TWL1200-Q1 [TI]
SDIO, UART, AND AUDIO VOLTAGE-TRANSLATION TRANSCEIVER; SDIO , UART和音频电压转换收发器![TWL1200-Q1](http://pdffile.icpdf.com/pdf2/p00204/img/icpdf/TWL120_1152162_icpdf.jpg)
型号: | TWL1200-Q1 |
厂家: | ![]() |
描述: | SDIO, UART, AND AUDIO VOLTAGE-TRANSLATION TRANSCEIVER |
文件: | 总32页 (文件大小:736K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
SDIO, UART, AND AUDIO VOLTAGE-TRANSLATION TRANSCEIVER
Check for Samples: TWL1200-Q1
1
FEATURES
•
Qualified for Automotive Applications
•
Latch-Up Performance Exceeds 100 mA per
JESD 78, Class II
•
AEC-Q100 Test Guidance With the Following
Results:
–
Device Temperature Grade 3: –40°C to
+85°C Ambient Operating Temperature
Range
–
–
Device HBM ESD Classification Level H1C
Device CDM ESD Classification Level C3B
•
•
Level Translator
VCCA and VCCB Range of 1.1 V to 3.6 V
–
Seamlessly Bridges 1.8-V/2.6-V Digital-
Switching Compatibility Gap Between 2.6-V
processors and TI’s Wi-Link (WL1271 and
WL1273)
PFB PACKAGE
(TOP VIEW)
SDIO_CLK_B
VCCB
SDIO_CMD_B
AUDIO_F_SYNK_B
AUDIO_CLK_B
OE
37
38
39
40
41
42
43
44
45
46
47
48
BT_UART_RTS_B
24
23
22
21
20
19
18
17
16
15
14
13
BT_UART_TX_B
AUD_IN_B
PCM_AUD_OUT_B
GND
SLOW_CLK_A
SLOW_CLK_B
PCM_AUDIO_OUT_A
AUDIO_IN_A
BT_UART_TX_A
GND
AUD_DIR
VCCA
AUD_CLK_A
AUDIO_F_SYNK_A
SDIO_CMD_A
SDIO_DATA0_A
BT_UART_RX_A
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
DESCRIPTION
The TWL1200-Q1 is a 19-bit voltage translator specifically designed to bridge seamlessly the 1.8-V/2.6-V digital-
switching compatibility gap between 2.6-V baseband and the TI Wi-Link-6 (WL1271/3). The device is optimized
for SDIO, UART, and audio functions. The TWL1200-Q1 has two supply-voltage pins, VCCA and VCCB, that can
be operated over the full range of 1.1 V to 3.6 V. The TWL1200-Q1 enables system designers easily to interface
applications processors or digital basebands to peripherals operating at a different I/O voltage levels, such as the
TI Wi-Link-6 (WL1271/3) or other SDIO/memory cards.
The TWL1200-Q1 is offered in a thin quad flat pack [TQFP (PFB)] package. Low static power consumption and
small package size make the TWL1200-Q1 an ideal choice for mobile-phone applications.
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION(1)
ORDERABLE
PART NUMBER
TA
PACKAGE(2)
TOP-SIDE MARKING
–40°C to 85°C TQFP – PFB
Tape and reel
TWL1200IPFBRQ1
TWL1200Q1
(1) For the most-current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
Web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
TERMINAL FUNCTIONS
TERMINAL
TYPE
DESCRIPTION
NAME
AUD_CLK_A
NO.
45
41
43
46
40
16
22
10
28
11
27
12
24
13
25
15
23
9
I/O
I/O
I
Connected to baseband audio subsystem; drive strength = 4 mA
Connected to Wi-Link-6 PCM subsystem; drive strength = 4 mA
Direction control signal for AUDIO_CLK and AUDIO_F-SYNC signals
Connected to baseband audio subsystem; drive strength = 4 mA
Connected to Wi-Link-6 PCM subsystem; drive strength = 4 mA
Connected to baseband audio subsystem
AUDIO_CLK_B
AUD_DIR
AUDIO_F_SYNK_A
AUDIO_F_SYNK_B
AUDIO_IN_A
I/O
I/O
I
AUD_IN_B
O
I
Connected to Wi-Link-6 PCM subsystem; drive strength = 4 mA
Connected to baseband UART subsystem
BT_EN_A
BT_EN_B
O
I
Connected to BT UART subsystem of Wi-Link-6; drive strength = 2 mA
Connected to baseband UART subsystem
BT_UART_CTS_A
BT_UART_CTS_B
BT_UART_RTS_A
BT_UART_RTS_B
BT_UART_RX_A
BT_UART_RX_B
BT_UART_TX_A
BT_UART_TX_B
CLK_REQ_A
O
O
I
Connected to BT UART subsystem of Wi-Link-6; drive strength = 4 mA
Connected to baseband UART subsystem; drive strength = 4 mA
Connected to BT UART subsystem of Wi-Link-6
I
Connected to baseband UART subsystem
O
O
I
Connected to BT UART subsystem of Wi-Link-6; drive strength = 8 mA
Connected to baseband UART subsystem; drive strength = 8 mA
Connected to BT UART subsystem of Wi-Link-6
O
I
Connected to baseband SDIO controller; drive strength = 4 mA
Connected to SD/SDIO peripheral
CLK_REQ_B
29
8, 14,
20, 26
Ground
GND
OE
42
17
21
1
I
O
I
Output enable (active low)
PCM_AUDIO_OUT_A
PCM_AUD_OUT_B
SDIO_CLK_A
Connected to baseband audio subsystem; drive strength = 4 mA
Connected to Wi-Link-6 PCM subsystem
I
Clock signal connected to baseband SDIO controller. Referenced to VCCA
Clock signal connected to SD/SDIO peripheral. Referenced to VCCB; drive strength = 8
mA
SDIO_CLK_B
37
O
2
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
TERMINAL FUNCTIONS (continued)
TERMINAL
NAME
TYPE
DESCRIPTION
NO.
47
39
48
36
4
SDIO_CMD_A
SDIO_CMD_B
SDIO_DATA0_A
SDIO_DATA0_B
SDIO_DATA1_A
SDIO_DATA1_B
SDIO_DATA2_A
SDIO_DATA2_B
SDIO_DATA3_A
SDIO_DATA3_B
SLOW_CLK_A
SLOW_CLK_B
VCCA
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I
Command bit connected to baseband SDIO controller. Referenced to VCCA.
Command bit connected to SD/SDIO peripheral. Includes a 15-kΩ pullup resistor to VCCB
Data bit 1 connected to baseband SDIO controller
Data bit 0 connected to SD/SDIO peripheral
.
