INA286AIDR [TI]
High-Accuracy, Wide Common-Mode Range, Bi-Directional CURRENT SHUNT MONITOR; 高精度,宽共模范围,双向电流分流监测器型号: | INA286AIDR |
厂家: | TEXAS INSTRUMENTS |
描述: | High-Accuracy, Wide Common-Mode Range, Bi-Directional CURRENT SHUNT MONITOR |
文件: | 总33页 (文件大小:1213K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
High-Accuracy, Wide Common-Mode Range, Bi-Directional
CURRENT SHUNT MONITOR
Zerø-Drift Series
Check for Samples: INA282, INA283, INA284, INA285, INA286
1
FEATURES
DESCRIPTION
The INA282 family, which includes the INA282,
2
•
•
•
•
WIDE COMMON-MODE RANGE: –14V to 80V
OFFSET VOLTAGE: ±20μV
CMRR: 140dB
INA283, INA284, INA285, and INA286 devices, are
voltage output current shunt monitors that can sense
drops across shunts at common-mode voltages from
–14V to +80V, independent of the supply voltage.
The low offset of the Zerø-Drift architecture enables
current sensing with maximum drops across the
shunt as low as 10mV full-scale.
ACCURACY:
–
–
–
±1.4% Gain Error (Max)
0.3μV/°C Offset Drift
0.005%/°C Gain Drift (Max)
These current shunt monitors operate from a single
+2.7V to +18V supply, drawing a maximum of 900μA
of supply current. They are specified over the
extended operating temperature range of –40°C to
+125°C, and offered in an SOIC-8 package.
•
AVAILABLE GAINS:
–
–
–
–
–
50V/V: INA282
100V/V: INA286
200V/V: INA283
500V/V: INA284
1000V/V: INA285
Supply
-14V to +80V
+2.7V to +18V
Load
•
QUIESCENT CURRENT: 900μA (Max)
+IN
-IN
V+
APPLICATIONS
•
•
•
•
TELECOM EQUIPMENT
AUTOMOTIVE
1
Æ2
Æ2
Æ1
POWER MANAGEMENT
SOLAR INVERTERS
Æ2
Æ2
1
Æ1
OUT
ZerÆ-
Drift
Output
GAIN
PRODUCT
50V/V
INA282
INA286
INA283
INA284
INA285
100V/V
200V/V
500V/V
1000V/V
33.3kW
33.3kW
REF2
REF1
GND
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2012, Texas Instruments Incorporated
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
PACKAGE/ORDERING INFORMATION(1)
PACKAGE
DESIGNATOR
PACKAGE
MARKING
PRODUCT
INA282
INA283
INA284
INA285
INA286
GAIN
50V/V
PACKAGE
SOIC-8
SOIC-8
SOIC-8
SOIC-8
SOIC-8
D
D
D
D
D
I282A
I283A
I284A
I285A
I286A
200V/V
500V/V
1000V/V
100V/V
(1) For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet, or
refer to the device product folder at www.ti.com.
ABSOLUTE MAXIMUM RATINGS(1)
Over operating free-air temperature range, unless otherwise noted.
INA282, INA283,
INA284, INA285, INA286
UNIT
V
Supply Voltage
Analog Inputs,
+18
(3)
Differential (V+IN) – (V–IN
)
–5 to +5
V
(2)
V+IN, V–IN
Common-Mode
–14 to +80
V
Ref1, Ref2, Out
GND–0.3 to (V+) + 0.3
V
Input Current into Any Pin
Storage Temperature
Junction Temperature
5
–65 to +150
+150
mA
°C
°C
V
Human Body Model (HBM)
Charged-Device Model (CDM)
Machine Model (MM)
3000
ESD Ratings:
1000
V
200
V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those specified is not implied.
(2) V+IN and V–IN are the voltages at the +IN and –IN pins, respectively.
(3) Input voltages must not exceed common-mode rating.
