D16-T
3513EL-S16-R
3513EL-S16-T
3513FL-D16-T
3513FL-S16-R
3513FL-S16-T
3513EG-D16-T
3513EG-S16-R
3513EG-S16-T
3513FG-D16-T
3513FG-S16-R
3513FG-S16-T
DIP-16
SOP-16
SOP-16
DIP-16
Tube
Tape Reel
Tube
Tube
SOP-16
SOP-16
Tape Reel
Tube
www.unisonic.com.tw
Copyright © 2012 Unisonic Technologies Co., Ltd
1 of 11
QW-R502-129.B
3513
CMOS IC
PIN ASSIGNMENT
PIN DESCRIPTIONS
PIN NO
PIN NAME
PGI
TYPE
DESCRIPTION
Power Good Input. For ATX SMPS, it detects AC line voltage through the
main transformer.
1
2
3
Input
GND
Supply
Output
Ground
Fault Protection Output. Output signal to control the primary PWM IC through
an opto-coupler. When FPOB is low, the PWM IC is enabled.
Remote On/Off logic input from CPU or main-board. The power supply will be
turned on/off after 38mS delay.
FPOB
4
5
6
PSONB
OTP/FC
RI
Input
Input
Input
Over temperature protection/Fan speed control
Reference setting. One external resistor Ri connected between RI and GND
pin will determine a reference current, IREF = 1.20/Ri, for OCP programming.
12V over/under voltage protection.
7
8
VS12B
Input
Input
Output
Input
Input
Input
Input
Input
Input
Input
Supply
IS12B
PWM**
IS12A
*
12V over current protection.
8
Pulse width modulation.
9
*
12V over current protection.
9
IS12AB**
VS12A
IS33
12V over current protection.
10
11
12
13
14
15
12V over/under voltage protection.
3.3V over current protection
VS33
IS5
3.3V over/under voltage protection
5V over current protection.
VS5
5V over/under voltage protection.
VDD
Power supply.
Power good logic output, 0 or 1(open-drain). Power good=1 means that the
power supply is good for operation. The power good delay is 300mS.
16
PGO
Output
* 3513E only
** 3513F only
UNISONIC TECHNOLOGIES CO., LTD
2 of 11
QW-R502-129.B
www.unisonic.com.tw
3513
CMOS IC
FUNCTION DESCRIPTION(1)
T(PSONB ON)/
T(PSONB OFF)
38ms
ORDERING
OTP low level
OTP high level
FC/PWM
tg2
3513E
3513F
2.45V
2.45V
3.25V
3.25V
X
○
73μs
73μs
38ms
FUNCTION DESCRIPTION(2)
PGI
PSONB
UV&OC Protection OV Protection
FPOB
PGO
PGI<1.2V
PGI<1.2V
PGI<1.2V
PGI<1.2V
PGI>1.2V
PGI>1.2V
PGI>1.2V
PGI>1.2V
X
L
L
L
L
L
L
L
L
H
No
No
No
Yes
No
L
H
L
L
L
L
L
H
L
L
L
L
Yes
Yes
No
Yes
No
H
L
No
Yes
No
H
H
H
H
Yes
Yes
X
Yes
X
Note: FPOB=L means: fault is not latched. FPOB=H means: fault is latched
PGO=L means: fault. PGO=H means: No fault
X=do not care
UNISONIC TECHNOLOGIES CO., LTD
3 of 11
QW-R502-129.B
www.unisonic.com.tw
3513
CMOS IC
BLOCK DIAGRAM
VDD
RST
PGO
+
PGI
300ms
delay
73 μs
debounce
UN
clr
-
Bandgap
Reference
V
REF=1.2V
V12A
+
I
S33
-
IREF*8
73 μs
debounce
FPOB
R Q
S Q
VS33
+
OV
-
+
UN
-
Internal
Power
V12A
Power On Reset
PWR
IS12A
+
VCCI=3.6
V
-
IREF*8
2.4ms
delay
38 ms
debounce
PSONB
OTP
+
VS12A
OV
-
75ms/ 300ms
delay
+
2.4V~3.2V
UN
-
V12A
PWR
OSC
IS12B
+
-
IREF*8
CLK
+
OV
VS12B
-
+
UN
V12A
-
V12A
IS5
+
+
-
VREF=1.2V
-
IREF*8
RI
+
VS5
OV
-
+
UN
-
Fig. 1 3513E
UNISONIC TECHNOLOGIES CO., LTD
4 of 11
QW-R502-129.B
www.unisonic.com.tw
3513
CMOS IC
BLOCK DIAGRAM(Cont.)