Data bit 1 connected to baseband SDIO controller
Data bit 1 connected to SD/SDIO peripheral
34
5
Data bit 2 connected to baseband SDIO controller
Data bit 2 connected to SD/SDIO peripheral
33
3
Data bit 3 connected to baseband SDIO controller
Data bit 3 connected to SD/SDIO peripheral
35
19
18
2, 44
32, 38
7
Low frequency 32-kHz clock connected to baseband device
Low frequency 32-kHz clock connected to Wi-Link-6 device; drive strength = 2 mA
A-side supply voltage (1.1 V to 3.6 V)
O
Pwr
Pwr
I
VCCB
B-side supply voltage (1.1 V to 3.6 V)
WLAN_EN_A
WLAN_EN_B
WLAN_IRQ_A
WLAN_IRQ_B
Connected to baseband SDIO controller
30
6
O
Connected to SD/SDIO peripheral; drive strength = 2 mA
Connected to baseband SDIO controller; drive strength = 4 mA
Connected to SD/SDIO peripheral
O
31
I
Table 1. FUNCTION TABLE
CONTROL INPUTS
OPERATION
OE
AUD_DIR
H
X
All outputs are Hi-Z
AUDIO_CLK_A to AUDIO_CLK_B and
AUDIO_F-SYNC_A_ to AUDIO_F-SYNC_B
L
L
H
L
AUDIO_CLK_B to AUDIO_CLK_A and
AUDIO_F-SYNC_B to AUDIO_F-SYNC_A
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
LOGIC DIAGRAM
VCCA
VCCB
Control
OE
Logic
BT_EANBLE(A)
BT_EANBLE(B)
BT_UART_RX(A)
BT_UART_CTS(A)
BT_UART_TX(A)
BT_UART_RTS(A)
AUDIO_IN(A)
BT_UART_RX(B)
BT_UART_CTS(B)
BT_UART_TX(B)
BT_UART_RTS(B)
AUDIO_IN(B)
AUDIO_OUT(A)
SLOW_CLK(A)
AUDIO_OUT(B)
SLOW_CLK(B)
Audio
Control
AUD_DIR
AUDIO_CLK(A)
AUDIO_CLK(B)
AUDIO_FSYNC(A)
SDIO Bit
AUDIO_F_SYNC(B)
VCCA
VCCB
R1
(see Note A)
R2
(see Note A)
One-Shot
One-Shot
Translator
Gate Control
SDIO-CMD(A)
SDIO-CMD(B)
One-Shot
One-Shot
Translator
VCCA
VCCB
SDIO Bit
R1
(see Note A)
R2
(see Note A)
One-Shot
One-Shot
Translator
Gate Control
SDIO-DATA0(A)
SDIO-DATA0(B)
One-Shot
One-Shot
Translator
VCCA
VCCB
SDIO Bit
R1
(see Note A)
R2
(see Note A)
One-Shot
One-Shot
Translator
Gate Control
SDIO-DATA1(A)
SDIO-DATA1(B)
One-Shot
One-Shot
Translator
VCCA
VCCB
SDIO Bit
R1
(see Note A)
R2
(see Note A)
One-Shot
One-Shot
Translator
Gate Control
SDIO-DATA2(A)
SDIO-DATA2(B)
One-Shot
One-Shot
Translator
VCCA
VCCB
SDIO Bit
R1
(see Note A)
R2
(see Note A)
One-Shot
One-Shot
Translator
Gate Control
SDIO-DATA3(A)
SDIO-DATA3(B)
One-Shot
One-Shot
Translator
SDIO-CLK(A)
SDIO-CLK(B)
WLAN-ENABLE(A)
WLAN-IRQ(A)
WLAN-ENABLE(B)
WLAN-IRQ(B)
CLK-REQ(A)
CLK-REQ(B)
A. R1 and R2 resistor values are determined based upon the logic level applied to the A port or B port as follows:
R1 and R2 = 25 kΩ when a logic-level low is applied to the A port or B port.
R1 and R2 = 4 kΩ when a logc- level high is applied to the A port or B port.
R1 and R2 = 70 kΩ when the port is deselected (or in Hi-Z state).
B. OE controls all output buffers. When OE = high, all outputs are Hi-Z.
4
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
TYPICAL APPLICATION BLOCK DIAGRAM
2.6 V
1.8 V
Wi-Link-6 (WL1271/3)
Baseband Processor
V
V
CCB
CCA
SDIO_DATA0(A)
SDIO_DATA1(A)
SDIO_DATA2(A)
SDIO_DATA3(A)
SDIO_CMD(A)
SDIO_DATA0(B)
SDIO_DATA1(B)
SDIO_DATA2(B)
SDIO_DATA3(B)
SDIO_CMD(B)
SD/SDIO
Peripheral
SDIO
Controller
SDIO_CLK(A)
SDIO_CLK(B)
WLAN_ENABLE(A)
WLAN_IRQ(A)
WLAN_ENABLE(B)
WLAN_IRQ(B)
CLK_REQ(A)
CLK_REQ(B)
BT_ENABLE(A)
BT_UART_RX(A)
BT_UART_CTS(A)
BT_UART_TX(A)
BT_UART_RTS(A)
AUDIO_IN(A)
BT_ENABLE(B)
BT_UART_RX(B)
BT_UART_CTS(B)
BT_UART_TX(B)
BT_UART_RTS(B)
AUDIO_IN(B)
TWL1200
BT UART
UART
AUDIO_CLK(A)
AUDIO_CLK(B)
AUDIO F-SYNK(B)
AUDIO_OUT(B)
SLOW_CLK(B)
AUDIO F-SYNK(A)
AUDIO_OUT(A)
PCM
Audio
SLOW_CLK(A)
AUD_DIR (see Note A)
OE (see Note B)
GND
A. AUD_DIR must be biased to determine audio direction (see Function Table for properly establishing the bias).
B. OE is an active-low pin that must be grounded to 0 V to enable operation of the TWL1200-Q1 device.
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
–0.5
MAX
4.6
UNIT
V
VCCA
VCCB
Supply voltage range
Supply voltage range
4.6
V
I/O ports (A port)
I/O ports (B port)
Control inputs
A port
4.6
VI
Input voltage range
4.6
V
4.6
4.6
Voltage range applied to any output in the high-impedance or power-off
state(2)
VO
VO
V
V
B port
4.6
A port
4.6
Voltage range applied to any output in the high or low state(2)
B port
4.6
IIK
IOK
IO
Input clamp current
VI < 0
–50
–50
±50
±100
150
1.5
mA
mA
mA
mA
°C
Output clamp current
VO < 0
Continuous output current
Continuous current through VCCA, VCCB, or GND
Storage temperature range
Tstg
–65
Human-body model (HBM) AEC-Q100 Classification Level H1C
Charged-device model (CDM) AEC-Q100 Classification Level C3B
kV
V
ESD
rating
750
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
THERMAL INFORMATION
TWL1200-Q1
THERMAL METRIC(1)
PFB
48 PINS
70.1
UNIT
θJA
Junction-to-ambient thermal resistance(2)
Junction-to-case (top) thermal resistance(3)
Junction-to-board thermal resistance(4)
Junction-to-top characterization parameter(5)
Junction-to-board characterization parameter(6)
Junction-to-case (bottom) thermal resistance(7)
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
θJCtop
θJB
20.8
32.8
ψJT
0.6
ψJB
32.6
θJCbot
N/A
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
(2) The junction-to-ambient thermal resistance under natural convection is obtained in a simulation on a JEDEC-standard, high-K board, as
specified in JESD51-7, in an environment described in JESD51-2a.
(3) The junction-to-case (top) thermal resistance is obtained by simulating a cold plate test on the package top. No specific JEDEC-
standard test exists, but a close description can be found in the ANSI SEMI standard G30-88.
(4) The junction-to-board thermal resistance is obtained by simulating in an environment with a ring cold plate fixture to control the PCB
temperature, as described in JESD51-8.
(5) The junction-to-top characterization parameter, ψJT, estimates the junction temperature of a device in a real system and is extracted
from the simulation data for obtaining θJA, using a procedure described in JESD51-2a (sections 6 and 7).
