TLP719F [TOSHIBA]
Digital logic ground isolation; 数字逻辑接地隔离
| 型号： | TLP719F |
| 厂家： | 
TOSHIBA |
| 描述： | Digital logic ground isolation |
| 文件： | 总2页 (文件大小：127K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLP719F
TOSHIBA PHOTOCOUPLER GaAℓAs IRED + PHOTO−IC
TLP719F
Unit in mm
Digital logic ground isolation
4.58±0.25
6 5 4
Line receivers
Microprocessor system interfaces
Switching power supply feedback control
Transistor invertors
The TOSHIBA TLP719F consists of a GaAℓAs high-output light-emitting diode
and a high-speed detector.
1
2 3
This unit is a 6-lead SDIP. The TLP719F is 50% smaller than the 8-pin DIP
and meets the reinforced insulation class requirements of international safety
standards. Therefore the mounting area can be reduced in equipment
requiring safety standard certification.
7.62±0.25
The TLP719F has a Faraday shield integrated on the photodetector chip to
provide an effective common mode noise transient immunity. Therefore this
product is suitable for application in noisy environmental conditions.
Absolute maximum ratings and electrical characteristics are the same as the
TLP719 technical data sheets.
1.27±0.2
0.4±0.1
0.75±0.25
11.7±0.3
11-5J101
TOSHIBA
11-5J101
Weight：0.26 g (typ.)
•
•
•
Open collector
Package type
Isolation voltage
: SDIP6
: 5000 Vrms (min)
•
•
Common mode transient immunity
Switching speed
: ±10 kV/us(min) @VCM = 400 V
: tpHL/ tpLH = 0.8 μs (max)
@ IF = 16 mA , VCC
RL = 1.9 kΩ , Ta = 25 °C
•
•
TTL compatible
Construction mechanical rating
Creepage Distance
Clearance
Insulation Thickness
8.0 mm (min)
8.0 mm (min)
0.4 mm (min)
Pin Configuration (top view)
1: ANODE
2: N.C.
1
6
•
•
UL recognized
: UL1577, File No. E67349
3: CATHODE
5
4
Option (D4)
TÜV approved
2
3
4: EMITTER (GND)
5: COLLECTOR (OUTPUT)
: EN60747-5-2
Certificate No. R50033433
6: V
CC
SHIELD
Maximum operating insulation voltage : 1140 Vpk
Highest permissible over voltage : 8000 Vpk
( Note ) When an EN60747-5-2 approved type is needed,
please designate the “Option(D4)”
Schematic
IF
ICC
IO
1
VCC
6
VO
VF
3
5
GND
4
SHIELD
A 0.1-μF bypass capacitor must be
connected between pins 4 and 6.
(See Note 7.)
1
2007-10-01
TLP719F
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
2
2007-10-01
相关型号：
TLP721(D4)
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
TLP721(D4-GB)
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
TLP721(D4-GB-LF1)
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
TLP721(D4-GB-LF4)
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
TLP721(D4-GB-LF5)
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
TLP721(D4-GB-TP1)
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
TLP721(D4-GB-TP5)
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
TLP721(D4-GR)
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
©2020 ICPDF网 联系我们和版权申明