TLPGV1034(T22 [TOSHIBA]
SINGLE COLOR LED, PURE GREEN, 1.6mm;
| 型号： | TLPGV1034(T22 |
| 厂家： | 
TOSHIBA |
| 描述： | SINGLE COLOR LED, PURE GREEN, 1.6mm 光电 |
| 文件： | 总21页 (文件大小：313K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
TOSHIBA LED Lamps
TLRV1034(T22, TLRMV1034(T22, TLSV1034(T22,
TLOV1034(T22, TLYV1034(T22, TLPYV1034(T22
TLGV1034(T22, TLFGV1034(T22, TLPGV1034(T22
Unit: mm
Panel Circuit Indicators
1.6 (L) mm × 0.8 (W) mm × 0.4 (H) mm
TL□V1034(T22) series
InGaAlP LEDs
Low drive current, high-intensity light emission
Color : red, orange, yellow, pure yellow, green, pure green
Transparent resin
Standard embossed tape packing : T22 (5000 pcs / reel)
Topr / Tstg = －40 to 100degC
Applications : backlighting, indicator, instrumental panel
backlighting in automotive equipment, etc.
Color and Material
1. Cathode
2. Anode
Tolerance: ±0.05
Part Number
Color
Material
JEDEC
―
―
TLRV1034
TLRMV1034
TLSV1034
TLOV1034
TLYV1034
TLPYV1034
TLGV1034
TLFGV1034
TLPGV1034
Red
Red
JEITA
TOSHIBA
4-1F1
Red
Weight: 0.001 g (typ.)
Orange
Yellow
InGaAℓP
Pure Yellow
Green
Green
Pure Green
2011-07-08
1
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
Absolute Maximum Ratings (Ta 25°C)
Storage
Operation
Temperature
DC Forward Current
Reverse Voltage
(V)
Power Dissipation
(mW)
I
(mA)
Temperature
Part Number
F
V
P
D
R
T
opr
(°C)
Please see Note 1
T
stg
(°C)
TLRV1034
TLRMV1034
TLSV1034
TLOV1034
TLYV1034
TLPYV1034
TLGV1034
TLFGV1034
TLPGV1034
31.5
15
5
40 to 100
40 to 100
34.5
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Forward current derating
I
– Ta
F
25
20
15
10
5
0
0
20
40
60
80
100
120
Ambient temperature Ta (°C)
Electrical Characteristics (Ta 25°C)
Forward Voltage
V
Reverse Current I
R
F
Part Number
Min
1.5
1.5
1.7
1.7
1.7
1.7
1.7
1.7
1.7
Typ.
1.8
1.8
2.0
2.0
2.0
2.0
2.0
2.0
2.0
V
Max
2.1
2.1
2.3
2.3
2.3
2.3
2.3
2.3
2.3
I
Max
V
R
F
TLRV1034
TLRMV1034
TLSV1034
TLOV1034
TLYV1034
TLPYV1034
TLGV1034
TLFGV1034
TLPGV1034
Unit
5
10
5
mA
A
V
2011-07-08
2
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
Optical Characteristics–1 (Ta 25°C)
Luminous Intensity I
Available I rank
V
V
Part Number
Please see Note 2
(JA / KA / LA / MA / NA)
(JA / KA / LA / MA / NA)
(LA / MA / NA / PA)
(LA / MA / NA / PA)
(LA / MA / NA / PA)
(LA / MA / NA / PA)
(JA / KA / LA / MA / NA)
(HA / JA / KA / LA)
(GA / HA / JA / KA)
Min
4
Typ.
15
Max
50
I
F
TLRV1034
TLRMV1034
TLSV1034
TLOV1034
TLYV1034
TLPYV1034
TLGV1034
TLFGV1034
TLPGV1034
Unit
50
4
20
80
10
10
10
10
4
30
80
38
5
80
25
80
23
50
14
20
2.5
1.6
8
12.5
3.5
mcd
mA
Note 2 : The specification on the following table is used for Iv classification of LEDs in Toshiba facility.
Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Luminous Intensity I
Min
V
Rank
Max
GA
HA
JA
1.6
2.5
4.0
6.3
10
3.2
5.0
8.0
12.5
20
KA
LA
MA
NA
PA
Unit
16
32
25
50
40
80
mcd
Optical Characteristics–2 (Ta 25°C)
Emission Spectrum
Peak Emission
Part Number
Dominant Wavelength
d
Wavelength
I
p
F
Min
Typ.
Max
Typ.
18
Min
624
Typ.