(6) The junction-to-board characterization parameter, ψJB, estimates the junction temperature of a device in a real system and is extracted
from the simulation data for obtaining θJA , using a procedure described in JESD51-2a (sections 6 and 7).
(7) The junction-to-case (bottom) thermal resistance is obtained by simulating a cold plate test on the exposed (power) pad. No specific
JEDEC standard test exists, but a close description can be found in the ANSI SEMI standard G30-88.
6
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
RECOMMENDED OPERATING CONDITIONS(1)
VCCI
VCCO
MIN
1.1
MAX UNIT
VCCA
VCCB
Supply voltage
Supply voltage
3.6
3.6
V
V
1.1
Buffer type
VCCI × 0.65
VCCA × 0.65
VCCI – 0.2
3.6
VIH
VIH
High-level input voltage
High-level input voltage
1.1 V to 3.6 V
1.1 V to 3.6 V
1.1 V to 3.6 V
1.1 V to 3.6 V
V
V
OE and AUD_DIR
Switch type
3.6
VCCI
Buffer type and
Control Logic
0
VCCI × 0.35
VIL
Low-level input voltage
1.1 V to 3.6 V
1.1 V to 3.6 V
1.1 V to 3.6 V
1.1 V to 3.6 V
V
OE and AUD_DIR
Switch type
0
0
0
0
0
VCCA × 0.35
(2)
VIL
VI
Low-level input voltage
Input voltage
0.15
3.6
VCCO
3.6
–0.5
–1
–2
–4
–8
0.5
1
V
V
Active state
VO
Output voltage
V
High-impedance state
1.1 V to 1.3 V
1.4 V to 1.6 V
1.65 V to 1.95 V
2.3 V to 2.7 V
3 V to 3.6 V
IOH
High-level output current
mA
1.1 V to 1.3 V
1.4 V to 1.6 V
1.65 V to 1.95 V
2.3 V to 2.7 V
3 V to 3.6 V
IOL
Low-level output current
2
mA
4
8
Δt/Δv
Input transition rise or fall rate
Operating free-air temperature
5
ns/V
°C
TA
–40
85
(1) All unused data inputs of the device must be held at VCCI or GND to ensure proper device operation. See the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
(2) Note, the max VIL value is provided to ensure that a valid VOL is maintained. The VOL value is the VIL + the voltage-drop across the
pass-gate transistor.
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
ELECTRICAL CHARACTERISTICS
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
IOH = –100 μA
VCCA
1.1 V to 3.6 V
1.65 V
VCCB
1.1 V to 3.6 V
1.65 V
MIN
VCCO – 0.2
1.2
TYP(1) MAX UNIT
A port
(Buffer-type output,
8-mA drive)
IOH = –8 mA
IOH = –100 μA
IOH = –4 mA
2.5 V
2.5 V
1.97
VOH
V
1.1 V to 3.6 V
1.65 V
1.1 V to 3.6 V
1.65 V
VCCO – 0.2
1.2
A port
(Buffer-type output,
4-mA drive)
2.5 V
2.5 V
1.97
A port
1.65 V
1.65 V
1.5
VOH (Switch-type
outputs)
IOH = –20 μA
V
2.5 V
2.5 V
2.3
IOL = 100 μA
IOL = 8 mA
IOL = 100 μA
IOL = 4 mA
1.1 V to 3.6 V
1.65 V
1.1 V to 3.6 V
1.65 V
0.2
A port
(Buffer-type output,
8-mA drive)
0.45
2.5 V
2.5 V
0.55
V
VOL
1.1 V to 3.6 V
1.65 V
1.1 V to 3.6 V
1.65 V
0.2
A port
(Buffer-type output,
4-mA drive)
0.45
0.55
0.45
2.5 V
2.5 V
A port
VOL (Switch-type
outputs)
IOL = 220 μA, VIN = 0.15 V
IOL = 300 μA, VIN = 0.15 V
IOH = –100 μA
1.65 V
1.65 V
V
2.5 V
2.5 V
0.55
1.1 V to 3.6 V
1.65 V
1.1 V to 3.6 V
1.65 V
VCC0 – 0.2
1.2
B port
(Buffer-type output,
IOH = –8 mA
IOH = –100 μA
IOH = –4 mA
IOH = –100 μA
IOH = –2 mA
8-mA drive)
2.5 V
2.5 V
1.97
1.1 V to 3.6 V
1.65 V
1.1 V to 3.6 V
1.65 V
VCC0 – 0.2
1.2
B port
(Buffer-type output,
4-mA drive)
2.5 V
2.5 V
1.97
VOH
V
1.1 V to 3.6 V
1.65 V
1.1 V to 3.6 V
1.65 V
VCC0 – 0.2
1.2
B port
(Buffer-type output,
2-mA drive)
2.5 V
2.5 V
1.97
B port
1.65 V
1.65 V
1.5
(Switch-type
outputs)
IOH = –20 μA
2.5 V
2.5 V
2.3
IOL = 100 μA
IOL = 8 mA
IOL = 100 μA
IOL = 4 mA
IOL = 100 μA
IOL = 2 mA
1.1 V to 3.6 V
1.65 V
1.1 V to 3.6 V
1.65 V
0.2
0.45
0.55
0.2
B port
(Buffer-type output,
8-mA drive)
2.5 V
2.5 V
1.1 V to 3.6 V
1.65 V
1.1 V to 3.6 V
1.65 V
B port
(Buffer-type output,
4-mA drive)
0.45
2.5 V
2.5 V
0.55
V
VOL
1.1 V to 3.6 V
1.65 V
1.1 V to 3.6 V
1.65 V
0.2
0.45
0.55
0.45
B port
(Buffer-type output,
2-mA drive)
2.5 V
2.5 V
B port
(Switch-type
outputs)
IOL = 220 μA, VIN = 0.15 V
IOL = 300 μA, VIN = 0.15 V
VI = VCCA or GND
1.65 V
1.65 V
2.5 V
2.5 V
0.55
II
1.1 V to 3.6 V
1.1 V to 3.6 V
3.6 V
1.1 V to 3.6 V
1.1 V to 3.6 V
0 V
±1 μA
15
Switch-type I/O are open and all
other inputs are biased at either
VCC or GND
ICCA
14 μA
–12
0 V
3.6 V
(1) All typical values are at TA = 25°C.