THERMAL INFORMATION
INA282AID,
INA283AID,
INA284AID,
INA285AID,
THERMAL METRIC(1)
UNITS
INA286AID
D
8
θJA
Junction-to-ambient thermal resistance
134.9
72.9
61.3
18.9
54.3
n/a
θJCtop
θJB
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
°C/W
ψJT
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case (bottom) thermal resistance
ψJB
θJCbot
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
2
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
ELECTRICAL CHARACTERISTICS
Boldface limits apply over the specified temperature range, TA = –40°C to +125°C.
At TA = +25°C, V+ = 5V, V+IN = 12V, VREF1 = VREF2 = 2.048V referenced to GND, and VSENSE = V+IN – V–IN, unless otherwise
noted.
INA282, INA283,
INA284, INA285, INA286
PARAMETER
CONDITIONS
VSENSE = 0mV
MIN
TYP
MAX
UNIT
INPUT
Offset Voltage, RTI(1)
VOS
dVOS/dT
PSRR
VCM
±20
±0.3
3
±70
μV
μV/°C
μV/V
V
vs Temperature
±1.5
vs Power Supply
VS = +2.7V to +18V, VSENSE = 0mV
Common-Mode Input Range
Common-Mode Rejection
Input Bias Current per Pin(2)
Input Offset Current
Differential Input Impedance
REFERENCE INPUTS
Reference Input Gain
Reference Input Voltage Range(3)
Divider Accuracy(4)
Reference Voltage Rejection Ratio
INA282
–14
120
80
CMRR
IB
V+IN = –14V to +80V, VSENSE = 0mV
VSENSE = 0mV
140
25
1
dB
μA
IOS
VSENSE = 0mV
μA
6
kΩ
1
V/V
V
0
VGND + 9
±0.5
±0.2
%
VREF1 = VREF2 = 40mV to 9V, V+ = 18V
±25
0.055
±13
±75
±30
±25
±10
±45
μV/V
μV/V/°C
μV/V
vs Temperature
INA283
vs Temperature
0.040
±6
μV/V/°C
μV/V
INA284
vs Temperature
0.015
±4
μV/V/°C
μV/V
INA285
vs Temperature
0.010
±17
μV/V/°C
μV/V
INA286
vs Temperature
0.040
μV/V/°C
GND + 0.5V ≤ VOUT ≤ (V+) – 0.5V;
VREF1 = VREF2 = (V+)/2 for all devices
GAIN(5)
Gain
G
INA282
V+ = +5V
V+ = +5V
V+ = +12V
V+ = +12V
V+ = +5V
50
200
500
1000
100
V/V
V/V
V/V
V/V
V/V
INA283
INA284
INA285
INA286
Gain Error
INA282, INA283, INA286
INA284, INA285
vs Temperature
OUTPUT
±0.4
±0.4
±1.4
±1.6
%
%
0.0008
0.005
%/°C
Nonlinearity Error
Output Impedance
Maximum Capacitive Load
±0.01
1.5
1
%
Ω
No sustained oscillation
nF
(1) RTI = referred-to-input.
(2) See typical characteristic graph Figure 20 .
(3) The average of the voltage on pins REF1 and REF2 must be between VGND and the lesser of (VGND+9V) and V+.
(4) Reference divider accuracy specifies the match between the reference divider resistors using the configuration in Figure 37.
(5) See typical characteristic graph Figure 25.
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
ELECTRICAL CHARACTERISTICS (continued)
Boldface limits apply over the specified temperature range, TA = –40°C to +125°C.
At TA = +25°C, V+ = 5V, V+IN = 12V, VREF1 = VREF2 = 2.048V referenced to GND, and VSENSE = V+IN – V–IN, unless otherwise
noted.
INA282, INA283,
INA284, INA285, INA286
PARAMETER
VOLTAGE OUTPUT(6)
CONDITIONS
RL = 10kΩ to GND
V+ = 5V
MIN
TYP
MAX
UNIT
Swing to V+ Power-Supply Rail
Swing to GND
(V+)–0.17
(V+)–0.4
V
V
GND+0.015
GND+0.04
FREQUENCY RESPONSE
Effective Bandwidth(7)
INA282
BW
10
10
4
kHz
kHz
kHz
kHz
kHz
INA283
INA284
INA285
2
INA286
10
NOISE, RTI(8)
Voltage Noise Density
POWER SUPPLY
Specified Voltage Range
Quiescent Current
TEMPERATURE RANGE
Specified Range
1kHz
110
600
nV/√Hz
VS
+2.7
+18
V
IQ
900
μA
–40
+125
°C
(6) See typical characteristic graphs Figure 29 through Figure 31.
