1SS344_07 [TOSHIBA]

Ultra High Speed Switching Application; 超高速开关应用
1SS344_07
型号: 1SS344_07
厂家: TOSHIBA    TOSHIBA
描述:

Ultra High Speed Switching Application
超高速开关应用

开关
文件: 总3页 (文件大小:183K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
1SS344  
TOSHIBA Diode Silicon Epitaxial Schottky Planar Type  
1SS344  
Ultra High Speed Switching Application  
Unit: mm  
z Low forward voltage  
: V  
= 0.50V (typ.)  
F (3)  
z Fast reverse recovery time : t = 20ns (typ.)  
rr  
z High average forward current : I = 0.5A (max)  
O
Absolute Maximum Ratings (Ta = 25°C)  
Characteristic  
Symbol  
Rating  
Unit  
Maximum (peak) reverse voltage  
Reverse voltage  
V
25  
20  
V
V
RM  
V
R
Maximum (peak) forward current  
Average forward current  
Surge current (10ms)  
Power dissipation  
I
1500  
500  
mA  
mA  
A
FM  
I
O
I
5
FSM  
P
200  
mW  
°C  
°C  
°C  
Junction temperature  
T
j
125  
Storage temperature  
T
55~125  
40~100  
stg  
opr  
JEDEC  
TD-236MOD  
Operating Temperature  
T
EIAJ  
SC-59  
1-3G1B  
TOSHIBA  
Weight: 0.012g  
Note: Using continuously under heavy loads (e.g. the application of high  
temperature/current/voltage and the significant change in  
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating  
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.  
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook  
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test  
report and estimated failure rate, etc).  
Electrical Characteristics (Ta = 25°C)  
Test  
Circuit  
Characteristic  
Symbol  
Test Condition  
= 10mA  
Min  
Typ.  
Max  
Unit  
V
V
V
V
I
I
I
0.30  
0.38  
0.50  
F (1)  
F (2)  
F (3)  
R (1)  
R (2)  
F
F
F
Forward voltage  
= 100mA  
= 500mA  
0.55  
20  
I
I
V
V
V
= 10V  
R
R
R
Reverse current  
μA  
= 20V  
100  
Total capacitance  
C
T
= 0, f = 1MHz  
120  
20  
pF  
ns  
Reverse recovery time  
t
I
= 50mA, (Fig.1)  
F
rr  
1
2007-11-01  
1SS344  
Fig.1 Reverse Recovery Time (t ) Test Circuit Marking  
rr  
2
2007-11-01  
1SS344  
RESTRICTIONS ON PRODUCT USE  
20070701-EN GENERAL  
The information contained herein is subject to change without notice.  
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor  
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical  
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of  
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of  
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.  
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as  
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and  
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability  
Handbook” etc.  
The TOSHIBA products listed in this document are intended for usage in general electronics applications  
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,  
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires  
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or  
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or  
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,  
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his  
document shall be made at the customer’s own risk.  
The products described in this document shall not be used or embedded to any downstream products of which  
manufacture, use and/or sale are prohibited under any applicable laws and regulations.  
The information contained herein is presented only as a guide for the applications of our products. No  
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which  
may result from its use. No license is granted by implication or otherwise under any patents or other rights of  
TOSHIBA or the third parties.  
Please contact your sales representative for product-by-product details in this document regarding RoHS  
compatibility. Please use these products in this document in compliance with all applicable laws and regulations  
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses  
occurring as a result of noncompliance with applicable laws and regulations.  
3
2007-11-01  

相关型号:

1SS345

UHF Detector, Mixer Applications
SANYO

1SS345

Sillicon Epitaxial Schottky Barrier Diode
KEXIN

1SS345

Small interterminal capacitance (C=0.45pF typ). High breakdown voltage (VR=55V).
TYSEMI

1SS348

DIODE (LOW VOLTAGE HIGH SPEED SWITCHING)
TOSHIBA

1SS348

LOW VOLTAGE HIGH SPEED SWITCHING
KEXIN

1SS348

Small package Low forward voltage: VF(3) = 0.56V(Typ). Low voltage current: :IR = 5A(Max).
TYSEMI

1SS348TE85R2

DIODE 0.1 A, SILICON, SIGNAL DIODE, Signal Diode
TOSHIBA

1SS348_07

Low Voltage High Speed Switching
TOSHIBA

1SS349

DIODE (LOW VOLTAGE HIGH SPEED SWITCHING)
TOSHIBA

1SS349

LOW VOLTAGE HIGH SPEED SWITCHING
KEXIN

1SS349

Small package Low forward voltage: VF3 = 0.49V(Typ). Low voltage current: :IR = 50A(Max).
TYSEMI

1SS349TE85L2

DIODE 1 A, SILICON, SIGNAL DIODE, Signal Diode
TOSHIBA