Submit Documentation Feedback
8
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
ELECTRICAL CHARACTERISTICS (continued)
over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VCCA
1.1 V to 3.6 V
3.6 V
VCCB
1.1 V to 3.6 V
0 V
MIN
TYP(1) MAX UNIT
15
Switch-type I/O are open and all
other inputs are biased at either
VCC or GND
ICCB
–12 μA
14
0 V
3.6 V
ICCA + ICCB
Auto-Dir (SDIO
VI = VCCI or GND, IO = 0
VI = VCCI
1.1 V to 3.6 V
1.1 V to 3.6 V
30 μA
5.5
pF
(2)
lines)
Cio
Bi-Dir buffer
AUD_DIR / OE
Buffer
VI = VCCX or GND
VI = VCCA or GND
VI = VCCX or GND
VI = VCCX or GND
VI = VCCX or GND
VI = VCCX or GND
4.5
4
Ci(2)
pF
4
2-mA buffer
4-mA buffer
8-mA buffer
5
(2)
Co
5
6
pF
(2) Not production tested
OUTPUT DRIVE STRENGTH
2 mA
4 mA
8 mA
WLAN_EN_B
SLOW_CLK_B
BT_EN_B
AUDIO_OUT_A
WLAN_IRQ_A
SDIO_CLK_B
BT_UART_TX_A
BT_UART_RX_B
CLK_REQ_A
AUDIO_IN_B
AUDIO_CLK_A
BT_UART CTS_B
BT_UART RTS_A
AUDIO_F-SYNC_A
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
TIMING REQUIREMENTS(1)
VCCA = 2.5 V ± 0.2 V
over recommended operating free-air temperature range (unless otherwise noted)
VCCB = 1.8 V
± 0.15 V
UNIT
MIN
MAX
Push-pull driving
60
1
SDIO_CMD
Open-drain driving
Data rate
Mbps
SDIO_CLK
50 MHz
Push-pull driving
SDIO_DATAx
60 Mbps
Push-pull driving
SDIO_CMD
17
1
ns
μs
ns
ns
Open-drain driving
tW
Pulse duration
SDIO_CLK
10
17
Push-pull driving
SDIO_DATAx
(1) Not production tested
TIMING REQUIREMENTS(1)
VCCA = 3.3 V ± 0.3 V
over recommended operating free-air temperature range (unless otherwise noted)
VCCB = 1.8 V
± 0.15 V
UNIT
MIN
MAX
Push-pull driving
60
1
SDIO_CMD
Open-drain driving
Data rate
Mbps
SDIO_CLK
50 MHz
Push-pull driving
SDIO_DATAx
60 Mbps
Push-pull driving
SDIO_CMD
17
1
ns
μs
ns
ns
Open-drain driving
tW
Pulse duration
SDIO_CLK
10
17
Push-pull driving
SDIO_DATAx
(1) Not production tested
10
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
SWITCHING CHARACTERISTICS(1)
VCCA = 2.5 V ± 0.2 V
over recommended operating free-air temperature range (unless otherwise noted)
VCCB = 1.8 V
± 0.15 V
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
TEST CONDITIONS
UNIT
MIN
MAX
Push-pull driving
7
7
SDIO_CMD_A
SDIO_CMD_B
SDIO_CMD_B
SDIO_CMD_A
Open-drain driving (H-to-L)
Open-drain driving (L-to-H)
Push-pull driving
1.1
30
510
7
Open-drain driving (H-to-L)
Open-drain driving (L-to-H)
Push-pull driving
1
30
1
7.5
515
6.5
7
tpd
ns
SDIO_CLK_A
SDIO_DATAx_A
SDIO_DATAx_B
Buffered input
Buffered input
Buffered input
SDIO_CLK_B
SDIO_DATAx_B
1
Push-pull driving
SDIO_DATAx_A
1
7
2-mA drive strength output
4-mA drive strength output
8-mA drive strength output
2-mA drive strength output
4-mA drive strength output
8-mA drive strength output
Switch-type output
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Open-drain driving
Push-pull driving
Push-pull driving
Open-drain driving
1
7.6
7
1
1
6.5
16
19
18
1
ns
μs
ns
μs
ns
ten
OE
OE
2-mA drive strength output
4-mA drive strength output
8-mA drive strength output
Switch-type outputs
17
16.5
16
1
tdis
1
15
1
5
SDIO_CMD_A rise time
trA
420
4.7
9.7
420
6
SDIO_DATAx_A rise time
SDIO_CMD_B rise time
1
15
0.5
1
trB
ns
ns
ns
SDIO_CLK_B rise time
Push-pull driving
SDIO_DATAx_B rise time
9.7
8.3
8.3
8.3
9.9
10.9
5.3
9.9
0.4
0.4
1.3
60
1
Push-pull driving
Open-drain driving
Push-pull driving
Push-pull driving
Open-drain driving
0.7
1.6
1
SDIO_CMD_A fall time
SDIO_DATAx_A fall time
SDIO_CMD_B fall time
tfA
1
1.6
0.5
1
tfB
SDIO_CLK_B fall time
SDIO_DATAx_B fall time
SDIO Ch-A to Ch-B skew
SDIO Ch-B to Ch-A skew
SDIO channel-to-clock skew
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Open-drain driving
tsk(O)
ns
SDIO_CMD
Mbps
Max data rate
SDIO_CLK
50 MHz
60 Mbps
Push-pull driving
SDIO_DATAx
(1) Not production tested
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
SWITCHING CHARACTERISTICS(1)
VCCA = 3.3 V ± 0.3 V
over recommended operating free-air temperature range (unless otherwise noted)
VCCB = 1.8 V
± 0.15 V
FROM
(INPUT)
TO
(OUTPUT)
PARAMETER
TEST CONDITIONS
UNIT
MIN
MAX
Push-pull driving
7
7
SDIO_CMD_A
SDIO_CMD_B
SDIO_CMD_B
SDIO_CMD_A
Open-drain driving (H-to-L)
Open-drain driving (L-to-H)
Push-pull driving
1.1
30
510
7
Open-drain driving (H-to-L)
Open-drain driving (L-to-H)
Push-pull driving
1
30
1
7.5
515
6.5
7
tpd
ns
SDIO_CLK_A
SDIO_DATAx_A
SDIO_DATAx_B
Buffered input
Buffered input
Buffered -nput
SDIO_CLK_B
SDIO_DATAx_B
1
Push-pull driving
SDIO_DATAx_A
1
7
2-mA drive strength output
4-mA drive strength output
8-mA drive strength output
2-mA drive strength output
4-mA drive strength output
8-mA drive strength output
Switch-type output
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Open-drain driving
Push-pull driving
Push-pull driving
Open-drain driving
1
7.6
7
1
1
6.5
16
19
ns
μs
ns
μs
ns
ten
OE
OE
19
1
2-mA drive strength output
4-mA drive strength output
8-mA drive strength output
Switch-type output
17
16
tdis
16
1
1
15
1
4.25
420
4.25
9.5
420
5.9
9.6
8.2
8.2
8.2
9.2
10.8
5.2
9.8
0.4
0.4
1.3
60
SDIO_CMD_A rise time
trA
SDIO_DATAx_A rise time
SDIO_CMD_B rise time
1
15
0.5
1
trB
ns
ns
ns
SDIO_CLK_B rise time
Push-pull driving
SDIO_DATAx_B rise time
Push-pull driving
Open-drain driving
Push-pull driving
Push-pull driving
Open-drain driving
0.7
1.6
1
SDIO_CMD_A fall time
SDIO_DATAx_A fall time
SDIO_CMD_B fall time
tfA
1
1.6
0.5
1
tfB
SDIO_CLK_B fall time
SDIO_DATAx_B fall time
SDIO Ch-A to Ch-B skew
SDIO Ch-B to Ch-A skew
SDIO Channel-to-Clock skew
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Push-pull driving
Open-drain driving
tsk(O)
ns
SDIO_CMD
Mbps
1
Max data rate
SDIO_CLK
50 MHz
60 Mbps
Push-pull driving
SDIO_DATAx
(1) Not production tested
12
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
OPERATING CHARACTERISTICS(1)
TA = 25°C
VCCA = VCCB
= 1.8 V
VCCA = VCCB
= 2.5 V
PARAMETER
TEST CONDITIONS
UNIT
Cpd input side
18.3
18.25
0.8
0.1
0.6
8.8
0.1
0.1
0.6
7.1
0.1
0.1
0.6
7.6
0.1
0.1
0.6
8.8
0.1
0.1
0.6
8.2
0.1
0.1
20.3
19.52
0.8
0.1
0.9
10.1
0.1
0.1
1
Enabled
Cpd output side
CL = 0,
f = 10 MHz,
tr = tf = 1 ns
DATAx and CMD
Cpd input side
pF
Disabled
Cpd output side
Cpd input side
Enabled
Cpd output side
Clock
CL = 0,
f = 10 MHz,
tr = tf = 1 ns
pF
pF
pF
pF
pF
Cpd input side
Disabled
Cpd output side
Cpd input side
Enabled
Cpd output side
2-mA buffer
CL = 0,
f = 10 MHz,
tr = tf = 1 ns
7.9
0.1
0.1
1.0
8.6
0.1
0.1
1
Cpd input side
Disabled
Cpd output side
Cpd input side
Enabled
Cpd output side
4-mA buffer
CL = 0,
f = 10 MHz,
tr = tf = 1 ns
Cpd input side
Disabled
Cpd output side
Cpd input side
Enabled
Cpd output side
8-mA buffer
CL = 0,
f = 10 MHz,
tr = tf = 1 ns
10.1
0.1
0.1
0.95
9.1
0.1
0.1
Cpd input side
Disabled
Cpd output side
Cpd input side
Enabled
Cpd output side
4-mA I/O
CL = 0,
f = 10 MHz,
tr = tf = 1 ns
Cpd input side
Disabled
Cpd output side
(1) Not production tested
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
13
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
TYPICAL CHARACTERISTICS
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
0.25
0.24
0.23
0.22
0.21
0.20
0.19
0.18
0.17
0.16
0.15
0.28
0.27
0.26
0.25
0.24
0.23
0.22
0.21
0.20
0.19
0.18
0.17
0.16
0.15
Switch Type
Switch Type
VCCA = VCCB = 1.8 V
VIN = 0.15 V
VCCA = VCCB = 2.6 V
VIN = 0.15 V
TA = 85°C
TA = 85°C
TA = 25°C
TA = 25°C
TA = -40°C
TA = -40°C
0
20 40 60 80 100 120 140 160 180 200 220
0
30 60 90 120 150 180 210 240 270 300
IOL (µA)
IOL (µA)
Figure 1.