VDD
RST
PGO
+
300ms
delay
73μs/
debounce
PGI
UN
clr
-
Bandgap
Reference
VREF=1.2V
V12A
+
IS33
-
73μs
debounce
IREF*8
FPOB
R Q
S Q
VS33
+
OV
-
+
UN
-
Internal
Power
V12A
Power On Reset
PWR
VCCI=3.6V
+
IS12AB
VS12A
-
2.4ms
delay
IREF*8
38ms
debounce
PSONB
OTP/FC
+
OV
-
75ms/300ms
delay
2.4V~3.2V
+
-
UN
V12A
+
-
IREF*8
+
PWM
-
+
OV
-
VS12B
+
-
PWR
OSC
UN
V12A
CLK
+
IS5
-
IREF*8
V12A
+
VS5
OV
-
+
-
VREF=1.2V
+
-
UN
RI
Fig. 2 3513F
UNISONIC TECHNOLOGIES CO., LTD
5 of 11
QW-R502-129.B
www.unisonic.com.tw
3513
CMOS IC
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
RATINGS
-0.3 ~ 16
UNIT
V
Supply Voltage
Input Voltage
VDD
VS5,VS33
-0.3 ~ 7
V
VS12A, VS12B
-0.3 ~ 16
V
VIN
IS12A, IS12B, IS5, IS33
PSONB, PGI, OTP
FPOB
-0.3 ~ V12A+0.3
-0.3 ~ 7
V
V
-0.3 ~ VDD+0.3
-0.3 ~ VDD+0.3
-40 ~ +125
-55 ~ +150
V
Output Voltage
VOUT
PGO
V
Operating Temperature
Storage Temperature
TOPR
TSTG
℃
℃
Note 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Stress above those listed may cause permanent damage to the devices.
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
VDD
MIN
4
TYP
12
MAX
15
7
UNIT
V
Supply Voltage
Input Voltage
VS5,VS33
V
VS12A, VS12B
15
15
7
V
VIN
IS12A, IS12B, IS5, IS33
PSONB, PGI,OTP
FPOB
V
V
7
V
Output Voltage
VOUT
PGO
7
V
FPOB
30
10
65
mA
mA
uA
ms
Output Sink Current
RI Output Current
IO(SINK)
PGO
IO(RI)
tR
10
1
Supply Voltage Rising Time (VDD
)
ELECTRICAL CHARACTERISTICS (TA=25℃, VDD=5V, V12A=12V)
PARAMETER SYMBOL TEST CONDITIONS
MIN
TYP
MAX
UNIT
OVER VOLTAGE DETECTION
V
12A, V12B
13.2
5.7
13.8
5.95
3.9
14.4
6.2
4.1
0.3
0.7
5
V
V
V
Over Voltage Threshold
V5
V33
3.7
@ ISINK=10mA
Low Level Output Voltage (FPOB)
VOL
V
@ ISINK=30mA
@ V(FPOB)=5V
Output Leakage Current (FPOB)
PSONB
ILEAK
uA
High-Level Input Voltage
Low-Level Input Voltage
Input Pull-up Current
VIH
VIL
IIN
2
V
V
0.8
@ PSONB=0V
100
uA
UNISONIC TECHNOLOGIES CO., LTD
6 of 11
QW-R502-129.B
www.unisonic.com.tw
3513
CMOS IC
ELECTRICAL CHARACTERISTICS (Cont.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNIT
PGI AND PGO
V12A, V12B
V5
9.5
9.90
4.30
2.68
1.20
10.5
4.45
2.82
1.24
0.4
V
V
Under Voltage Threshold
4.15
2.54
1.16
V33
V
Input Threshold Voltage (PGI)
