TLP190B(F) [TOSHIBA]

Optoelectronic Device:Other, SPECIALTY OPTOELECTRONIC DEVICE, 11-4C1, MINIFLAT-4;
TLP190B(F)
型号: TLP190B(F)
厂家: TOSHIBA    TOSHIBA
描述:

Optoelectronic Device:Other, SPECIALTY OPTOELECTRONIC DEVICE, 11-4C1, MINIFLAT-4

光电
文件: 总6页 (文件大小:147K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TLP190B  
TOSHIBA Photocoupler GaAAs Ired & PhotoDiode Array  
TLP190B  
Telecommunications  
Unit: mm  
Programmable Controllers  
MOS Gate Drivers  
MOSFET Gate Drivers  
The TOSHIBA TLP190B mini-flat photocoupler is suitable for  
surface-mount assembly.  
The TLP190B consists of a GaAAs light emitting diode optically coupled  
to a series connected photodiode array which is suitable for MOSFET  
gate drivers.  
Open voltage: 7.0V (min)  
Short current: 12.0 μA (min)  
Isolation voltage: 2500 Vrms (min)  
UL recognized: UL1577, file no. E67349  
TOSHIBA  
114C1  
Weight: 0.09 g (typ.)  
Short Current  
Short Current  
Type  
Name  
Marking Of  
Classification  
Classification  
(min)  
I
F
Pin Configuration (top view)  
C20  
20 μA  
12 μA  
20  
TLP190B  
10 mA  
Standard  
20, blank  
6
1
Note: Application type name for certification test, please  
use standard product type name, i.e.  
3
4
TLP190B(C20) : TLP190B  
1. Anode  
3. Cathode  
4. Cathode  
6. Anode  
1
2008-04-25  
TLP190B  
Absolute Maximum Ratings (Ta = 25°C)  
Characteristic  
Symbol  
Rating  
50  
Unit  
mA  
Forward current  
I
F
Forward current  
derating (Ta 25°C)  
ΔI / °C  
F
0.5  
mA / °C  
LED  
Pulse forward current  
(100μs pulse 100pps)  
I
1
A
FP  
Reverse voltage  
V
3
125  
V
R
Junction temperature  
Forward current  
T
°C  
μA  
V
j
I
50  
FD  
Detector  
Reverse voltage  
V
10  
RD  
Junction temperature  
T
125  
°C  
°C  
°C  
°C  
j
Storage temperature range  
T
55 to 125  
40 to 85  
260  
stg  
opr  
Operating temperature range  
Lead soldering temperature (10 s)  
T
T
sol  
BV  
Isolation voltage  
(AC, 1 min., R.H. 60%)  
2500  
Vrms  
S
Note 1  
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the  
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even  
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum  
ratings.  
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook  
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test  
report and estimated failure rate, etc).  
Note 1: Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together.  
Recommended Operating Conditions  
Characteristic  
Symbol  
Min  
Typ.  
Max  
Unit  
Forward current  
Operating temperature  
I
20  
25  
85  
mA  
°C  
F
T
opr  
25  
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the  
device. Additionally, each item is an independent guideline respectively. In developing designs using this  
product, please confirm specified characteristics shown in this document.  
2
2008-04-25  
TLP190B  
Individual Electrical Characteristics (Ta = 25°C)  
Characteristic  
Symbol  
Test Condition  
= 10 mA  
F
Min  
Typ.  
Max  
Unit  
Forward voltage  
Reverse current  
Capacitance  
V
I
1.2  
1.4  
30  
7
1.7  
10  
60  
V
μA  
pF  
V
F
I
V = 3 V  
R
R
LED  
C
V = 0, f = 1 MHz  
= 10 μA  
T
Forward voltage  
Reverse current  
V
I
C
FD  
RD  
I
V
= 10 V  
1
nA  
R
Detector  
Capacitance  
(anode to cathode)  
C
TD  
V = 0, f = 1 MHz  
pF  
Coupled Electrical Characteristics (Ta = 25°C)  
Characteristic  
Symbol  
Test Condition  
Min  
Typ.  
Max  
Unit  
Open voltage  
Short current  
V
I
I
= 10 mA  
= 10 mA  
7
8
V
OC  
F
F
I
12  
20  
μA  
SC  
Isolation Characteristics (Ta = 25°C)  
Characteristic  
Symbol  
Test Condition  
Min  
Typ.  
Max  
Unit  
Capacitance input to output  
Isolation resistance  
C
R
V
V
= 0, f = 1 MHz  
5×1010  
2500  
0.8  
1014  
pF  
S
S
S
S
= 500 V, R.H. 60%  
AC, 1 minute  
Vrms  
Vdc  
Isolation voltage  
BV  
S
AC, 1 second in oil  
DC, 1 minute in oil  
5000  
5000  
Switching Characteristics (Ta = 25°C)  
Characteristic  
Symbol  
Test Condition  
Min  
Typ.  
Max  
Unit  
Turnon time  
Turnoff time  
t
0.2  
1
ms  
ms  
ON  
I
= 20 mA, R  
SH  
L
= 510 kΩ  
F
C = 1000pF  
(Fig. 1)  
t
OFF  
Fig. 1 Switching time test circuit  
I
V
F
OUT  
I
F
C
L
R
SH  
V
5V  
OUT  
1V  
0V  
t
t
ON  
OFF  
R
SH :  
External shunt resistance  
3
2008-04-25  
TLP190B  
I
F
Ta  
ΔV /ΔTa – I  
F
F
100  
4.0  
3.6  
3.2  
2.8  
80  
60  
40  
2.4  
2.0  
1.6  
1.2  
0.8  
20  
0
1
20  
60  
0.1  
0.3  
0.5  
3
30  
10  
0
40  
80  
100  
20  
Ambient temperature Ta (°C)  
Forward current  
I
(mA)  
F
I
– V  
I
– D  
R
F
F
FP  
100  
5000  
3000  
Pulse width 100μs  
Ta = 25 °C  
Ta = 25 °C  
50  
30  
1000  
500  
300  
10  
100  
5
3
50  
30  
10  
1
1.0  
3
2
1
1.6  
1.8  
1.4  
2.0  
2.2  
1.2  
0.0003 10  
0.003  
10  
0.03  
10  
0.3  
1
Forward voltage  
V
F
(V)  
Duty cycle ratio  
D
R
4
2008-04-25  
TLP190B  
t
t
– C  
I
O
– V  
O
ON, OFF L  
100  
Ta = 25 °C  
R
=2.4MΩ  
SH  
t
t
OFF  
ON  
40  
20  
30  
10  
1MΩ  
510kΩ  
300kΩ  
Ta = 25 °C  
I
= 20 mA  
F
3
1
I
=0mA  
F
I
=20mA  
F
V
0
OUT  
5mA  
R
SH  
C
L
10mA  
0.3  
0.1  
20  
I
F
15mA  
20mA  
300kΩ  
510kΩ  
1MΩ  
V
4
OUT  
0V  
5V  
40  
60  
1V  
0.03  
0.01  
25mA  
2.4MΩ  
t
t
OFF  
ON  
2
3
0
6
10  
2
8
4
10  
300  
10  
3000 10  
Load capacitance  
C
L
( F)  
P
Output voltage  
V
O
(V)  
V
– I  
F
I
– I  
F
OC  
SC  
10  
100  
R
SH  
OPEN  
50  
30  
8
6
4
1MΩ  
10  
510kΩ  
3
1
300kΩ  
0.5  
0.3  
2
0
Ta = 25 °C  
Ta = 25 °C  
R
=2.4MΩ  
SH  
0.1  
1
1
100  
3
5
10  
30  
50  
100  
3
5
10  
30  
50  
Forward current  
I
(mA)  
Forward current  
I
(mA)  
F
F
V
Ta  
I
Ta  
SC  
OC  
12  
10  
8
24  
20  
16  
6
4
12  
8
2
0
4
0
I
= 10mA  
I = 10mA  
F
F
20  
40  
120  
20  
40  
120  
20  
60  
80  
100  
20  
60  
80  
100  
0
0
Ambient temperature Ta (°C)  
Ambient temperature Ta (°C)  
5
2008-04-25  
TLP190B  
RESTRICTIONS ON PRODUCT USE  
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information  
in this document, and related hardware, software and systems (collectively “Product”) without notice.  
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with  
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.  
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are  
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and  
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily  
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must  
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,  
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA  
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are  
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the  
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any  
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other  
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO  
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.  
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring  
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.  
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or  
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious  
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used  
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling  
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric  
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this  
document.  
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.  
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any  
applicable laws or regulations.  
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any  
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to  
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.  
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE  
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY  
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR  
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND  
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO  
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.  
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or  
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.  
Do not use or otherwise make available Product or related software or technology for any military purposes, including without  
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile  
technology products (mass destruction weapons). Product and related software and technology may be controlled under the  
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product  
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.  
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.  
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,  
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of  
noncompliance with applicable laws and regulations.  
6
2008-04-25  