Figure 2.
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT CURRENT
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
2-mA Buffer Type
VCCA = VCCB = 1.8 V
VIN = 0.0 V
2-mA Buffer Type
VCCA = VCCB = 2.6 V
VIN = 0.0 V
TA = 85°C
TA = 85°C
TA = 25°C
TA = 25°C
TA = -40°C
TA = -40°C
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
IOL (mA)
IOL (mA)
Figure 3.
Figure 4.
14
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
TYPICAL CHARACTERISTICS (continued)
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT CURRENT
0.15
0.14
0.13
0.12
0.11
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
0.15
0.14
0.13
0.12
0.11
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
4-mA Buffer Type
4-mA Buffer Type
VCCA = VCCB = 2.6 V
VIN = 0.0 V
VCCA = VCCB = 1.8 V
VIN = 0.0 V
TA = 85°C
TA = 85°C
TA = 25°C
TA = 25°C
TA = -40°C
TA = -40°C
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
IOL (mA)
IOL (mA)
Figure 5.
Figure 6.
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT CURRENT
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
8-mA Buffer Type
VCCA = VCCB = 1.8 V
VIN = 0.0 V
8-mA Buffer Type
VCCA = VCCB = 2.6 V
VIN = 0.0 V
TA = 85°C
TA = 85°C
TA = 25°C
TA = 25°C
TA = -40°C
TA = -40°C
0.0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 8.0
0.0 0.8 1.6 2.4 3.2 4.0 4.8 5.6 6.4 7.2 8.0
IOL (mA)
IOL (mA)
Figure 7.
Figure 8.
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
15
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
TYPICAL CHARACTERISTICS (continued)
HIGH-LEVEL OUTPUT VOLTAGE
HIGH-LEVEL OUTPUT VOLTAGE
vs
vs
HIGH-LEVEL OUTPUT CURRENT
HIGH-LEVEL OUTPUT CURRENT
1.81
1.80
1.79
1.78
1.77
1.76
1.75
1.74
1.73
1.72
1.71
1.70
2.61
2.60
2.59
2.58
2.57
2.56
2.55
2.54
2.53
2.52
2.51
2.50
Switch Type
Switch Type
VCCA = VCCB = 1.8 V
VIN = 1.8 V
VCCA = VCCB = 2.6 V
VIN = 2.6 V
TA = -40°C
TA = -40°C
TA = 25°C
TA = 25°C
TA = 85°C
TA = 85°C
-20 -18 -16 -14 -12 -10 -8
-6
-4
-2
0
-20 -18 -16 -14 -12 -10 -8
IOH (µA)
-6
-4
-2
0
IOH (µA)
Figure 9.
Figure 10.
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
HIGH-LEVEL OUTPUT CURRENT
2.61
2.60
2.59
2.58
2.57
2.56
2.55
2.54
2.53
2.52
2.51
2.50
1.81
1.80
1.79
1.78
1.77
1.76
1.75
1.74
1.73
1.72
1.71
1.70
1.69
1.68
2-mA Buffer Type
2-mA Buffer Type
VCCA = VCCB = 1.8 V
VIN = 1.8 V
VCCA = VCCB = 2.6 V
VIN = 2.6 V
TA = -40°C
TA = -40°C
TA = 25°C
TA = 25°C
TA = 85°C
TA = 85°C
-2.0 -1.8 -1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -0.4 -0.2 0.0
-2.0 -1.8 -1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -0.4 -0.2 0.0
IOH (mA)
IOH (mA)
Figure 11.
Figure 12.
16
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
TYPICAL CHARACTERISTICS (continued)
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
HIGH-LEVEL OUTPUT CURRENT
2.61
2.60
2.59
2.58
2.57
2.56
2.55
2.54
2.53
2.52
2.51
2.50
2.49
2.48
1.81
1.80 4-mA Buffer Type
1.79 VCCA = VCCB = 1.8 V
VIN = 1.8 V
4-mA Buffer Type
VCCA = VCCB = 2.6 V
VIN = 2.6 V
1.78
1.77
1.76
1.75
1.74
1.73
1.72
1.71
1.70
1.69
1.68
1.67
1.66
1.65
1.64
1.63
TA = -40°C
TA = -40°C
TA = 25°C
TA = 25°C
TA = 85°C
TA = 85°C
-4.0 -3.6 -3.2 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.0
-4.0 -3.6 -3.2 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.0
IOH (mA)
IOH (mA)
Figure 13.
Figure 14.
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
HIGH-LEVEL OUTPUT CURRENT
2.61
1.81
8-mA Buffer Type
VCCA = VCCB = 2.6 V
VIN = 2.6 V
8-mA Buffer Type
VCCA = VCCB = 1.8 V
VIN = 1.8 V
1.79
1.77
1.75
1.73
1.71
1.69
1.67
1.65
1.63
1.61
1.59
1.57
1.55
2.59
2.57
2.55
2.53
2.51
2.49
2.47
2.45
2.43
2.41
TA = -40°C
TA = -40°C
TA = 25°C
TA = 25°C
TA = 85°C
TA = 85°C
-8.0 -7.2 -6.4 -5.6 -4.8 -4.0 -3.2 -2.4 -1.6 -0.8 0.0
-8.0 -7.2 -6.4 -5.6 -4.8 -4.0 -3.2 -2.4 -1.6 -0.8 0.0
IOH (mA)
IOH (mA)
Figure 15.
Figure 16.
