MAX3232EIPWE4 [TI]
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION; 3V至5.5V多通道RS - 232线路驱动器/接收器【 15千伏IEC ESD保护型号: | MAX3232EIPWE4 |
厂家: | TEXAS INSTRUMENTS |
描述: | 3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION |
文件: | 总18页 (文件大小:353K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MAX3232E
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV IEC ESD PROTECTION
www.ti.com
SLLS664A–AUGUST 2005–REVISED APRIL 2007
FEATURES
APPLICATIONS
•
•
•
•
•
•
Battery-Powered Systems
PDAs
Notebooks
Laptops
Palmtop PCs
Hand-Held Equipment
•
ESD Protection for RS-232 Bus Pins
–
–
–
±15 kV (HBM)
±8 kV (IEC61000-4-2, Contact Discharge)
±15 kV (IEC61000-4-2, Air-Gap Discharge)
•
Meets or Exceeds the Requirements of
TIA/EIA-232-F and ITU v.28 Standards
•
•
•
•
•
•
•
Operates With 3-V to 5.5-V VCC Supply
Operates up to 250 kbit/s
D, DB, DW, OR PW PACKAGE
(TOP VIEW)
Two Drivers and Two Receivers
Low Supply Current . . . 300 µA Typ
External Capacitors . . . 4 × 0.1 µF
Accepts 5-V Logic Input With 3.3-V Supply
C1+
V+
V
CC
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
GND
C1−
DOUT1
RIN1
C2+
C2−
ROUT1
DIN1
Pin Compatible to Alternative High-Speed
Device (1 Mbit/s)
V−
DOUT2
RIN2
DIN2
–
SNx5C3232
ROUT2
DESCRIPTION/ORDERING INFORMATION
ORDERING INFORMATION
TA
PACKAGE(1)(2)
ORDERABLE PART NUMBER
MAX3232ECD
TOP-SIDE MARKING
Tube of 40
SOIC – D
MAX3232EC
MAX3232EC
MP232EC
MP232EC
MAX3232EI
MAX3232EI
MP232EI
Reel of 2500
Tube of 40
Reel of 2000
Tube of 80
Reel of 2000
Tube of 90
Reel of 2000
Tube of 40
Reel of 2500
Tube of 40
Reel of 2000
Tube of 80
Reel of 2000
Tube of 90
Reel of 2000
MAX3232ECDR
MAX3232ECDW
MAX3232ECDWR
MAX3232ECDB
MAX3232ECDBR
MAX3232ECPW
MAX3232ECPWR
MAX3232EID
SOIC – DW
SSOP – DB
TSSOP – PW
SOIC – D
–0°C to 70°C
MAX3232EIDR
MAX3232EIDW
SOIC – DW
SSOP – DB
TSSOP – PW
MAX3232EIDWR
MAX3232EIDB
–40°C to 85°C
MAX3232EIDBR
MAX3232EIPW
MP232EI
MAX3232EIPWR
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005–2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
MAX3232E
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV IEC ESD PROTECTION
www.ti.com
SLLS664A–AUGUST 2005–REVISED APRIL 2007
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
The MAX3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with
±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the
requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication
controller and the serial-port connector. The charge pump and four small external capacitors allow operation
from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum
of 30-V/µs driver output slew rate.
FUNCTION TABLES
ABC
EACH DRIVER(1)
INPUT
DIN
OUTPUT
DOUT
L
H
L
H
(1) H = high level, L = low level
EACH RECEIVER(1)
INPUT
RIN
OUTPUT
ROUT
L
H
H
L
Open
H
(1) H = high level, L = low level,
Open = input disconnected or
connected driver off
LOGIC DIAGRAM (POSITIVE LOGIC)
11
10
12
9
14
DIN1
DIN2
DOUT1
DOUT2
RIN1
7
13
8
ROUT1
ROUT2
RIN2
2
Submit Documentation Feedback
MAX3232E
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV IEC ESD PROTECTION
www.ti.com
SLLS664A–AUGUST 2005–REVISED APRIL 2007
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
MIN
–0.3
–0.3
0.3
MAX
6
UNIT
VCC
V+
Supply voltage range(2)
V
V
V
V
Positive output supply voltage range(2)
Negative output supply voltage range(2)
Supply voltage difference(2)
7
V–
–7
13
V+
–
V–
Drivers
–0.3
–25
6
25
V
V
V
V
VI
Input voltage range
Output voltage range
Receivers
Drivers
–13.2
13.2
VO
Receivers
D package
DB package
DW package
PW package
–0.3 VCC + 0.3
73
82
θJA
Package thermal impedance(3)(4)
°C/W
57
108
150
TJ
Operating virtual junction temperature
Storage temperature range
°C
°C
Tstg
–65
150
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to network GND.