630
Max
638
TLRV1034
TLRMV1034
TLSV1034
TLOV1034
TLYV1034
TLPYV1034
TLGV1034
TLFGV1034
TLPGV1034
Unit
644
636
623
612
590
583
574
568
562
nm
17
17
15
13
13
11
11
11
nm
620
607
599
581
574
565
559
555
626
613
605
587
580
571
565
561
nm
634
621
613
595
586
576
571
566
5
mA
2011-07-08
3
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
Cautions
This visible LED lamp also emits some IR light.
If a photodetector is located near the LED lamp, please ensure that it will not be affected by the IR light.
This product is designed as a general display light source usage, and it has applied the measurement standard
that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional
application (ex. Light source for sensor, optical communication and etc) except general display light source.
If a voltage is applied in a high humidity environment, migration of electrode metal may occur and,
consequently, there may be a short circuit of interelectrode metal.
Since such metal migration is particularly likely to occur if a reverse voltage is applied in conditions in which
condensation occurs, please take preventive measures by providing a moisture-proof design, drive circuit design,
etc. for customer products into which this product will be integrated.
2011-07-08
4
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
TLRV1034
I
– V
I
– I
F
F
F
V
100
100
Ta 25°C
Ta 25°C
50
30
50
30
10
10
5
3
5
3
1
1.4
1.6
1.8
2.0
2.2
2.4
1
1
Forward voltage
V
(V)
F
3
5
10
30
50
100
Forward current
I
(mA)
F
Wavelength characteristic
I
– Tc
V
10
1.0
0.8
0.6
0.4
0.2
0
I
5 mA
F
Ta 25°C
5
3
1
0.5
0.3
0.1
40
20
0
20
40
60
80
100
580
600
620
640
660
680
700
Case temperature Tc (°C)
Wavelength
(nm)
2011-07-08
5
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
TLRMV1034
I
– V
I
– I
F
F
F
V
100
100
Ta 25°C
Ta 25°C
50
30
50
30
10
10
5
3
5
3
1
1.4
1.6
1.8
2.0
2.2
2.4
1
1
3
5
10
30
50
100
Forward voltage
V
(V)
F
Forward current
I
(mA)
F
I
– Tc
Wavelength characteristic
V
10
1.0
0.8
0.6
0.4
0.2
0
I
5 mA
F
Ta 25°C
5
3
1
0.5
0.3
0.1
40
20
0
20
40
60
80
100
580
600
620
640
660
680
700
Case temperature Tc (°C)
Wavelength
(nm)
2011-07-08
6
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
TLSV1034
I
– V
I
– I
F
F
F
V
100
100
Ta 25°C
Ta 25°C
50
30
50
30
10
10
5
3
5
3
1
1.6
1.8
2.0
2.2
2.4
2.6
1
1
Forward voltage
V
(V)
3
5
10
30
50
100
F
Forward current
I
(mA)
F
I
– Tc
Wavelength characteristic
V
10
1.0
0.8
I
5 mA
F
Ta 25°C
5
3
0.6
0.4
1
0.5
0.3
0.2
0.1
40
0
580
20
0
20
40
60
80
100
600
620
640
660
680
700
Case temperature Tc (°C)
Wavelength
(nm)
2011-07-08
7
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
TLOV1034
I
– V
I
– I
F
F
F
V
100
300
100
Ta 25°C
Ta 25°C
50
30
50
30
10
5
3
10
5
3
1
1.6
1.8
2.0
2.2
2.4
2.6
Forward voltage
V
(V)
F
1
3
5
10
30
50
100
Forward current
I
(mA)
F
I
– Tc
Wavelength characteristic
V
10
1.0
0.8
0.6
0.4
0.2
0
I
5 mA
F
Ta 25°C
5
3
1
0.5
0.3
0.1
40
20
0
20
40
60
80
100
540
560
580
600
620
640
660
Case temperature Tc (°C)
Wavelength
(nm)
2011-07-08
8
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
TLYV1034
I
– V
I
– I
F
F
F
V
100
100
Ta 25°C
Ta 25°C
50
30
50
30
10
10
5
3
5
3
1
1.6
1.8
2.0
2.2
2.4
2.6
1
Forward voltage
V
(V)
F
1
3
5
10
30
50
100
Forward current
I
(mA)
F
I
– Tc
V
Wavelength characteristic
10
1.0
0.8
0.6
0.4
0.2
0
I
5 mA
F
Ta 25°C
5
3
1
0.5
0.3
0.1
40
20
0
20
40
60
80
100
540
560
580
600
620
640
660
Case temperature Tc (°C)
Wavelength
(nm)
2011-07-08
9
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
TLPYV1034
I
– V
I – I
V F
F
F
300
100
100
Ta 25°C
Ta 25°C
50
30
30
10
10
5
3
5
3
1
1
3
5
10
30
50
100
1.7
1.8
1.9
2.0
2.1
2.2
2.3
Forward voltage
V
(V)
Forward current
I
(mA)
F
F
I
– Tc
Wavelength characteristic
V
10
1.0
0.8
0.6
0.4
0.2
I
5 mA
F
Ta 25°C
5
3
1
0.5
0.3
0.1
0
540
20
0
20
40
60
80
100
560
580
600
620
