2SK3582TK-B [TOSHIBA]
TRANSISTOR 0.34 mA, N-CHANNEL, Si, SMALL SIGNAL, JFET, LEAD FREE, 2-1R1A, TESM3, 3 PIN, FET General Purpose Small Signal;
| 型号： | 2SK3582TK-B |
| 厂家： | 
TOSHIBA |
| 描述： | TRANSISTOR 0.34 mA, N-CHANNEL, Si, SMALL SIGNAL, JFET, LEAD FREE, 2-1R1A, TESM3, 3 PIN, FET General Purpose Small Signal 光电二极管 晶体管 |
| 文件： | 总5页 (文件大小：99K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2SK3582TK
TOSHIBA Field Effect Transistor Silicon N Channel Junction Type
2SK3582TK
For ECM
Unit: mm
•
Application for Ultra-compact ECM
1.2±0.05
0.8±0.05
Absolute Maximum Ratings (Ta=25°C)
1
2
3
Characteristic
Gate-Drain voltage
Symbol
Rating
Unit
V
-20
10
V
GDO
Gate Current
I
mA
mW
°C
G
Drain power dissipation (Ta = 25°C)
Junction Temperature
P
100
D
T
125
j
Storage temperature range
T
−55~125
°C
stg
1.Drain
2.Source
3.Gate
TESM3
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating
temperature/current/voltage, etc.) are within the absolute maximum
ratings.
JEDEC
-
-
JEITA
Please design the appropriate reliability upon reviewing the Toshiba
Semiconductor Reliability Handbook (“Handling
TOSHIBA
2-1R1A
Precautions”/“Derating Concept and Methods”) and individual
reliability data (i.e. reliability test report and estimated failure rate,
etc).
Weight: 2.2mg (typ.)
IDSS CLASSIFICATION
A-Rank
B-Rank
80 to 200 µA
170 to 300µA
Marking
Equivalent Circuit
D
Type Name
IDSS Classification Symbol
A :A-Rank
B :B-Rank
5
G
S
1
2007-11-01
2SK3582TK
Electrical Characteristics (Ta=25°C)
Characteristic
Drain Current
Symbol
Test Condition
Min
Typ.
Max
Unit
I
V
V
V
V
= 2 V, V
= 0
80
⎯
⎯
⎯
300
340
-0.65
⎯
µA
µA
V
DSS
DS
DD
DS
DS
GS
= 2 V, RL= 2kΩ,Cg = 10pF
= 2 V, I = 1μA
Drain Current
I
D
Gate-Source Cut-off Voltage
Forward transfer admittance
Gate-Drain Voltage
Input capacitance
V
-0.1
0.55
-20
⎯
⎯
GS(OFF)
D
|Y |
fs
= 2 V,V
= 0V
1.0
⎯
mS
V
GS
V
IG=-10μA
⎯
(BR)GDO
C
V
V
V
V
V
V
V
= 2 V, V = 0, f = 1 MHz
GS
3.6
0
⎯
pF
dB
dB
dB
mV
%
iss
DS
DD
DD
DD
DD
DD
DD
Voltage Gain
Gv
= 2V, RL= 2kΩ,Cg = 10pF, f = 1kHz,vin=100mV
= 2V, RL= 2kΩ,Cg = 10pF,f = 1kHz to 100Hz,vin=100mV
= 2V to 1.5V, RL= 2kΩ,Cg = 10pF,f = 1kHz, vin=100mV
= 2V, RL= 1kΩ,Cg = 10pF,Gv=80dB, A-Curve Filter
= 2V, RL= 2kΩ,Cg = 10pF, f = 1kHz, vin=50mV
= 2V, RL= 2kΩ,Cg = 10pF
-5.0
⎯
+2.0
-1.0
-3.0
50
Delta Voltage Gain
Delta Voltage Gain
Noise Voltage
DGv(f)
0
DGv(V)
VN
⎯
-1.0
⎯
⎯
Total Harmonic Distortion
Time Output Stability
THD
tos
⎯
1.0
100
⎯
⎯
200
ms
Time Output Stability Test Method
a) TEST CIRCUIT
b) TEST SIGNAL
V
DD
2V
V
DD=2.0V
50%
Vout
0V
Vout
V
DD-ID*RL
90%
0V
t
os
2
2007-11-01
2SK3582TK
I
D
– V
|Yfs| – I
DSS
GS
600
500
3
|Yfs|:VDS=2V
VGS=0V
VDS=2V
Common Source
Ta = 25 °C
IDSS: VDS=2V
VGS=0V
Common Source
400
300
Ta = 25 °C
2
1
IDSS=290μA
200
100
0
110μA
0
100
200
300
600
400
500
-1.0
-0.8
-0.6
-0.4
-0.2
0
Gate - Source voltage
V
(V)
Drain Current
I
(µA)
GS
DSS
Gv– I
DSS
V
– I
DSS
GS(OFF)
0
-500
-400
–1
–2
–3
-300
-200
Gv:VDD=2V
Cg=5pF
RL= 2.2kΩ,
VGS(OFF):VDS=2V
ID = 1μA
f=1kHz
vin=100mV
IDSS:VDS=2V
VGS=0V
IDSS: VDS=2V
VGS=0V
Common Source
–4
–5
-100
0
Common Source
Ta = 25°C
Ta = 25 °C
0
100
200
300
400
500
600
0
100
200
300
400
500
600
Drain Current
I
DSS
(µA)
Drain Current
I
(µA)
DSS
DGv(V)– I
DSS
VN – I
DSS
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0
60
50
DGv:VDD=2V→1.5V
VN:VDD=2V
Cg=5pF
RL= 2.2kΩ,
f=1kHz
Cg=10pF
RL= 1kΩ
f=1kHz
80dB AMP
A-Curve Filter
vin=100mV
IDSS: VDS=2V
VGS=0V
40
30
IDSS: VDS=2V
VGS=0V
Common Source
Ta = 25°C
Common Source
Ta = 25°C
20
10
0
0
100
200
300
400
500
600
0
100
200
300
400
500
600
Drain Current
I
(µA)
DSS
Drain Current
I
(µA)
DSS
3
2007-11-01
2SK3582TK
THD– I
DSS
C – V
iss DS
2.0
1.5
1.0
10
5
THD:VDD=2V
Cg=5pF
RL= 2.2kΩ
f=1kHz
vin=50mV
IDSS: VDS=2V
VGS=0V
Common Source
Ta = 25°C
0.5
0
VGS=0V
f=1kHz
Common Source
Ta = 25°C
1
1
10
5
0
100
200
300
400
500
600
Drain - Source voltage
V
(V)
Drain Current
I
(µA)
DS
DSS
4
2007-11-01
2SK3582TK
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2007-11-01
相关型号：
2SK3582TV-A
TRANSISTOR 0.34 mA, N-CHANNEL, Si, SMALL SIGNAL, JFET, 2-1H1A, VESM2, 3 PIN, FET General Purpose Small Signal
TOSHIBA
2SK3582TV-B
TRANSISTOR 0.34 mA, N-CHANNEL, Si, SMALL SIGNAL, JFET, 2-1H1A, VESM2, 3 PIN, FET General Purpose Small Signal
TOSHIBA
2SK3585G
Small Signal Field-Effect Transistor, 0.00046A I(D), 1-Element, N-Channel, Silicon, Junction FET, ROHS COMPLIANT, SSSMINI3-F2, 3 PIN
PANASONIC
©2020 ICPDF网 联系我们和版权申明