(3) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions(1)
See Figure 4
MIN
NO
M
MAX
UNIT
VCC = 3.3 V
VCC = 5 V
VCC = 3.3 V
VCC = 5 V
DIN
3
4.5
2
3.3
5
3.6
5.5
5.5
5.5
0.8
25
Supply voltage
V
V
VIH Driver high-level input voltage
VIL Driver low-level input voltage
DIN
2.4
0
V
V
VI
Receiver input voltage
–25
0
MAX3232EC
MAX3232EI
70
TA Operating free-air temperature
°C
–40
85
(1) Test conditions are C1–C4 = 0.1 µF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 µF, C2–C4 = 0.33 µF at VCC = 5 V ± 0.5 V.
Electrical Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 4)
PARAMETER
Supply current
TEST CONDITIONS
No load, VCC = 3.3 V or 5 V
MIN TYP(2) MAX
0.3
UNIT
ICC
1
mA
(1) Test conditions are C1–C4 = 0.1 µF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 µF, C2–C4 = 0.33 µF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
3
Submit Documentation Feedback
MAX3232E
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV IEC ESD PROTECTION
www.ti.com
SLLS664A–AUGUST 2005–REVISED APRIL 2007
DRIVER SECTION
Electrical Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 4)
PARAMETER
TEST CONDITIONS
MIN
5
TYP(2)
5.4
MAX
UNIT
V
VOH
VOL
IIH
High-level output voltage
Low-level output voltage
High-level input current
Low-level input current
DOUT at RL = 3 kΩ to GND,
DIN = GND
DIN = VCC
DOUT at RL = 3 kΩ to GND,
VI = VCC
–5
–5.4
V
±0.01
±0.01
±1
±1
µA
µA
IIL
VI at GND
VCC = 3.6 V,
VO = 0 V
VO = 0 V
VO = ±2 V
(3)
IOS
rO
Short-circuit output current
Output resistance
±35
±60
mA
VCC = 5.5 V,
VCC, V+, and V– = 0 V,
300
10M
Ω
(1) Test conditions are C1–C4 = 0.1 µF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 µF, C2–C4 = 0.33 µF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
(3) Short-circuit durations should be controlled to prevent exceeding the device absolute power dissipation ratings, and not more than one
output should be shorted at a time.
Switching Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 4)
PARAMETER
TEST CONDITIONS
MIN TYP(2)
MAX
UNIT
CL = 1000 pF,
One DOUT switching,
RL = 3 kΩ,
See Figure 1
Maximum data rate
150
250
300
kbit/s
CL = 150 pF to 2500 pF,
See Figure 2
RL = 3 kΩ to 7 kΩ,
tsk(p)
Pulse skew(3)
ns
CL = 150 pF to 1000 pF
CL = 150 pF to 2500 pF
6
4
30
30
Slew rate, transition region
(see Figure 1)
RL = 3 kΩ to 7 kΩ,
VCC = 3.3 V
SR(tr)
V/µs
(1) Test conditions are C1–C4 = 0.1 µF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 µF, C2–C4 = 0.33 µF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
(3) Pulse skew is defined as |tPLH – tPHL| of each channel of the same device.
4
Submit Documentation Feedback
MAX3232E
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV IEC ESD PROTECTION
www.ti.com
SLLS664A–AUGUST 2005–REVISED APRIL 2007
RECEIVER SECTION
Electrical Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 4)
PARAMETER
High-level output voltage
Low-level output voltage
TEST CONDITIONS
IOH = –1 mA
MIN
TYP(2)
MAX
UNIT
V
VOH
VOL
VCC – 0.6
VCC – 0.1
IOL = 1.6 mA
VCC = 3.3 V
VCC = 5 V
0.4
2.4
2.4
V
1.5
1.8
1.2
1.5
0.3
5
VIT+
Positive-going input threshold voltage
Negative-going input threshold voltage
V
V
VCC = 3.3 V
VCC = 5 V
0.6
0.8
VIT–
Vhys
ri
Input hysteresis (VIT+ – VIT–
)
V
Input resistance
VI = ±3 V to ±25 V
3
7
kΩ
(1) Test conditions are C1–C4 = 0.1 µF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 µF, C2–C4 = 0.33 µF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
Switching Characteristics(1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Figure 3)
PARAMETER
Propagation delay time, low- to high-level output
Propagation delay time, high- to low-level output
Pulse skew(3)
TEST CONDITIONS
TYP(2)
300
UNIT
ns
tPLH
tPHL
tsk(p)
CL = 150 pF
300
ns
300
ns
(1) Test conditions are C1–C4 = 0.1 µF at VCC = 3.3 V ± 0.3 V; C1 = 0.047 µF, C2–C4 = 0.33 µF at VCC = 5 V ± 0.5 V.
