SSM6P25TU(5LOMII,F [TOSHIBA]
Small Signal Field-Effect Transistor, 0.5A I(D), 20V, 2-Element, P-Channel, Silicon, Metal-Oxide Semiconductor FET;型号: | SSM6P25TU(5LOMII,F |
厂家: | TOSHIBA |
描述: | Small Signal Field-Effect Transistor, 0.5A I(D), 20V, 2-Element, P-Channel, Silicon, Metal-Oxide Semiconductor FET 开关 光电二极管 晶体管 |
文件: | 总6页 (文件大小:186K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SSM6P25TU
TOSHIBA Field Effect Transistor Silicon P Channel MOS Type (U-MOSIII)
SSM6P25TU
High Speed Switching Applications
Unit: mm
•
Optimum for high-density mounting in small packages
•
Low on-resistance:
R
= 260mΩ (max) (@V
= 430mΩ (max) (@V
= -4 V)
on
on
GS
GS
2.1±0.1
1.7±0.1
R
= -2.5 V)
Absolute Maximum Ratings (Ta = 25°C)
(Q1, Q2 Common)
1
2
6
5
Characteristics
Drain-Source voltage
Symbol
Rating
Unit
4
3
V
-20
± 12
-0.5
-1.5
V
V
DS
Gate-Source voltage
V
GSS
DC
I
D
Drain current
A
Pulse
I
DP
P
D
Drain power dissipation
Channel temperature
500
mW
1.Source1 4.Source2
(Note 1)
2.Gate1
3.Drain2
5.Gate2
6.Drain1
T
ch
150
°C
°C
Storage temperature range
T
stg
−55 to 150
UF6
Note: Using continuously under heavy loads (e.g. the application of
high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
JEDEC
JEITA
―
―
TOSHIBA
2-2T1B
Weight: 7.0 mg (typ.)
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and
estimated failure rate, etc).
Note 1: Mounted on FR4 board. (total dissipation)
(25.4 mm × 25.4 mm × 1.6 t, Cu Pad: 645 mm2 )
Marking
Equivalent Circuit (top view)
6
5
4
6
5
4
Q1
Q2
1
2
3
1
2
3
Handling Precaution
When handling individual devices (which are not yet mounted on a circuit board), be sure that the environment is
protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects
that come into direct contact with devices should be made of anti-static materials.
Start of commercial production
2004-03
1
2014-03-01
SSM6P25TU
Electrical Characteristics (Ta = 25°C) (Q1, Q2 Common)
Characteristics
Gate leakage current
Symbol
Test Condition
Min
Typ.
Max
Unit
I
V
= ± 12V, V
= 0
⎯
-20
-8
⎯
⎯
±1
⎯
μA
GSS
GS
DS
V
V
I
I
= -1 mA, V
= -1 mA, V
= 0
(BR) DSS
(BR) DSX
D
D
GS
GS
Drain-Source breakdown voltage
V
= +12 V
= 0
⎯
⎯
Drain cut-off current
I
V
V
V
= -20 V, V
⎯
⎯
-1
μA
V
DSS
DS
DS
DS
GS
Gate threshold voltage
Forward transfer admittance
V
= -3 V, I = -0.1 mA
-0.5
0.65
⎯
⎯
-1.1
⎯
th
D
⏐Y ⏐
= -3 V, I = -0.25 A
(Note2)
(Note2)
(Note2)
1.3
210
310
218
42
S
fs
D
I
I
= -0.25 A, V
= -4 V
260
430
⎯
D
D
GS
GS
Drain-Source on-resistance
R
mΩ
DS (ON)
= -0.25 A, V
= -2.5 V
⎯
Input capacitance
C
V
V
V
V
V
= -10 V, V
= -10 V, V
= -10 V, V
= 0, f = 1 MHz
= 0, f = 1 MHz
= 0, f = 1 MHz
⎯
pF
pF
pF
iss
rss
oss
on
DS
DS
DS
DD
GS
GS
GS
GS
Reverse transfer capacitance
Output capacitance
C
⎯
⎯
C
t
⎯
52
⎯
Turn-on time
Switching time
= -10 V, I = -0.25 A,
⎯
16
⎯
D
ns
= 0 to -2.5 V, R = 4.7 Ω
⎯
⎯
Turn-off time
t
15
G
off
Note2: Pulse test
Switching Time Test Circuit
(a) Test circuit
(b) V
IN
0 V
OUT
10%
0
IN
90%
−2.5V
10 μs
R
−2.5 V
L
V
DD
(c) V
V
OUT
DS (ON)
90%
V
= -10 V
= 4.7 Ω
DD
R
G
10%
Duty ≤ 1%
: t , t < 5 ns
V
DD
t
t
f
r
V
IN
r f
Common Source
t
t
off
on
Ta = 25°C
Precaution
V
th
can be expressed as the voltage between gate and source when the low operating current value is I =-100 μA for
D
this product. For normal switching operation, V
requires a higher voltage than V and V requires a lower
GS (off)
GS (on)
th
voltage than V
th.