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
17
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
TYPICAL CHARACTERISTICS (continued)
PROPAGATION DELAY TIME (HIGH TO LOW)
PROPAGATION DELAY TIME (LOW TO HIGH)
vs
vs
LOAD CAPACITANCE
LOAD CAPACITANCE
6
5
4
3
2
1
0
6
5
4
3
2
1
0
Switch Type
TA = -40°C
Switch Type
TA = -40°C
VCCA = VCCB = 1.8 V
VCCA = VCCB = 1.8 V
VCCA = VCCB = 2.6 V
VCCA = VCCB = 2.6 V
0
10
20
30
40
50
60
0
10
20
30
40
50
60
CL (pF)
CL (pF)
Figure 17.
Figure 18.
PROPAGATION DELAY TIME (HIGH TO LOW)
PROPAGATION DELAY TIME (LOW TO HIGH)
vs
vs
LOAD CAPACITANCE
LOAD CAPACITANCE
6
5
4
3
2
1
0
6
5
4
3
2
1
0
Switch Type
Switch Type
TA = 25°C
TA = 25°C
VCCA = VCCB = 1.8 V
VCCA = VCCB = 1.8 V
VCCA = VCCB = 2.6 V
VCCA = VCCB = 2.6 V
0
10
20
30
40
50
60
0
10
20
30
40
50
60
CL (pF)
CL (pF)
Figure 19.
Figure 20.
18
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
TYPICAL CHARACTERISTICS (continued)
PROPAGATION DELAY TIME (HIGH TO LOW)
PROPAGATION DELAY TIME (LOW TO HIGH)
vs
vs
LOAD CAPACITANCE
LOAD CAPACITANCE
6
5
6
5
4
3
2
1
0
Switch Type
TA = 85°C
Switch Type
TA = 85°C
VCCA = VCCB = 1.8 V
4
3
2
1
0
VCCA = VCCB = 1.8 V
VCCA = VCCB = 2.6 V
VCCA = VCCB = 2.6 V
0
10
20
30
40
50
60
0
10
20
30
40
50
60
CL (pF)
CL (pF)
Figure 21.
Figure 22.
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
19
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
Typical Application Wiring for TWL1200-Q1 When Connecting to the WL1271
Table 2. WL1271+TWL1200-Q1 Interface
HOST
(MSM)
BALL
NO.
BALL
NO.
WL1271
COB
PIN NAME
TYPE
TYPE
PIN NAME
VCCA
C4
D4
B2
C2
C1
B1
A2
A1
D1
D2
E1
E2
G1
F1
G2
F2
F3
A3
B3
G3
G4
A4
B4
Power (3 V)
Power (3 V)
I/O ↔
I/O ↔
I/O ↔
I/O ↔
I/O ↔
I →
Power (1.8 V)
Power (1.8 V)
I/O ↔
I/O ↔
I/O ↔
I/O ↔
I/O ↔
O →
C5
D5
B6
C6
C7
B7
A6
A7
D6
D7
E7
E6
G7
F7
G6
F6
F5
A5
B5
G5
F4
D3
E3
E4
E5
VCCB
VCCB
VCCA
SDIO_DATA0_A
SDIO_DATA1_A
SDIO_DATA2_A
SDIO_DATA3_A
SDIO_CMD_A
SDIO_CLK_A
WLAN_EN_A
WLAN_IRQ_A
CLK_REQ_A
BT_EN_A
SDIO_DATA0_B
SDIO_DATA1_B
SDIO_DATA2_B
SDIO_DATA3_B
SDIO_CMD_B
SDIO_CLK_B
WLAN_EN_B
WLAN_IRQ_B
CLK_REQ_B
BT_EN_B
K4
J4
J3
J5
L3
M3
J2
I →
O →
O ←
I ←
G4
F5
O ←
I ←
I →
O →
G5
G7
E11
G8
G11
F6
TWL1200-
Q1
BT_UART_RX_A
BT_UART_CTS_A
BT_UART_TX_A
BT_UART_RTS_A
AUDIO_IN_A
AUDIO_CLK_A
AUDIO_F-SYN_A
AUDIO_OUT_A
SLOW_CLK_A
AUD_DIR
I →
O →
BT_UART_RX_B
BT_UART_CTS_B
BT_UART_TX_B
BT_UART_RTS_B
AUDIO_IN_B
AUDIO_CLK_B
AUDIO_F-SYN_B
AUDIO_OUT_B
SLOW_CLK_B
GND
I →
O →
O ←
I ←
O ←
I ←
I →
I/O ↔
I/O ↔
I/O ↔
I ←
I/O ↔
I/O ↔
O ←
F8
H11
F7
I →
O →
K9
I →
GND
OE
Active low
GND
GND
GND
20
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
PARAMETER MEASUREMENT INFORMATION
2 × V
CCO
TEST
S1
S1
R
L
Open
GND
t
Open
pd
From Output
Under Test
t
t
/t
/t
2 × V
CCO
GND
PLZ PZL
PHZ PZH
C
L
R
L
(see Note A)
t
w
LOAD CIRCUIT FOR
BUFFER-TYPE OUTPUTS
V
CCI
V
CCI
/2
V
CCI
/2
Input
C
L
V
TP
R
L
V
CCO
0 V
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
2 kΩ
2 kΩ
2 kΩ
0.15 V
0.15 V
0.3 V
15 pF
15 pF
15 pF
VOLTAGE WAVEFORMS
PULSE DURATION
V
CCA
Output
Control
(low-level
enabling)
V /2
CCA
V
CCA
/2
t
0 V
t
PZL
PLZ
V
V
CCO
Output
Waveform 1
V
CCI
V
/2
/2
CCO
Input
V
CCI
/2
V
CCI
/2
V
+ V
OL
TP
S1 at 2 × V
CCO
OL
0 V
(see Note B)
t
t
PZH
PHZ
t
t
PHL
PLH
Output
Waveform 2
S1 at GND
V
OH
V
OH
V
OH
− V
TP
V
CCO
Output
V /2
CCO
V
CCO
/2
(see Note B)
0 V
V
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
NOTES: A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRRv10 MHz, Z = 50 Ω, dv/dt ≥ 1 V/ns.
O
D. The outputs are measured one at a time, with one transition per measurement.
E.
F.
G.
H.
I.
t
t
t
V
V
and t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PLH
PHZ
are the same as t
PZH
en
are the same as t .
pd
PHL
is the V associated with the input port.
CC
CCI
is the V associated with the output port.
CCO
CC
Figure 23. Push-Pull Buffered Direction-Control Load Circuit and Voltage Waveform
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
21
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
PARAMETER MEASUREMENT INFORMATION (continued)
V
CCI
V
CCO
V
CCI
V
CCO
DUT
DUT
IN
IN
OUT
OUT
1 MW
1 MW
15 pF
15 pF
DATA RATE, PULSE DURATION, PROPAGATION DELAY,
OUTPUT RISE AND FALL TIME MEASUREMENT USING
AN OPEN-DRAIN DRIVER
DATA RATE, PULSE DURATION, PROPAGATION DELAY,
OUTPUT RISE AND FALL TIME MEASUREMENT USING
A PUSH-PULL DRIVER
From Output
Under Test
15 pF
1 MW
LOAD CIRCUIT FOR ENABLE/DISABLE TIME MEASUREMENT −
SWITCH-TYPE SDIOs
t
w
V
CCI
V
CCI
/2
V
CCI
/2
Input
0 V
VOLTAGE WAVEFORMS
PULSE DURATION
OE
V
CCI
Input
Input
V
CCI
/2
V
CCI
/2
0 V
t
t
PLH
PHL
V
OH
0.9 y V
CCO
Output
Output
V /2
CCO
V
/2
CCO
0.1 y V
CCO
V
OL
t
en
t
dis
t
f
t
r
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
A. C includes probe and jig capacitance.
L
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRRv10 MHz, Z = 50 Ω, dv/dt ≥ 1 V/ns.