(2) All typical values are at VCC = 3.3 V or VCC = 5 V, and TA = 25°C.
(3) Pulse skew is defined as |tPLH – tPHL| of each channel of the same device.
5
Submit Documentation Feedback
MAX3232E
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV IEC ESD PROTECTION
www.ti.com
SLLS664A–AUGUST 2005–REVISED APRIL 2007
PARAMETER MEASUREMENT INFORMATION
3 V
0 V
Input
1.5 V
1.5 V
RS-232
Output
Generator
(see Note B)
50 Ω
t
t
C
L
THL
TLH
R
L
(see Note A)
V
V
OH
3 V
−3 V
3 V
−3 V
Output
TLH
OL
TEST CIRCUIT
VOLTAGE WAVEFORMS
6 V
or t
SR(tr) +
t
THL
NOTES: A. C includes probe and jig capacitance.
L
B. The pulse generator has the following characteristics: PRR = 250 kbit/s, Z = 50 Ω, 50% duty cycle, t ≤ 10 ns, t ≤ 10 ns.
O
r
f
Figure 1. Driver Slew Rate
3 V
0 V
RS-232
Output
1.5 V
1.5 V
Input
Generator
(see Note B)
50 Ω
C
L
t
t
PHL
PLH
R
L
(see Note A)
V
V
OH
50%
50%
Output
OL
TEST CIRCUIT
NOTES: A. C includes probe and jig capacitance.
VOLTAGE WAVEFORMS
L
B. The pulse generator has the following characteristics: PRR = 250 kbit/s, Z = 50 Ω, 50% duty cycle, t ≤ 10 ns, t ≤ 10 ns.
O
r
f
Figure 2. Driver Pulse Skew
3 V
Input
1.5 V
1.5 V
−3 V
Output
Generator
(see Note B)
50 Ω
t
t
PHL
PLH
C
L
(see Note A)
V
V
OH
50%
50%
Output
OL
TEST CIRCUIT
VOLTAGE WAVEFORMS
NOTES: A. C includes probe and jig capacitance.
L
B. The pulse generator has the following characteristics: Z = 50 Ω, 50% duty cycle, t ≤ 10 ns, t ≤ 10 ns.
O
r
f
Figure 3. Receiver Propagation Delay Times
6
Submit Documentation Feedback
MAX3232E
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER
WITH ±15-kV IEC ESD PROTECTION
www.ti.com
SLLS664A–AUGUST 2005–REVISED APRIL 2007
APPLICATION INFORMATION
1
2
3
4
16
V
CC
C1+
V+
+
−
C
BYPASS
= 0.1µF
+
−
15
14
GND
C1
+
−
†
C3
DOUT1
C1−
C2+
C2−
13
RIN1
+
−
5 kΩ
C2
5
6
12
11
ROUT1
DIN1
V−
−
+
C4
7
8
10
9
DOUT2
RIN2
DIN2
ROUT2
5 kΩ
†
C3 can be connected to V or GND.
CC
NOTES: A. Resistor values shown are nominal.
B. Nonpolarized ceramic capacitors are acceptable. If polarized tantalum or electrolytic capacitors are used, they should be
connected as shown.