640
660
Case temperature Tc (°C)
Wavelength
(nm)
2011-07-08
10
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
TLGV1034
I
– V
I
– I
F
F
F
V
100
100
Ta 25°C
Ta 25°C
50
30
50
30
10
10
5
3
5
3
1
1.7
1.8
1.9
2.0
2.1
2.2
2.3
1
Forward voltage
V
(V)
F
1
3
5
10
30
50
100
Forward current
I
(mA)
F
I
– Tc
Wavelength characteristic
V
10
1.0
0.8
0.6
0.4
0.2
0
I
5 mA
F
Ta 25°C
5
3
1
0.5
0.3
0.1
40
20
0
20
40
60
80
100
540
560
580
600
620
Case temperature Tc (°C)
Wavelength
(nm)
2011-07-08
11
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
TLFGV1034
I
V
– I
F
I
– V
F
F
100
30
10
Ta 25°C
Ta 25°C
50
30
10
5
3
5
3
1
1.7
1
1
3
5
10
30
50
100
1.8
1.9
2.0
2.1
2.2
2.3
Forward current
I
(mA)
F
Forward voltage
V
(V)
F
I
– Tc
Wavelength characteristic
V
10
1.0
I
5 mA
F
Ta 25°C
5
3
0.8
0.6
0.4
0.2
0
1
0.5
0.3
0.1
20
0
20
40
60
80
100
520
540
560
580
600
Case temperature Tc (°C)
Wavelength
(nm)
2011-07-08
12
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
TLPGV1034
I
– V
I
– I
F
F
F
V
100
30
10
Ta 25°C
Ta 25°C
50
30
10
5
3
5
3
1
1.7
1
1
1.8
1.9
2.0
2.1
2.2
2.3
3
5
10
30
50
100
Forward voltage
V
(V)
Forward current
I
(mA)
F
F
I
– Tc
Wavelength characteristic
V
10
1.0
0.8
0.6
0.4
0.2
0
I
5 mA
F
Ta 25°C
5
3
1
0.5
0.3
0.1
40
20
0
20
40
60
80
100
520
540
560
580
600
Case temperature Tc (°C)
Wavelength
(nm)
2011-07-08
13
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
Radiation Pattern
Vertical to polarity
Horizontal to polarity
0
0
10
10
10
10
20
20
20
20
30
30
30
30
40
40
40
40
50
50
50
60
70
50
60
70
60
70
80
90
60
70
80
90
80
80
90°
0.2 0.4 0.6 0.8 1.0
90°
0.2 0.4 0.6 0.8 1.0
0
0
2011-07-08
14
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
Packaging
These LED devices are packed in an aluminum envelope with a silica gel and a moisture indicator to avoid
moisture absorption. The optical characteristics of the devices may be affected by exposure to moisture in the air
before soldering and they should therefore be stored under the following conditions:
1. This moisture proof bag may be stored unopened within 12 months at the following conditions.
Temperature: 5C to 30C
Humidity: 90% (max)
2. After opening the moisture proof bag, the devices should be assembled within 168 hours in an environment of
5°C to 30°C/60% RH or below.
3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to
pink) or the expiration date has passed, the devices should be baked in taping with reel.
After baking, use the baked devices within 72 hours, but perform baking only once.
Baking conditions: 605°C, for 12 to 24 hours.
Expiration date: 12 months from sealing date, which is imprinted on the same side as this label affixed.
4. Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting.
Furthermore, prevent the devices from being destructed against static electricity for baking of it.
5. If the packing material of laminate would be broken, the hermeticity would deteriorate. Therefore, do not
throw or drop the packed devices.
Attention of mounting method
Please note the handling of products during evaluation.
1. Please do not apply pressure to the upper surface of the product with fingers, tweezers, and others. Failure of
product to light up may occur due to package deformation, wire deformation and/or disconnection.
2. Please handle the product lengthwise.
3. Should tweezers be used in product handling, one with flat surfaces is recommended.
4. Please do not drop the product. There is a possibility for package transformation etc. to occur when the
product is dropped.
5. Please do not stack the Printed Circuit Boards on which the product is mounted to prevent damages to
product surface. Also, please note not to damage the surface of the product with cushioning material etc.
Surface damage to the product may influence their optical characteristics.