(7) See typical characteristic graph Figure 15 and the Effective Bandwidth section in the Applications Information.
(8) RTI = referred-to-input.
4
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
PIN CONFIGURATION
D PACKAGE
SOIC-8
(TOP VIEW)
-IN
GND
1
2
3
4
8
7
6
5
+IN
REF1
V+
REF2
NC(1)
OUT
(1) NC: This pin is not internally connected. The NC pin should either be left floating or connected to GND.
PIN DESCRIPTIONS
SOIC-8
PIN NO.
NAME
–IN
DESCRIPTION
Connection to negative side of shunt resistor.
1
2
3
4
5
6
7
8
GND
REF2
NC
Ground
Reference voltage connection - See application section for connection options.
This pin is not internally connected. The NC pin should either be left floating or connected to GND.
Output voltage
OUT
V+
Power supply
REF1
+IN
Reference voltage connection - See application section for connection options.
Connection to positive side of shunt resistor.
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
TYPICAL CHARACTERISTICS
At TA = +25°C, V+ = 5V, V+IN = 12V, VREF1 = VREF2 = 2.048V referenced to GND, and VSENSE = V+IN – V–IN, unless otherwise
noted.
START-UP TRANSIENT RESPONSE
START-UP TRANSIENT RESPONSE
VREF = GND, VDRIVE = 0.125V, RLOAD = 10kW, CLOAD = 10pF
VOUT
CLOAD = 10pF
VREF = GND
VOUT
VDRIVE = 0.125V
RLOAD = 10kW
V+
V+
25ms/div
250ms/div
Figure 1.
Figure 2.
12V COMMON-MODE STEP RESPONSE
12V COMMON-MODE STEP RESPONSE
VOUT
VOUT
VCM
VCM
2.5ms/div
2.5ms/div
Figure 3.
Figure 4.
12V COMMON-MODE STEP RESPONSE
12V COMMON-MODE STEP RESPONSE
VOUT
VOUT
VCM
VCM
2.5ms/div
2.5ms/div
Figure 5.
Figure 6.
6
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, V+ = 5V, V+IN = 12V, VREF1 = VREF2 = 2.048V referenced to GND, and VSENSE = V+IN – V–IN, unless otherwise
noted.
50V COMMON-MODE STEP RESPONSE
50V COMMON-MODE STEP RESPONSE
VOUT
VCM
VOUT
VCM
5ms/div
5ms/div
Figure 7.
Figure 8.
100mV STEP RESPONSE
500mV STEP RESPONSE
10ms/div
10ms/div
Figure 9.
Figure 10.
4V STEP RESPONSE
17V STEP RESPONSE
25ms/div
25ms/div
Figure 11.
Figure 12.
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, V+ = 5V, V+IN = 12V, VREF1 = VREF2 = 2.048V referenced to GND, and VSENSE = V+IN – V–IN, unless otherwise
noted.
INA282 PSRR (RTI)
INPUT OVERLOAD
vs FREQUENCY
120
110
100
90
Input Drive (1V to 0V)
VOUT (5V to midsupply)
80
70
60
50
40
30
20
25ms/div
100
1k
10k
100k
1M
100k
1M
Frequency (Hz)
Figure 13.
Figure 14.
INA284
GAIN vs FREQUENCY
COMMON-MODE REJECTION RATIO (RTI)
60
50
150
140
130
120
110
100
90
40
30
20
10
INA282 (50V/V)
INA285 (1kV/V)
INA284 (500V/V)
INA283 (200V/V)
INA286 (100V/V)
0
-10
-20
80
70
10
100
1k
10k
100k
1M
1
10
100
1k
10k
Frequency (Hz)
Frequency (Hz)
Figure 15.