Low Level Output Voltage (PGO)
Output Leakage current (PGO)
OTP/FC
VI(THD)
VOL
V
@ ISINK=10mA
V
ILEAK
@ PGO=5V
5
uA
High-Level Input Voltage (OTP)
Low-Level Input Voltage (OTP)
Start-up Voltage (FC)
Stop Voltage (FC)
VIH
VIL
3513E/3513F
3.10
2.30
0.7
3.25
2.45
0.8
3.40
2.60
0.9
V
V
V
V
0.55
0.65
0.75
PWM
High Level Output Voltage
Low Level Output Voltage
Output Leakage Current
PWM Frequency
VOH
VOL
@ ISOURCE=4.5mA
@ ISINK=4.5mA
V12A-0.4
28
V
V
0.4
5
ILEAK
fPWM
μA
KHz
35
42
SWITCHING CHARACTERISTICS
PSONB ON
(PSONB Low to FPOB Low)
PSONB OFF
(PSONB Hi to PGO Low)
PGI to PGO Delay Time
Timing PGO Low to FPO high
T(PSONB ON) @ VDD=5V
T(PSONB OFF) @ VDD=5V
32
32
38
38
62
62
ms
ms
TPG
@ VDD=5V
200
2.0
65
300
2.4
75
490
4
ms
ms
ms
ms
μs
TPSOFF @ VDD=5V
TUVP1
TUVP2
tG1
@ FPOB=Low & PGI > 1.2V
@ FPOB=Low & PGI < 1.2V
122
488
120
120
UVD/OCD turn on delay Time
260
63
300
75
Noise Deglitch Time
Noise Deglitch Time for Latch
TOTAL DEVICE
tG2
63
75
μs
Low Voltage
VDD
IDD
3.6
V
Supply Current
@ PSONB=5V
1
mA
UNISONIC TECHNOLOGIES CO., LTD
7 of 11
QW-R502-129.B
www.unisonic.com.tw
3513
CMOS IC
APPLICATION CIRCUIT
5VSB
5V
3513E
3KΩ
100Ω
16
1
2
PGI
PGI
PGO
0.01μF
15
14
GND
VDD
10KΩ
3
4
VS5
FPOB
47Ω
300
13
12
PSONB
IS5
PSONB
IS5
VS33
IS33
+3.3V
0.01μF
5
6
OTP
OTP
RI
RI
11
IS33
7
8
10
9
12VB
12VA
IS12A
VS12B
VS12A
IS12A
IS12B
IS12B
UNISONIC TECHNOLOGIES CO., LTD
8 of 11
QW-R502-129.B
www.unisonic.com.tw
3513
CMOS IC
APPLICATION CIRCUIT(Cont.)
UNISONIC TECHNOLOGIES CO., LTD
9 of 11
QW-R502-129.B
www.unisonic.com.tw
3513
CMOS IC
TYPICAL TIMMING DIAGRAM
1) PGI (UNDER-VOLTAGE):
2) V33, V5, V12A, V12B (UNDER-VOLTAGE) or IS33, IS5, IS12A, IS12B (OVER-CURRENT):
UNISONIC TECHNOLOGIES CO., LTD
10 of 11
QW-R502-129.B
www.unisonic.com.tw
3513
CMOS IC
TYPICAL TIMMING DIAGRAM
3) V33, V5, V12A, V12B (OVER-VOLTAGE).
PSONB/OTP
tPSOFF
tPSOFF
tG2
FPOB
t(PSONB ON)
t(PSONB ON)
t(PSONB ON)
tPG1+tG1
tPG+tG1
t(PSONB OFF)
PGO
t(PSONB OFF)
V33/V5/V12
4) OTP/FC, PWM, FPOB:
(at VDD=5V, PSONB=0V, V12A, V12B =12V, V5=5V, V33=3.3V)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
11 of 11
QW-R502-129.B
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明