2SD1508_09 [TOSHIBA]
Pulse Motor Drive, Hammer Drive Applications; 脉冲马达驱动器，锤驱动应用
| 型号： | 2SD1508_09 |
| 厂家： | 
TOSHIBA |
| 描述： | Pulse Motor Drive, Hammer Drive Applications |
| 文件： | 总5页 (文件大小：161K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2SD1508
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) (Darlington power transistor)
2SD1508
Pulse Motor Drive, Hammer Drive Applications
Unit: mm
Switching Applications
Power Amplifier Applications
•
•
High DC current gain: h
= 4000 (min) (V
= 2 V, I = 150 mA)
FE
CE C
Low saturation voltage: V
= 1.5 V (max) (I = 1 A, I = 1 mA)
C B
CE (sat)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Collector-base voltage
Symbol
Rating
Unit
V
CBO
V
CEO
V
EBO
30
30
V
V
V
Collector-emitter voltage
Emitter-base voltage
10
DC
I
1.5
3.0
50
C
Collector current
Base current
A
mA
W
Pulse
I
CP
I
JEDEC
JEITA
―
―
B
Ta = 25°C
Tc = 25°C
1.2
10
Collector power
dissipation
P
C
TOSHIBA
2-8H1A
Junction temperature
T
150
°C
°C
j
Weight: 0.82 g (typ.)
Storage temperature range
T
stg
−55 to 150
Note1: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Equivalent Circuit
COLLECTOR
BASE
EMITTER
1
2009-12-21
2SD1508
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
= 30 V, I = 0
Min
Typ.
Max
Unit
Collector cut-off current
I
V
V
―
―
―
―
―
―
―
―
10
10
―
μA
μA
V
CBO
CB
EB
E
Emitter cut-off current
I
= 10 V, I = 0
C
EBO
(BR) CEO
Collector-emitter breakdown voltage
DC current gain
V
I
= 10 mA, I = 0
30
C
B
h
V
= 2 V, I = 150 mA
4000
―
―
FE
CE
C
Collector-emitter saturation voltage
Base-emitter saturation voltage
V
I
I
= 1 A, I = 1 mA
1.5
2.2
V
V
CE (sat)
BE (sat)
C
C
B
V
= 1 A, I = 1 mA
―
B
Turn-on time
t
―
―
―
0.18
0.6
―
―
―
Input
Output
on
20 μs
I
B1
I
B2
Switching time
μs
Storage time
Fall time
t
stg
V
≈ 15 V
CC
I
= 1 mA,I = 1 mA,
B2
t
f
B1
0.3
duty cycle ≤ 1%
Marking
Lot No.
D1508
Note2
Part No. (or abbreviation code)
Note2: A line under a Lot No. identifies the indication of product Labels.
Not underlined: [[Pb]]/INCLUDES > MCV
Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27
January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
2
2009-12-21
2SD1508
I
– V
I – V
C
C
CE
CE
35
600
500
400
300
200
100
0
600
500
400
300
200
100
0
Common emitter
Tc = 25°C
Common emitter
Tc = 100°C
60
30
50
25
20
40
30
15
10
20
= 10 μA
0
I
B
I
= 5 μA
0
B
0
1
2
3
4
5
6
7
7
3
0
1
2
3
4
5
6
7
Collector-emitter voltage
V
(V)
Collector-emitter voltage
V
(V)
CE
CE
I
– V
I
– V
BE
C
CE
C
600
500
400
300
200
100
0
1.0
0.8
Common emitter
Common emitter
= 2 V
Tc = −50°C
V
CE
160
140
120
0.6
0.4
0.2
0
100
80
25
Tc = 100°C
−50
60
40
I
= 20 μA
B
0
0.4
0.8
1.2
1.6
2.0
0
1
2
3
4
5
6
0
2.4
Collector-emitter voltage
V
(V)
Base-emitter voltage
V
(V)
CE
BE
h
– I
FE
C
V
– I
C
CE (sat)
100000
30
10
Common emitter
= 2 V
Common emitter
/I = 1000
50000
30000
V
CE
I
C B
Tc = 100°C
25
5
3
10000
5000
3000
Tc = −50°C
−50
1
0.5
0.3
100
25
1000
500
300
0.1
0.003
0.01
0.03
0.1
0.3
1
0.003
0.01
0.03
0.1
0.3
1
3
Collector current
I
C
(A)
Collector current
I
C
(A)
3
2009-12-21
2SD1508
V
– I
r – t
th w
BE (sat)
C
30
10
Common emitter
/I = 1000
Curves should be applied in thermal limited area.
(single nonrepetitive pulse)
(1) Infinite heat sink
I
C B
(2) No heat sink
5
3
100
10
1
Tc = −50°C
(2)
(1)
1
25
100
0.5
0.3
0.1
0.003
0.01
0.03
0.1
0.3
1
3
0.1
0.001
0.01
0.1
1
10
100
1000
Collector current
I
C
(A)
Pulse width
t
(s)
w
Safe Operating Area
5
3
I
max (pulsed)*
C
100 μs*
I
max (continuous)
C
1
1 ms*
10 ms*
0.5
0.3
DC operation
Tc = 25°C
*: Single nonrepetitive
pulse Tc = 25°C
Curves must be derated
linearly with increase in
temperature.
0.1
0.05
0.03
V
max
30
CEO
0.5
100
1
3
10
Collector-emitter voltage
V
(V)
CE
4
2009-12-21
2SD1508
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2009-12-21
相关型号：
2SD1509
NPN EPITAXIAL TYPE (MICRO MOTOR DRIVE, HAMMER DRIVE, SWITCHING, POWER AMPLIFIER APPLICATIONS)
TOSHIBA
2SD1511
Silicon NPN epitaxial planer type darlington(For low-frequency output amplification)
PANASONIC
2SD1511G
Small Signal Bipolar Transistor, 1A I(C), 80V V(BR)CEO, 2-Element, NPN, Silicon, ROHS COMPLIANT, MINIP3-F2, 4 PIN
PANASONIC
2SD1511GR
Small Signal Bipolar Transistor, 1A I(C), 80V V(BR)CEO, 1-Element, NPN, Silicon, ROHS COMPLIANT, MINIP3-F2, 3 PIN
PANASONIC
©2020 ICPDF网 联系我们和版权申明