Figure 16.
INA282 COMMON-MODE
SLEW RATE INDUCED OFFSET
INA286 OUTPUT IMPEDANCE
vs FREQUENCY
0.1
1k
100
10
0.01
0.001
0.0001
1
0.00001
0.000001
0.1
10
100
1k
10k
100k
1k
10k
100k
1M
Frequency (Hz)
VCM Slew Rate (V/sec)
Figure 17.
Figure 18.
8
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, V+ = 5V, V+IN = 12V, VREF1 = VREF2 = 2.048V referenced to GND, and VSENSE = V+IN – V–IN, unless otherwise
noted.
INA282 TYPICAL NONLINEARITY
vs OUTPUT VOLTAGE
INA283 +IN BIAS CURRENT
vs COMMON-MODE VOLTAGE
0.06
0.04
0.02
0
30
20
VSENSE = -50mV to +50mV
V+ = 5V
V+ = 2.7V
V+ = 18V
10
0
V+ = 18V
-10
-20
-30
-40
-0.02
-0.04
-0.06
V+ = 3.5V
-20 -10
0
10
20
30
40
50
60
70
80
0
3
6
9
12
15
18
Common-Mode Voltage (V)
VOUT (V)
Figure 19.
Figure 20.
INA283 QUIESCENT CURRENT
vs COMMON-MODE VOLTAGE
QUIESCENT CURRENT
vs SUPPLY VOLTAGE
900
850
800
750
700
650
600
550
500
450
400
900
800
700
600
500
400
300
200
100
0
V+ = 18V
V+ = 5V
V+ = 2.7V
-20
0
20
40
60
80
4
2
6
8
10
12
14
16
18
Common-Mode Voltage (V)
Supply Voltage (V)
Figure 21.
Figure 22.
COMMON-MODE REJECTION RATIO
vs TEMPERATURE
QUIESCENT CURRENT
vs TEMPERATURE
170
160
150
140
130
120
110
100
90
980
880
780
680
580
480
380
280
180
80
V+ = 18V
V+ = 12V
V+ = 5V
V+ = 5V
V+ = 2.7V
80
-75 -50 -25
0
25
50
75
100 125 150
-75 -50 -25
0
25
50
75
100 125 150
Temperature (°C)
Temperature (°C)
Figure 23.
Figure 24.
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, V+ = 5V, V+IN = 12V, VREF1 = VREF2 = 2.048V referenced to GND, and VSENSE = V+IN – V–IN, unless otherwise
noted.
+IN BIAS CURRENT
GAIN vs TEMPERATURE
vs TEMPERATURE
1.0
0.8
0
-5
0.6
-10
-15
-20
-25
-30
-35
-40
0.4
V+ = 2.7V
V+ = 5V
0.2
0
V+ = 5V
-0.2
-0.4
-0.6
-0.8
-1.0
V+ = 12V
V+ = 18V
VCM = 0V
-75 -50 -25
0
25
50
75
100 125 150
-75 -50 -25
0
25
50
75
100 125 150
Temperature (°C)
Temperature (°C)
Figure 25.
Figure 26.
INA282 0.1Hz TO 10Hz VOLTAGE NOISE, RTI
INA282 VOLTAGE NOISE vs FREQUENCY
6.0
5.5
5.0
4.5
4.0
3.5
3.0
0.12
0.11
0.10
0.09
0.08
0.07
0.06
Time (1s/div)
100
1k
10k
100k
Frequency (Hz)
Figure 27.
Figure 28.
INA284 SWING TO RAIL WITH SHORT-CIRCUIT CURRENT
INA283 SWING TO RAIL vs OUTPUT CURRENT
18
0
800
700
600
500
400
300
200
100
0
Source 5V
ISC = 5.2mA
16
14
12
10
8
-2
+25°C
Source 2.7V
ISC = 3.4mA
+85°C
-4
+125°C
-6
Source 18V
ISC = 5.8mA
Sink 18V
ISC = 8.6mA
-8
-10
-12
-14
-16
-18
-40°C
6
Sink 2.7V
ISC = 6.2mA
4
2.7V Swing
5V Swing
Sink 5V
ISC = 8.2mA
2
0
0
1
2
3
4
5
6
7
8
9
10
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
IOUT, Sourcing (mA)
IOUT (mA)
Figure 29.