2011-07-08
15
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
Mounting Method
Soldering
Reflow soldering
Temperature profile for Pb soldering (example)
Temperature profile for Pb-free soldering (example)
(*)
(*)
10 s max
5 s max
(*)
(*)
240C max
260C max
(*)
4C/s max
max(*)
max(*)
140 to 160C
230C
150 to 180C
(*)
(*)
4C/s max
4C/s max
(*)
4C/s max
max(*)
60 to 120 s
max(*)
60 to 120 s
30 to 50 s max(*)
Time (s)
Time (s)
The products are evaluated using above reflow soldering conditions. No additional test is performed exceed the
condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under
the above conditions.
Please perform the first reflow soldering with reference to the above temperature profile and within 168 h of
opening the package.
Second reflow soldering
In case of second reflow soldering should be performed within 168 h of the first reflow under the above
conditions.
Storage conditions before the second reflow soldering: 30C, 60% RH (max)
Do not perform wave soldering.
Land Pattern dimensions for reference only
Unit: mm
1.7
0.8
Cathode
Anode
0.6
0.8
Please be sure to check solderability.
2011-07-08
16
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents.
It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the
recommended conditions). In selecting the one for your actual usage, please perform sufficient review
on washing condition, using condition and etc.
ASAHI CLEAN AK-225AES:
KAO CLEAN THROUGH 750H:
PINE ALPHA ST-100S:
(made by ASAHI GLASS)
(made by KAO)
(made by ARAKAWA CHEMICAL)
Precautions When Mounting
Do not apply force to the plastic part of the LED under high-temperature conditions.
To avoid damaging the LED plastic, do not apply friction using a hard material.
When installing the PCB in a product, ensure that the device does not come into contact with other components.
2011-07-08
17
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
Tape Specifications
1. Product Number Format
The type of package used for shipment is denoted by a symbol suffix after the product number.
The method of classification is as below. (this method, however does not apply to products whose
electrical characteristics differ from standard Toshiba specifications)
(1) Tape Type: T22 (4-mm pitch)
(2) Example
TLRV1034 (T22
Tape type
Toshiba product No.
2. Tape Dimensions
Unit: mm
Item
Symbol
W
Value
Tolerance
Item
Symbol
Value
Tolerance
Width
8.0
0.2
0.2
0.05
0.1/-0
Length
Width
Depth
B
A
1.85
0.95
0.55
0.05
0.05
0.05
Carrier tape
Feed hole
Thickness
Diameter
t
1
Cavity
D
1.50
t
2
0
0
Diameter of
mark hole
Pitch
P
4.0
1.75
4.0
0.1
0.1
0.1
D
0.5
0.1
1
Position
E
Vertical
P
P
1
2
Direction(1)
Distance
from center
Line
Vertical
2.0
3.5
0.05
0.05
Direction(2)
Horizontal
Direction(1)
F
D
0
P
t
1
0
Y
Y
E
P
2
F
D
1
X
X’
W
B
P
Polarity
1
Y’
t
2
Y’
X
X’
A
2011-07-08
18
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
3. Reel Dimensions
Unit: mm
9
11.4 1.0
44
2 0.5
4. Leader and Trailer Sections of Tape
40 mm or more
(Note 1)
40 mm or more
(Note 2)
Leading part: 190 mm (min)
Note 1: Empty trailer section
Note 2: Empty leader section
2011-07-08
19
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
5. Packing Display
(1) Packing quantity
Reel
5,000 pcs
Carton
25,000 pcs
(2) Packing form: Each reel is sealed in an aluminum pack with silica gel.
6. Label Format
(1) Example: TLRV1034 (T22(J
P/N:
C/N:
TOSHIBA
TYPE
ADDC
TLRV1034(T22
(J
（Note 3）
Q’TY
5,000 pcs
Lot
NOTE
xxxxxxx
KEY NO xxxxxxxx
TLCxxx
Use under 5-30degC/60%RH within 168h
[[G]]/RoHS COMPATIBLE
Y380xxxxxxxxxxxxxxxxxx
SEALED *****
DIFFUSED IN *****
ASSEMBLED ******
Note ３
(O ： IN-IN ＜Made in Japan＞
(J ： OUT-IN ＜To Japan＞
(T ： OUT-OUT ＜To Overseas out of Japan＞
(2) Label location
Reel
Carton
Tape feel direction
Label position
Label position
The aluminum package in which the reel is supplied also has the label attached to
center of one side.
2011-07-08
20
TL(R,RM,S,O,Y,PY,G,FG,PG)V1034(T22
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
2011-07-08
21
相关型号：
©2020 ICPDF网 联系我们和版权申明