(The relationship can be established as follows: V
< V < V
)
GS (off)
th
GS (on)
Please take this into consideration when using the device.
2
2014-03-01
SSM6P25TU
ID - VDS
-3.0
ID - VGS
-10000
-1600
-1400
-1200
-1000
-800
-600
-400
-200
0
-5.0
1000
-
-2.0
100
-
-4.0
10
-
Ta=100°C
-1.8
-
1
25°
-25°C
VGS=-1.6
-
0.1
Common Source
VDS=-3V
Common Source
Ta=25°C
-
-
0.01
0
-0.2
-0.4
-0.6
-0.8
-1
0
-1
-2
-3
Drain-Source voltage VDS (V)
Gate-Source voltage VGS (V)
RDS(ON) - VGS
RDS(ON) - ID
500
400
300
200
100
0
500
400
300
200
100
Common Source
ID=-250mA
-2.5V
Ta=100°C
VGS=-4V
25°C
-25°C
Common Source
Ta=25°C
0
0
-200 -400 -600 -800 -1000 -1200 -1400 -1600
Drain current ID (mA)
0
-1 -2 -3 -4 -5 -6 -7 -8 -9 -10
Gate-Source voltage VGS (V)
RDS(ON) - Ta
Vth - Ta
500
400
300
200
100
0
-1
Common Source
ID=-250mA
-0.8
-0.6
-0.4
-0.2
0
-2.5V
VGS=-4V
Common Source
ID=-0.1mA
VDS=-3V
-60 -40 -20
0
20 40 60 80 100 120 140 160
Ambient temperature Ta (°C)
-60 -40 -20
0
20 40 60 80 100 120 140 160
Ambient temperature Ta (°C)
3
2014-03-01
SSM6P25TU
|Yfs| - ID
IDR - VDS
Common Source
VGS=0V
Ta=25°C
10
1600
1400
1200
1000
800
600
400
200
0
25°C
-25°C
1
Ta=100°C
Common Source
VDS=-3V
Ta=25°C
0
-10
-100
-1000
-10000
0.0
0.2
0.4
0.6
0.8
1.0
Drain-Source voltage VDS (V)
Drain current ID (mA)
C - VDS
t - ID
1000
100
10
1000
100
10
Common Source
VDD=-10V
VGS=0~-2.5V
Ta=25°C
toff
tf
Ciss
ton
tr
Coss
Crss
Common Source
VGS=0V
f=1MHz
Ta=25°C
1
-0
-1
-10
-100
-10
-100
-1000
-10000
Drain current ID (mA)
Drain-Source voltage VDS (V)
PD* - Ta
1000
800
600
400
200
0
mounted FR4 board
t=10s
DC
(25.4mm*25.4mm*1.6t
2
Cu Pad :645mm )
0
20
40
60
80 100 120 140 160
Ambient temperature Ta(
)
℃
*:Total Rating
4
2014-03-01
SSM6P25TU
r
th
– t
w
1000
100
10
Single pulse
Mounted on FR4 board
2
(25.4 mm × 25.4 mm × 1.6 t, Cu Pad: 645 mm )
1
0.001
0.01
0.1
1
10
100
1000
Pulse width
t
(s)
w
5
2014-03-01
SSM6P25TU
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
6
2014-03-01
相关型号:
SSM6P25TU(TE85L)
TRANSISTOR,MOSFET,MATCHED PAIR,P-CHANNEL,20V V(BR)DSS,500MA I(D),SOT-363VAR
TOSHIBA
SSM6P25TU(TE85L,F)
TRANSISTOR,MOSFET,MATCHED PAIR,P-CHANNEL,20V V(BR)DSS,500MA I(D),SOT-363VAR
TOSHIBA
SSM6P25TU,LF(T
Small Signal Field-Effect Transistor, 0.5A I(D), 20V, 2-Element, P-Channel, Silicon, Metal-Oxide Semiconductor FET
TOSHIBA
SSM6P28TU(TE85L)
TRANSISTOR,MOSFET,MATCHED PAIR,P-CHANNEL,20V V(BR)DSS,800MA I(D),SOT-363VAR
TOSHIBA
SSM6P35FE(TE85L)
TRANSISTOR,MOSFET,MATCHED PAIR,P-CHANNEL,20V V(BR)DSS,100MA I(D),SOT-363VAR
TOSHIBA
SSM6P35FE(TPL3,F)
TRANSISTOR,MOSFET,MATCHED PAIR,P-CHANNEL,20V V(BR)DSS,100MA I(D),SOT-363VAR
TOSHIBA
©2020 ICPDF网 联系我们和版权申明