Figure 30.
10
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
TYPICAL CHARACTERISTICS (continued)
At TA = +25°C, V+ = 5V, V+IN = 12V, VREF1 = VREF2 = 2.048V referenced to GND, and VSENSE = V+IN – V–IN, unless otherwise
noted.
INA283 SWING TO GROUND vs OUTPUT CURRENT
400
350
300
250
+125°C
200
150
100
2.7V Swing
5V Swing
+85°C
50
18V Swing
2.0 2.5
+25°C
-40°C
1.0
0
0
0.5
1.5
IOUT, Sinking (mA)
Figure 31.
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
11
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
APPLICATIONS INFORMATION
GENERAL INFORMATION
The INA282 family voltage output current shunt monitors feature a common-mode range that extends 14V below
the negative supply rail, as well as up to 80V, which allows use for either low-side or high-side current sensing.
BASIC CONNECTIONS
Figure 32 shows the basic connection of an INA282 family device. The input pins, +IN and –IN, should be
connected as closely as possible to the shunt resistor to minimize any resistance in series with the shunt
resistance.
Supply
-14V to +80V
+2.7V to +18V
Load
+IN
-IN
V+
1
Æ2
Æ2
Æ1
Æ2
Æ2
1
Æ1
OUT
ZerÆ-
Drift
Output
GAIN
PRODUCT
50V/V
INA282
INA286
INA283
INA284
INA285
100V/V
200V/V
500V/V
1000V/V
33.3kW
33.3kW
REF2
REF1
GND
Figure 32. Typical Application
Power-supply bypass capacitors are required for stability. Applications with noisy or high-impedance power
supplies may require additional decoupling capacitors to reject power-supply noise. Connect bypass capacitors
close to the device pins.
12
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
POWER SUPPLY
The INA282 family can make accurate measurements well outside of its own power-supply voltage, V+, because
its inputs (+IN and –IN) may operate anywhere between –14V and +80V independent of V+. For example, the V+
power supply can be 5V while the common-mode voltage being monitored by the shunt may be as high as +80V.
Of course, the output voltage range of the INA282 family is constrained by the supply voltage that powers it on
V+. Note that when the power to the INA282 family is off (that is, no voltage is supplied to the V+ pin), the input
pins (+IN and –IN) are high impedance with respect to ground and typically leak less than ±1μA over the full
common-mode range of –14V to +80V
SELECTING RS
The Zerø-Drift architecture of the INA282 family enables use with full-scale range shunt voltages as low as
10mV.
EFFECTIVE BANDWIDTH
The extremely high dc CMRR of the INA282 family results from the switched capacitor input structure. Because
of this architecture, the INA28x exhibits discrete time system behaviors as illustrated in the gain versus frequency
graph of Figure 16 and the step response curves of Figure 3 through Figure 10. The response to a step input
depends somewhat on the phase of the internal INA28x clock when the input step occurs. It is possible to
overload the input amplifier with a rapid change in input common-mode voltage (see Figure 17). Errors as a
result of common-mode voltage steps and/or overload situations typically disappear within 15μs after the
disturbance is removed.
TRANSIENT PROTECTION
The –14V to +80V common-mode range of the INA282 family is ideal for withstanding automotive fault conditions
that range from 12V battery reversal up to +80V transients; no additional protective components are needed up
to those levels. In the event that the INA282 family is exposed to transients on the inputs in excess of its ratings,
then external transient absorption with semiconductor transient absorbers (Zener or Transzorbs) will be
necessary. Use of MOVs or VDRs is not recommended except when they are used in addition to a
semiconductor transient absorber. Select the transient absorber such that it cannot allow the INA282 family to be
exposed to transients greater than 80V (that is, allow for transient absorber tolerance, as well as additional
voltage as a result of transient absorber dynamic impedance). Despite the use of internal zener-type electrostatic
discharge (ESD) protection, the INA282 family does not lend itself to using external resistors in series with the
inputs without degrading gain accuracy.