相关型号:

TLP190B(TPL)

暂无描述
TOSHIBA

TLP190B(TPL,F)

PHOTODIODE-OUTPUT OPTOCOUPLER,1-CHANNEL,2.5KV ISOLATION,SO
TOSHIBA

TLP190B(TPR)

PHOTOVOLTAIC COUPLER 4-MFSOP
TOSHIBA

TLP190B(TPR,U,C,F)

PHOTOVOLTAIC COUPLER 4-MFSOP
TOSHIBA

TLP190B(U,C,F)

Optoelectronic Device:Other, SPECIALTY OPTOELECTRONIC DEVICE, 11-4C1, MINIFLAT-6/4
TOSHIBA

TLP190B_07

Photocoupler GaAГAs Ired & Photo−Diode Array
TOSHIBA

TLP191

Optoelectronic Device:Other, SPECIALTY OPTOELECTRONIC DEVICE
TOSHIBA

TLP191(L)

暂无描述
TOSHIBA

TLP191(R)

Optoelectronic Device:Other, SPECIALTY OPTOELECTRONIC DEVICE
TOSHIBA

TLP191B

TOSHIBA Photocoupler GaAГAs Ired & Photo-Diode Array
TOSHIBA

TLP191B(F)

PHOTODIODE-OUTPUT OPTOCOUPLER,1-CHANNEL,2.5KV ISOLATION,SO
TOSHIBA

TLP191B(TPL,F)

PHOTODIODE-OUTPUT OPTOCOUPLER,1-CHANNEL,2.5KV ISOLATION,SO
TOSHIBA