O
D. The outputs are measured one at a time, with one transition per measurement.
E.
F.
G.
H.
I.
t
t
t
V
V
and t
and t
and t
are the same as t
.
dis
.
PLZ
PZL
PLH
PHZ
are the same as t
PZH
en
are the same as t .
pd
PHL
is the V associated with the input port.
CC
CCI
is the V associated with the output port.
CCO
CC
J. All parameters and waveforms are not applicable to all devices.
Figure 24. Auto-Direction-Control Load Circuit and Voltage Waveform
22
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
APPLICATION CIRCUIT EXAMPLES
VCCB
VCCA
C
C
TWL1200
CLK_REQ(A)
C4
E1
E7
VCCA
VCCA
VCCB
VCCB
D4
C5
D5
CLK_REQ(B)
A1
A7
SDIO_CLK(A)
SDIO_CLK(B)
WLAN_SDIO30_CLK
WLAN_SDIO_CLK
F3
F5
BT_PCM30_DO
BT_PCM_DO
AUDIO_IN(A)
AUDIO_IN(B)
A2
A6
SDIO_CMD(A)
SDIO_CMD(B)
WLAN_SDIO30_CMD
WLAN_SDIO_CMD
A3
A5
BT_PCM30_CLK
BT_PCM_CLK
AUDIO_CLK(A)
AUDIO_CLK(B)
B2
C2
C1
B1
WLAN_SDIO30_D0
WLAN_SDIO30_D1
WLAN_SDIO30_D2
WLAN_SDIO30_D3
SDIO_DATA0(A)
SDIO_DATA1(A)
SDIO_DATA2(A)
SDIO_DATA3(A)
B3
B5
BT_PCM30_SYNC
BT_PCM_SYNC
AUDIO_F-SYN(A)
AUDIO_F-SYN(B)
B6
C6
C7
B7
A4
AUD_DIR
SDIO_DATA0(B)
SDIO_DATA1(B)
SDIO_DATA2(B)
SDIO_DATA3(B)
WLAN_SDIO_D0
WLAN_SDIO_D1
WLAN_SDIO_D2
WLAN_SDIO_D3
G3
G5
BT_PCM30_DI
BT_PCM_DI
AUDIO_OUT(A)
AUDIO_OUT(B)
E2
E6
G4
F4
BT_EN(A)
BT_EN(B)
BT_EN30
BT_EN
SLOW_CLK(A)
SLOW_CLK(B)
CLK32_COMBO
CLK32_COMBO18
F1
F7
D1
D6
BT_UART_CTS(A)
BT_UART_CTS(B)
BT_UART30_RTS
BT_UART_RTS
WLAN_EN(A)
WLAN_EN(B)
WLAN_EN30
WLAN_EN
BT_IRQ30
BT_UART30_CTS
BT_UART_CTS
D2
D7
F2
F6
WLAN_IRQ(A)
WLAN_IRQ(B)
WLAN_IRQ30
WLAN_IRQ
BT_UART_RTS(A)
BT_UART_RTS(B)
G1
G7
BT_UART30_TXD
BT_UART_TXD
BT_UART_RX(A)
BT_UART_RX(B)
D3
E3
E4
E5
G2
G6
GND
GND
GND
GND
BT_UART30_RXD
BT_UART_RXD
BT_UART_TX(A)
BT_UART_TX(B)
B4
OE
R
Figure 25. Application Circuit Example, OE Connection With Audio_CLK and Audio_F-SYNC Channels
Established From B Side to A Side
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
23
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
VCCB
VCCA
C
C
TWL1200
C4
D4
C5
D5
E1
E7
CLK_REQ(A)
CLK_REQ(B)
VCCA
VCCA
VCCB
VCCB
A1
A7
SDIO_CLK(A)
SDIO_CLK(B)
WLAN_SDIO30_CLK
WLAN_SDIO_CLK
F3
F5
BT_PCM30_DO
BT_PCM_DO
AUDIO_IN(A)
AUDIO_IN(B)
A2
A6
SDIO_CMD(A)
SDIO_CMD(B)
WLAN_SDIO30_CMD
WLAN_SDIO_CMD
A3
A5
BT_PCM30_CLK
BT_PCM_CLK
AUDIO_CLK(A)
AUDIO_CLK(B)
B2
C2
C1
B1
WLAN_SDIO30_D0
WLAN_SDIO30_D1
WLAN_SDIO30_D2
WLAN_SDIO30_D3
SDIO_DATA0(A)
SDIO_DATA1(A)
SDIO_DATA2(A)
SDIO_DATA3(A)
VCCA
B3
B5
BT_PCM30_SYNC
BT_PCM_SYNC
AUDIO_F-SYN(A)
AUDIO_F-SYN(B)
R
B6
C6
C7
B7
A4
AUD_DIR
SDIO_DATA0(B)
SDIO_DATA1(B)
SDIO_DATA2(B)
SDIO_DATA3(B)
WLAN_SDIO_D0
WLAN_SDIO_D1
WLAN_SDIO_D2
WLAN_SDIO_D3
G3
G5
R
BT_PCM30_DI
BT_PCM_DI
AUDIO_OUT(A)
AUDIO_OUT(B)
E2
E6
G4
F4
BT_EN(A)
BT_EN(B)
BT_EN30
BT_EN
SLOW_CLK(A)
SLOW_CLK(B)
CLK32_COMBO
CLK32_COMBO18
F1
F7
D1
D6
BT_UART_CTS(A)
BT_UART_CTS(B)
BT_UART30_RTS
BT_UART_RTS
WLAN_EN(A)
WLAN_EN(B)
WLAN_EN30
WLAN_EN
D2
D7
F2
F6
WLAN_IRQ(A)
WLAN_IRQ(B)
WLAN_IRQ30
WLAN_IRQ
BT_UART30_CTS
BT_UART_CTS
BT_UART_RTS(A)
BT_UART_RTS(B)
G1
G7
BT_UART30_TXD
BT_UART_TXD
BT_UART_RX(A)
BT_UART_RX(B)
D3
E3
E4
E5
G2
G6
GND
GND
GND
GND
BT_UART30_RXD
BT_UART_RXD
BT_UART_TX(A)
BT_UART_TX(B)
B4
BT_WLAN_LEVEL_EN
VCCA
OE
R
Figure 26. Application Circuit Example, With Voltage Divider for AUD_DIR Connection
24
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
www.ti.com
SCES832A –MARCH 2012–REVISED MARCH 2012
PRINCIPLES OF OPERATION
Applications
The TWL1200-Q1 device has been designed to bridge the digital-switching compatibility gap between two
voltage nodes to interface successfully the logic threshold levels between a host processor and the Texas
Instruments Wi-Link-6 WLAN/BT/FM products. The device is intended to be used in a point-to-point topology
when interfacing these devices that may or may not be operating at different interface voltages.
Architecture
The BT/UART and PCM/Audio subsystem interfaces consist of a fully-buffered voltage translator design that has
its output transistors to source and sink current optimized for drive strength.