SHUTDOWN
While the INA282 family does not provide a shutdown pin, the quiescent current of 600μA enables it to be
powered from the output of a logic gate. Take the gate low to shut down the INA282 family devices.
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
13
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
REFERENCE PIN CONNECTION OPTIONS
Figure 33 illustrates a test circuit for reference divider accuracy. The output of the INA282 family can be
connected for unidirectional or bidirectional operation. Note that neither the REF1 pin nor the REF2 pin may be
connected to any voltage source lower than GND or higher than V+, and that the effective reference voltage
(REF1 + REF2)/2 must be 9V or less. This parameter means that the V+ reference output connection shown in
Figure 35 is not allowed for V+ greater than 9V. However, the split-supply reference connection shown in
Figure 37 is allowed for all values of V+ up to 18V.
V+
+IN
-IN
V+
Æ1
Æ2
Æ2
Æ1
Æ2
Æ2
See Note (1)
Æ1
Æ1
OUT
ZerÆ-
Drift
GAIN
PRODUCT
50V/V
INA282
INA286
INA283
INA284
INA285
100V/V
200V/V
500V/V
1000V/V
33.3kW
33.3kW
REF2
REF1
GND
(1) Reference divider accuracy is determined by measuring the output with the reference voltage applied to alternate reference resistors, and
calculating a result such that the amplifier offset is cancelled in the final measurement.
Figure 33. Test Circuit for Reference Divider Accuracy
14
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
UNIDIRECTIONAL OPERATION
Unidirectional operation allows the INA282 family to measure currents through a resistive shunt in one direction.
In the case of unidirectional operation, the output could be set at the negative rail (near ground, and the most
common connection) or at the positive rail (near V+) when the differential input is 0V. The output moves to the
opposite rail when a correct polarity differential input voltage is applied.
The required polarity of the differential input depends on the output voltage setting. If the output is set at the
positive rail, the input polarity must be negative to move the output down. If the output is set at ground, the
polarity is positive to move the output up.
The following sections describe how to configure the output for unidirectional operation.
Ground Referenced Output
When using the INA282 family in this mode, both reference inputs are connected to ground; this configuration
takes the output to the negative rail when there is 0V differential at the input (as Figure 34 shows).
Supply
-14V to +80V
Load
V+
+IN
-IN
V+
Æ1
Æ2
Æ2
Æ1
Æ2
Æ2
Æ1
Æ1
OUT
ZerÆ-
Drift
Output
GAIN
PRODUCT
50V/V
INA282
INA286
INA283
INA284
INA285
33.3kW
33.3kW
100V/V
200V/V
500V/V
1000V/V
REF2
REF1
GND
Figure 34. Ground Referenced Output
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
15
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
V+ Referenced Output
This mode is set when both reference pins are connected to the positive supply. It is typically used when a
diagnostic scheme requires detection of the amplifier and the wiring before power is applied to the load (as
shown in Figure 35).
ISENSE
Supply
-14V to +80V
Load
V+
V+
+IN
-IN
Æ1
Æ2
Æ2
Æ1
Æ2
Æ2
Æ1
Æ1
OUT
ZerÆ-
Drift
Output
GAIN
PRODUCT
50V/V
INA282
INA286
INA283
INA284
INA285
33.3kW
33.3kW
100V/V
200V/V
500V/V
1000V/V
REF2
REF1
GND
Figure 35. V+ Referenced Output
16
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
BIDIRECTIONAL OPERATION
Bidirectional operation allows the INA282 family to measure currents through a resistive shunt in two directions.
In this case, the output can be set anywhere within the limits of what the reference inputs allow (that is, between
0V to 9V, but never to exceed the supply voltage). Typically, it is set at half-scale for equal range in both
directions. In some cases, however, it is set at a voltage other than half-scale when the bidirectional current is
nonsymmetrical.
