TLP251F_07 [TOSHIBA]

GaAГAs Ired & Photo−IC; GaAГAs红外发光二极管和光电IC
TLP251F_07
型号: TLP251F_07
厂家: TOSHIBA    TOSHIBA
描述:

GaAГAs Ired & Photo−IC
GaAГAs红外发光二极管和光电IC

光电 二极管
文件: 总3页 (文件大小:154K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TLP251F  
TOSHIBA Photocoupler GaAAs Ired & PhotoIC  
TLP251F  
Inverter for Air Conditioner  
Unit in mm  
Induction Heating  
Transistor Inverter  
Power MOSFET Gate Drive  
IGBT Gate Drive  
The TOSHIBA TLP251F consists of a GaAAs light emitting diode and  
an integrated photodetector.  
This unit is 8lead DIP package.  
TLP251F is suitable for gate driving circuit of IGBT or power MOS FET.  
Especially TLP251 is capable of “direct” gate drive of lower power IGBTs.  
(~15A)  
Input threshold current: I = 5mA (max.)  
F
Supply current: 11mA (max.)  
Supply voltage: 10~35V  
TOSHIBA  
1110C402  
Weight: 0.54g  
Output peak current: ±0.4A (max.)  
Switching time: t  
, t  
= 1μs (max.)  
pHL pLH  
Isolation voltage: 2500V  
(min.)  
rms  
UL recognized: UL1577, file no. E67349  
Option (D4) type  
VDE approved: DIN EN 60747-5-2, certificate no. 40011913  
Maximum operating insulation voltage: 1140V  
PK  
Highest permissible over voltage: 6000V  
PK  
(Note 1) When a EN 60747-5-2 approved type is needed,  
please designate the “ Option (D4) ”  
Structural parameter  
Creepage distance: 8.0mm (min.)  
Clearance: 8.0mm (min.)  
1
2007-10-01  
TLP251F  
Truth Table  
Tr1  
Tr2  
On  
Off  
On  
Off  
Off  
On  
Input  
LED  
Pin Configuration (top view)  
Schematic  
I
CC  
8
V
1
CC  
1: N.C.  
8
2: Anode  
3: Cathode  
4: N.C.  
I
7
F
2
(Tr 1)  
6
2
5: GND  
6
5
3
4
V
F
6: V (output)  
O
3
7: N.C.  
V
O
8: V  
CC  
I
O
(Tr 2)  
GND  
5
(Note 2 ) A 0.1μF bypass capacitor must be connected between pin 8 and 5.  
2
2007-10-01  
TLP251F  
RESTRICTIONS ON PRODUCT USE  
20070701-EN  
The information contained herein is subject to change without notice.  
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor  
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical  
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of  
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of  
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.  
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as  
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and  
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability  
Handbook” etc.  
The TOSHIBA products listed in this document are intended for usage in general electronics applications  
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,  
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires  
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or  
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or  
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,  
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his  
document shall be made at the customer’s own risk.  
The products described in this document shall not be used or embedded to any downstream products of which  
manufacture, use and/or sale are prohibited under any applicable laws and regulations.  
The information contained herein is presented only as a guide for the applications of our products. No  
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which  
may result from its use. No license is granted by implication or otherwise under any patents or other rights of  
TOSHIBA or the third parties.  
GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,  
cut, crush or dissolve chemically.  
Please contact your sales representative for product-by-product details in this document regarding RoHS  
compatibility. Please use these products in this document in compliance with all applicable laws and regulations  
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses  
occurring as a result of noncompliance with applicable laws and regulations.  
3
2007-10-01  

相关型号:

TLP251_07

GaAГAs Ired & Photo-IC
TOSHIBA

TLP2530

TOSHIBA Photocoupler GaAГAs Ired & Photo IC
TOSHIBA

TLP2530(LF1)

Optocoupler - IC Output, 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 1 Mbps, DIP-8
TOSHIBA

TLP2530(LF2)

Optocoupler - IC Output, 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 1 Mbps, DIP-8
TOSHIBA

TLP2530(LF4)

Optocoupler - IC Output, 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 1 Mbps, DIP-8
TOSHIBA

TLP2530(LF5)

Optocoupler - IC Output, 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 1 Mbps, DIP-8
TOSHIBA

TLP2530(TP1)

Optocoupler - IC Output, 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 1 Mbps, DIP-8
TOSHIBA

TLP2530(TP5)

Optocoupler - IC Output, 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 1 Mbps, DIP-8
TOSHIBA

TLP2530_07

Digital Logic Isolation
TOSHIBA

TLP2531

TOSHIBA Photocoupler GaALAs Ired & Photo IC
TOSHIBA

TLP2531(LF1)

Optocoupler - IC Output, 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, DIP-8
TOSHIBA

TLP2531(LF1,F)

Optocoupler - IC Output, 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, LEAD FREE, DIP-8
TOSHIBA