The SDIO lines constitute a semi-buffered auto-direction-sensing based translator architecture (see Figure 27)
that does not require a direction-control signal to control the direction of data flow of the A to B ports (or from B
to A ports).
VCCA
VCCB
One-Shot
One-Shot
R1
T1
R2
Translator
T2
SDIO-DATAx(A)
SDIO-DATAx(B)
Bias
N1
One-Shot
T3
Translator
One-Shot
T4
Figure 27. Architecture of an SDIO Switch-Type Cell
Each of these bidirectional SDIO channels independently determines the direction of data flow without a
direction-control signal. Each I/O pin can be automatically reconfigured as either an input or an output, which is
how this auto-direction feature is realized.
The following two key circuits are employed to facilitate the switch-type voltage-translation function:
1. Integrated pullup resistors to provide dc-bias and drive capabilities
2. An N-channel pass-gate transistor topology (with a high RON of approximately 300 Ω) that ties the A-port to
the B-port
3. Output one-shot (O.S.) edge-rate accelerator circuitry to detect and accelerate rising edges on the A or B
ports
Copyright © 2012, Texas Instruments Incorporated
Submit Documentation Feedback
25
Product Folder Link(s): TWL1200-Q1
TWL1200-Q1
SCES832A –MARCH 2012–REVISED MARCH 2012
www.ti.com
For bidirectional voltage translation, pullup resistors are included on the device for dc current-sourcing capability.
The VGATE gate bias of the N-channel pass transistor is set at a level that optimizes the switch characteristics for
maximum data rate as well as minimal static supply leakage. Data can flow in either direction without guidance
from a control signal.
The edge-rate acceleration circuitry speeds up the output slew rate by monitoring the input edge for transitions,
helping maintain the data rate through the device.
During a low-to-high rising edge of a signal, the O.S. circuits turn on the PMOS transistors (T1, T3) and its
associated driver output resistance of the driver is decreased to approximately 50 Ω to 70 Ω during this
acceleration phase to increase the current drive capability of the driver for approximately 30 ns or 95% of the
input edge, whichever occurs first. This edge-rate acceleration provides high ac drive by bypassing the internal
pullup resistors during the low-to-high transition to speed up the rising-edge signal.
During a high-to-low signal falling-edge, the O.S. circuits turn on the NMOS transistors (T2, T4) and its associated
driver output resistance of the driver is decreased to approximately 50 Ω to 70 Ω during this acceleration phase
to increase the current drive capability of the driver for approximately 30 ns or 95% of the input edge, whichever
occurs first.
To minimize dynamic ICC and the possibility of signal contention, the user should wait for the O.S. circuit to turn
off before applying a signal in the opposite direction. The worst-case duration is equal to the minimum pulse-
duration number provided in the Timing Requirements section of this data sheet.
Once the O.S. is triggered and switched off, both the A and B ports must go to the same state (that is, both High
or both Low) for the one-shot to trigger again. In a dc state, the output drivers maintain a Low state through the
pass transistor. The output drivers maintain a High through the smart pullup resistors that dynamically change
value based on whether a Low or a High is being passed through the SDIO lines, as follows:
•
•
•
RPU1 and RPU2 values are 25 kΩ when the output is driving a low.
RPU1 and RPU2 values are 4 kΩ when the output is driving a high.
RPU1 and RPU2 values are 70 kΩ when the device is disabled via the OE pin or by pulling the either VCCA or
VCCB to 0 V.
The reason for using these smart pullup resistors is to allow the TWL1200-Q1 to realize a lower static power
consumption (when the I/Os are low), support lower VOL values for the same size pass-gate transistor, and
improved simultaneous switching performance.
Input Driver Requirements
The continuous dc-current sinking capability is determined by the external system-level driver interfaced to the
SDIO pins. Because the high bandwidth of these bidirectional SDIO circuits necessitates a port quickly changing
from an input to an output (and vice-vera), they have a modest dc-current sourcing capability of hundreds of
microamps, as determined by the smart pullup resistor values.
The fall time (tfA, tfB) of a signal depends on the edge rate and output impedance of the external device driving
the SDIO I/Os, as well as the capacitive loading on these lines.
Similarly, the tpd and maximum data rates also depend on the output impedance of the external driver. The
values for tfA, tfB, tpd, and maximum data rates in the data sheet assume that the output impedance of the
external driver is less than 50 Ω.
Output Load Considerations
TI recommends careful PCB layout practices with short PCB trace lengths to avoid excessive capacitive loading
and to ensure that proper O.S. triggering takes place. PCB signal trace-lengths should be kept short enough
such that the round trip delay of any reflection is less than the one-shot duration. This improves signal integrity
by ensuring that any reflection sees a low impedance at the driver. The O.S. circuits have been designed to stay
on for approximately 30 ns. The maximum capacitance of the lumped load that can be driven also depends
directly on the one-shot duration. With very heavy capacitive loads, the one-shot can time-out before the signal is
driven fully to the positive rail. The O.S. duration has been set to best optimize trade-offs between dynamic ICC
,
load driving capability, and maximum bit-rate considerations. Both PCB trace length and connectors add to the
capacitance that the TWL1200-Q1 SDIO output sees, so it is recommended that this lumped-load capacitance be
considered and kept below 75 pF to avoid O.S. retriggering, bus contention, output signal oscillations, or other
adverse system-level affects.
26
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Product Folder Link(s): TWL1200-Q1
PACKAGE OPTION ADDENDUM
www.ti.com
4-Apr-2012
PACKAGING INFORMATION
Status (1)
Eco Plan (2)
MSL Peak Temp (3)
Samples
Orderable Device
Package Type Package
Drawing
Pins
Package Qty
Lead/
Ball Finish
(Requires Login)
TWL1200IPFBRQ1
ACTIVE
TQFP
PFB
48
1000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-3-260C-168 HR
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TWL1200-Q1 :
Catalog: TWL1200
•
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
•
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
TWL1200IPFBRQ1
TQFP
PFB
48
1000
330.0
16.4
9.6
9.6
1.5
12.0
16.0
Q2
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
TQFP PFB 48
SPQ
Length (mm) Width (mm) Height (mm)
367.0 367.0 38.0
TWL1200IPFBRQ1
1000
Pack Materials-Page 2
MECHANICAL DATA
MTQF019A – JANUARY 1995 – REVISED JANUARY 1998
PFB (S-PQFP-G48)
PLASTIC QUAD FLATPACK
0,27
0,17
0,50
M
0,08
36
25
37
24
48
13
0,13 NOM
1
12
5,50 TYP
7,20
SQ
Gage Plane
6,80
9,20
SQ
8,80
0,25
0,05 MIN
0°–7°
1,05
0,95
0,75
0,45
Seating Plane
0,08
1,20 MAX
4073176/B 10/96
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-026
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Audio
Applications
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
www.ti.com/security
Medical
Logic
Security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense www.ti.com/space-avionics-defense
microcontroller.ti.com
www.ti-rfid.com
Video and Imaging
www.ti.com/video
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community
e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00293/img/page/TWL2214CAPFB_1773986_files/TWL2214CAPFB_1773986_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00293/img/page/TWL2214CAPFB_1773986_files/TWL2214CAPFB_1773986_2.jpg)
TWL2214CAPFBR
IC 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQFP48, PLASTIC, TQFP-48, Power Management Circuit
TI
©2020 ICPDF网 联系我们和版权申明