The quiescent output voltage is set by applying voltage(s) to the reference inputs. REF1 and REF2 are
connected to internal resistors that connect to an internal offset node. There is no operational difference between
the pins.
External Reference Output
Connecting both pins together and to a reference produces an output at the reference voltage when there is no
differential input; this configuration is illustrated in Figure 36. The output moves down from the reference voltage
when the input is negative relative to the –IN pin and up when the input is positive relative to the –IN pin. Note
that this technique is the most accurate way to bias the output to a precise voltage.
Supply
-14V to +80V
Load
V+
V+
+IN
-IN
Æ1
Æ2
Æ2
Æ1
Æ2
Æ2
Æ1
Æ1
OUT
ZerÆ-
Drift
Output
GAIN
PRODUCT
50V/V
INA282
INA286
INA283
INA284
INA285
33.3kW
33.3kW
REF3020
100V/V
200V/V
500V/V
1000V/V
REF2
REF1
2.048V
Reference
GND
Figure 36. External Reference Output
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
17
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
Splitting the Supply
By connecting one reference pin to V+ and the other to the ground pin, the output is set at half of the supply
when there is no differential input, as shown in Figure 37. This method creates a midscale offset that is
ratiometric to the supply voltage; thus, if the supply increases or decreases, the output remains at half the
supply.
Supply
-14V to +80V
Load
V+
+IN
-IN
V+
Æ1
Æ2
Æ2
Æ1
Æ2
Æ2
Æ1
Æ1
OUT
ZerÆ-
Drift
Output
GAIN
PRODUCT
50V/V
INA282
INA286
INA283
INA284
INA285
33.3kW
33.3kW
100V/V
200V/V
500V/V
1000V/V
REF2
REF1
GND
Figure 37. Split-Supply Output
18
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
Splitting an External Reference
In this case, an external reference is divided by 2 with an accuracy of approximately 0.5% by connecting one
REF pin to ground and the other REF pin to the reference (as Figure 38 illustrates).
Supply
-14V to +80V
Load
V+
+IN
-IN
V+
Æ1
Æ2
Æ2
Æ1
Æ2
Æ2
Æ1
Æ1
OUT
ZerÆ-
Drift
Output
GAIN
PRODUCT
50V/V
INA282
INA286
INA283
INA284
INA285
33.3kW
33.3kW
REF02
100V/V
200V/V
500V/V
1000V/V
REF2
REF1
5V
Reference
GND
Figure 38. Split Reference Output
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
19
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
EXTENDED NEGATIVE COMMON-MODE RANGE
Using a negative power supply can extend the common-mode range 14V more negative than the supply used.
For instance, a –10V supply allows up to –24V negative common-mode. Remember to keep the total voltage
between the GND pin and V+ pin to less than 18V. The positive common-mode decreases by the same amount.
The reference input simplifies this type of operation because the output quiescent bias point is always based on
the reference connections. Figure 39 shows a circuit configuration for common-mode ranges from –24V to +70V.
Supply
-24V to +70V
Load
V+ = 5V
+IN
-IN
V+
1
Æ2
Æ2
Æ1
Æ2
Æ2
Æ1
Æ1
OUT
ZerÆ-
Drift
PRODUCT
GAIN
INA282
INA283
INA284
INA285
INA286
50V/V
200V/V
500V/V
1000V/V
100V/V
33.3kW
33.3kW
REF2
REF1
See Note (1)
GND
Connect to -10V
(1) Connect the REF pins as desired; however, they cannot exceed 9V above the GND pin voltage.
Figure 39. Circuit Configuration for Common-Mode Ranges from –24V to +70V
CALCULATING TOTAL ERROR
The electrical specifications for the INA282-286 family of devices include the typical individual errors terms such
as gain error, offset error, and nonlinearity error. Total error including all of these individual error components is
not specified in the Electrical Characteristics table. In order to accurately calculate the error that can be expected
from the device, we must first know the operating conditions to which the device is subjected. Some current
shunt monitors specify a total error in the product data sheet. However, this total error term is accurate under
only one particular set of operating conditions. Specifying the total error at this one point has little practical value
because any deviation from these specific operating conditions no longer yields the same total error value. This
section discusses the individual error sources, with information on how to apply them in order to calculate the
total error value for the device under any normal operating conditions.