V
CC
vs CAPACITOR VALUES
V
CC
C1
C2, C3, C4
3.3 V ± 0.3 V
5 V ± 0.5 V
3 V to 5.5 V
0.1 µF
0.047 µF
0.1 µF
0.1 µF
0.33 µF
0.47 µF
Figure 4. Typical Operating Circuit and Capacitor Values
7
Submit Documentation Feedback
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Applications
Audio
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/audio
Automotive
Broadband
Digital Control
Military
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
interface.ti.com
logic.ti.com
Logic
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
microcontroller.ti.com
www.ti.com/lpw
Low Power
Wireless
Telephony
www.ti.com/telephony
Video & Imaging
Wireless
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
PACKAGE OPTION ADDENDUM
www.ti.com
23-Apr-2007
PACKAGING INFORMATION
Orderable Device
MAX3232ECD
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOIC
D
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
MAX3232ECDB
MAX3232ECDBE4
MAX3232ECDBR
MAX3232ECDBRE4
MAX3232ECDE4
MAX3232ECDG4
MAX3232ECDR
MAX3232ECDRE4
MAX3232ECDRG4
MAX3232ECDW
MAX3232ECDWR
MAX3232ECPW
MAX3232ECPWE4
MAX3232ECPWR
MAX3232ECPWRE4
MAX3232EID
SSOP
SSOP
SSOP
SSOP
SOIC
DB
DB
DB
DB
D
80 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
80 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
D
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
DW
DW
PW
PW
PW
PW
D
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TSSOP
TSSOP
TSSOP
SOIC
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
MAX3232EIDB
SSOP
SSOP
SSOP
SSOP
SOIC
DB
DB
DB
DB
D
80 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
MAX3232EIDBE4
MAX3232EIDBR
MAX3232EIDBRE4
MAX3232EIDE4
MAX3232EIDG4
MAX3232EIDR
80 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
D
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
MAX3232EIDRE4
SOIC
D
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
23-Apr-2007
Orderable Device
MAX3232EIDRG4
MAX3232EIDW
Status (1)
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
Drawing
SOIC
D
16
16
16
16
16
16
16
16
16
2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
SOIC
DW
DW
PW
PW
PW
PW
PW
PW
40 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
MAX3232EIDWR
MAX3232EIPW
SOIC
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
TSSOP
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
MAX3232EIPWE4
MAX3232EIPWG4
MAX3232EIPWR
MAX3232EIPWRE4
MAX3232EIPWRG4
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
90 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
2000 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
30-Apr-2007
TAPE AND REEL INFORMATION
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
30-Apr-2007
Device
Package Pins
Site
Reel
Reel
A0 (mm)
B0 (mm)
K0 (mm)
P1
W
Pin1
Diameter Width
(mm) (mm) Quadrant
(mm)
330
330
330
330
330
330
330
330
(mm)
16
MAX3232ECDBR
MAX3232ECDR
MAX3232ECDWR
MAX3232ECPWR
MAX3232EIDBR
MAX3232EIDR
DB
D
16
16
16
16
16
16
16
16
MLA
MLA
TAI
8.2
6.5
6.6
10.3
10.7
5.6
2.5
12.1
2.7
12
2
16
16
16
12
16
16
16
12
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
16
DW
PW
DB
D
16
10.75
7.0
12
8
MLA
MLA
MLA
TAI
12
1.6
16
8.2
6.6
2.5
12
2
16
6.5
10.3
10.7
5.6
12.1
2.7
MAX3232EIDWR
MAX3232EIPWR
DW
PW
16
10.75
7.0
12
8
MLA
12
1.6
TAPE AND REEL BOX INFORMATION
Device
Package
Pins
Site
Length (mm) Width (mm) Height (mm)
MAX3232ECDBR
MAX3232ECDR
MAX3232ECDWR
MAX3232ECPWR
MAX3232EIDBR
MAX3232EIDR
DB
D
16
16
16
16
16
16
16
16
MLA
MLA
TAI
333.2
333.2
346.0
338.1
333.2
333.2
346.0
338.1
333.2
333.2
346.0
340.5
333.2
333.2
346.0
340.5
28.58
28.58
33.0
DW
PW
DB
D
MLA
MLA
MLA
TAI
20.64
28.58
28.58
33.0
MAX3232EIDWR
MAX3232EIPWR
DW
PW
MLA
20.64
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
30-Apr-2007
Pack Materials-Page 3
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
M
0,10
0,65
14
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°–8°
A
0,75
0,50
Seating Plane
0,10
0,15
0,05
1,20 MAX
PINS **
8
14
16
20
24
28
DIM
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
9,80
9,60
A MAX
A MIN
7,70
4040064/F 01/97
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Applications
Audio
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/audio
Automotive
Broadband
Digital Control
Military
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Interface
interface.ti.com
logic.ti.com
Logic
Power Mgmt
Microcontrollers
power.ti.com
Optical Networking
Security
www.ti.com/opticalnetwork
www.ti.com/security
microcontroller.ti.com
www.ti.com/lpw
Low Power
Wireless
Telephony
www.ti.com/telephony
Video & Imaging
Wireless
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
相关型号:
MAX3232EIPWG4
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION
TI
MAX3232EIPWR
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION
TI
MAX3232EIPWRE4
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION
TI
MAX3232EIPWRG4
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH 【15-kV IEC ESD PROTECTION
TI
MAX3232EIPWRQ1
3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV IEC ESD PROTECTION
TI
MAX3232EPE
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1レF External Capacitors
MAXIM
MAX3232ESE
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1レF External Capacitors
MAXIM
MAX3232EUE
3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1レF External Capacitors
MAXIM
©2020 ICPDF网 联系我们和版权申明