854916_15 [TRIQUINT]
140 MHz SAW Filter;型号: | 854916_15 |
厂家: | TRIQUINT SEMICONDUCTOR |
描述: | 140 MHz SAW Filter |
文件: | 总6页 (文件大小:411K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
854916
140 MHz SAW Filter
Applications
General Purpose
For IF applications
Product Features
Functional Block Diagram
Top view
Typical 3 dB bandwidth of 10.59 MHz
Low loss
10
1
9
2
8
3
7
4
High Attenuation
11
12
6
5
Single-ended operation
Ceramic Surface Mount Package (SMP)
Small Size
Dimensions: 13.30 x 6.50 x 1.75mm
Hermetic RoHS compliant, Pb-free
General Description
Pin Configuration
The 854916 is a high-performance IF SAW filter with a
center frequency of 70 MHz and a 3.0 dB bandwidth of
16.5 MHz.
Pin # SE
Description
Input
Output
11
5
12
6
1,4,7,10
2,3,8,9
Input Return
Output Return
Floating
It features low loss with excellent attenuation, and is
designed to be used with a single ended input and output.
Case Ground
The device is RoHS compliant and Pb-free.
Ordering Information
Part No.
854916
Description
packaged part
854916-EVB
evaluation board
Standard T/R size = 2000 units/reel.
Data Sheet: Rev C 03/06/12
- 1 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
854916
140 MHz SAW Filter
Specifications
Electrical Specifications (1)
Specified Temperature Range: (2) +25 ºC
Parameter (3)
Conditions
Min
Typical (4) Max Units
Center Frequency
136.9
140
8.3
140.4
MHz
dB
Insertion Loss
At Center Frequency
-
9.1
10
-
-
-
-
-
-
-
10
-
-
14
1.0
15
120
-
1 dB Bandwidth(5)
9.6
MHz
MHz
MHz
dB p-p
o p-p
ns p-p
µs
ppm/ ºC
3 dB Bandwidth(5)
10.59
13.9
0.4
9.0
50
35 dB Bandwidth(5)
Passband Ripple
136 – 144 MHz
136 – 144 MHz
136 – 144 MHz
136 – 144 MHz
Phase Linearity
Group Delay Variation
Absolute Delay Variation
Temperature Coefficient
Source Impedance single-ended (6)
Load Impedance single-ended (6)
1.062
-94
-
50
-
-
50
-
Notes:
1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3
2. All specifications are tested at room temperature only
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Typical values are based on average measurements at room temperature
5. Relative to Insertion loss at center frequency
6. This is the optimum impedance in order to achieve the performance shown
Absolute Maximum Ratings
Parameter
Rating
Operating Temperature (6)
Storage Temperature
-40 to +85 oC
-40 to +85 oC
Input Power (at +55 C for 10K hours max) +20dBm
7. Device may operate over this range with degraded Electrical Specifications
Operation of this device outside the parameter ranges given above may cause permanent damage.
Data Sheet: Rev C 03/06/12
- 2 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
854916
140 MHz SAW Filter
Reference Design – 50 SE Input, 50 SE Output
Schematic
56nH
33nH
11
5
50
50
Single-ended
Input
50
Single-ended
Output
50
1,2,3,4,6
7,8,9,10,12
Notes:
1. Actual matching values may vary due to PCB layout and parasitic
PC Board
Mounting Configuration
13.51
1.70
3.53
960685
SAWTEK
854916
JJJYHH
6.70
L1
L2
.99
.99
1.55
1.70
8.61
Notes:
Notes:
1. All dimensions are in millimeters.
Top, middle & bottom layers: 1 oz copper
Substrates: FR4 dielectric, .031” thick
Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick
Hole plating: Copper min .0008µm thick
2. This footprint represents a recommendation only.
3. This part includes a center pad. Soldering it to PCB is neither
recommended nor required.
Bill of Material
Reference Desg. Value Description
Manufacturer
Coilcraft
Coilcraft
Radiall USA Inc.
multiple
Part Number
0805CS-560XJBC
0805CS-330XJBC
9602-1111-018
960685
L1
56 H
33nH
N/A
Coil Wire-wound, 0805, 5%
Coil Wire-wound, 0805, 5%
SMA connector
L2
SMA
PCB
N/A
3-layer
Data Sheet: Rev C 03/06/12
- 3 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
854916
140 MHz SAW Filter
Typical Performance (at room temperature)
Data Sheet: Rev C 03/06/12
- 4 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
854916
140 MHz SAW Filter
Mechanical Information
Package Information, Dimensions and Marking
Package Style: SMP-53A
Dimensions: 13.30 x 6.50 x 1.75 mm
SAWTEK
854916
JJJYHH
Date Code
ID Dot
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni
plating
1.75 NOM.
1.96 MAX.
All dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall length and width
±0.10mm
0.76
The date code consists of: day of the current year (Julian,
3 digits), Y = last digit of the year (1 digit), and HH = hour
(2 digits)
13.3
2.54
2.18
6.50
2.54
1.50
1.17 x 3.76
0.79
Tape and Reel Information
Standard T/R size = 2000 units/reel. All dimensions are in millimeters
ID dot
24.8
Ø330
Section A-A
2.7
4.0
Ø1.5
0.3
A
1.75
11.5
2.0
Direction of travel
13.9
Ø102
24
Ø20.2
Ø13.0
2.0
2.3
12.0
A
7.1
Ø1.5
Data Sheet: Rev C 03/06/12
© 2012 TriQuint Semiconductor, Inc.
- 5 of 6 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network
854916
140 MHz SAW Filter
Product Compliance Information
ESD Information
Solderability
Compatible with the latest version of J-STD-020, lead
free solder, 260°C
Caution! ESD-Sensitive Device
Refer to Soldering Profile for recommended guidelines.
ESD Rating: 1C
Value:
Test:
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
Passes 1000 V min.
Human Body Model (HBM)
JEDEC Standard JESD22-A114
Standard:
This product also has the following attributes:
Halogen Free (Chlorine, Bromine)
Antimony Free
ESD Rating: C
Value:
Test:
Passes 400 V min.
Machine Model (MM)
Standard:
JEDEC Standard JESD22-A115
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
MSL Rating
Devices are Hermetic, therefore MSL is not applicable
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about
TriQuint:
Web: www.triquint.com
Email: info-sales@tqs.com
Tel:
Fax:
+1.407.886.8860
+1.407.886.7061
For technical questions and application information:
Email: flapplication.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain
herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint
assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained
herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with
the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest
relevant information before placing orders for TriQuint products. The information contained herein or any use of such
information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property
rights, whether with regard to such information itself or anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Data Sheet: Rev C 03/06/12
- 6 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
相关型号:
©2020 ICPDF网 联系我们和版权申明