The typical error sources that have the largest impact on the total error of the device are input offset voltage,
common-mode voltage rejection, gain error and nonlinearity error. For the INA282-286, an additional error source
referred to as Reference Common-Mode Rejection is also included in the total error value.
20
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
The nonlinearity error of the INA282-286 is relatively low compared to the gain error specification, which results
in a gain error that can be expected to be relatively constant throughout the linear input range of the device.
While the gain error remains constant across the linear input range of the device, the error associated with the
input offset voltage does not. As the differential input voltage developed across a shunt resistor at the input of the
INA282-286 decreases, the inherent input offset voltage of the device becomes a larger percentage of the
measured input signal resulting in an increase in error in the measurement. This varying error is present among
all current shunt monitors, given the input offset voltage ratio to the voltage being sensed by the device. The
relatively low input offset voltages present in the INA282-286 devices limit the amount of contribution the offset
voltage has on the total error term.
The term Reference Common-Mode Rejection refers to the amount of error induced by applying a reference
voltage to the INA282-286 device that deviates from the inherent bias voltage present at the output of the first
stage of the device. The output of the switched-capacitor network and first-stage amplifier has an inherent bias
voltage of approximately 2.048V. Applying a reference voltage of 2.048V to the INA282-286 reference pins
results in no additional error term contribution. Applying a voltage to the reference pins that differs from 2.048V
creates a voltage potential in the internal difference amplifier, resulting in additional current flowing through the
resistor network. As a result of resistor tolerances, this additional current flow causes additional error at the
output because of resistor mismatches. Additionally, as a result of resistor tolerances, this additional current flow
causes additional error at the output based on the common-mode rejection ratio of the output stage amplifier.
This error term is referred back to the input of the device as additional input offset voltage. Increasing the
difference between the 2.048V internal bias and the external reference voltage results in a higher input offset
voltage. Also, as the error at the output is referred back to the input, there is a larger impact on the input-referred
offset, VOS, for the lower-gain versions of the device.
Two examples are provided that detail how different operating conditions can affect the total error calculations.
Typical and maximum calculations are shown as well to provide the user more information on how much error
variance could be present from device to device.
Example 1
INA282; VS = 5V; VCM = 12V; VREF = 2.048V; VSENSE = 10mV
Table 1. Example 1
TERM
SYMBOL
EQUATION
TYPICAL VALUE
MAXIMUM VALUE
Initial Input Offset
Voltage
VOS
—
20μV
70μV
Added Input Offset
Voltage Because of
Common-Mode
Voltage
1
CMRR_dB
´ (VCM - 12V)
(
VOS_CM
0μV
0μV
(
20
10
Added Input Offset
Voltage Because of
Reference Voltage
R
CMR ´ (2.048V - VREF)
VOS_REF
VOS_Total
Error_VOS
0μV
20μV
0.20%
0μV
70μV
0.70%
Total Input Offset
Voltage
2
(VOS)2 + (VOS_CM)2 + (VOS_REF
)
VOS_Total
Error from Input
Offset Voltage
´ 100
VSENSE
Gain Error
Error_Gain
Error_Lin
—
—
0.40%
0.01%
1.40%
0.01%
Nonlinearity Error
(Error_VOS)2 + (Error_Gain)2 + (Error_Lin)2
Total Error
—
0.45%
1.56%
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
21
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
Example 2
INA286; VS = 5V; VCM = 24V; VREF = 0V; VSENSE = 10mV
Table 2. Example 2
TERM
SYMBOL
EQUATION
TYPICAL VALUE
MAXIMUM VALUE
Initial Input Offset
Voltage
VOS
—
20μV
70μV
Added Input Offset
Voltage Because of
Common-Mode
Voltage
1
CMRR_dB
´ (VCM - 12V)
(
VOS_CM
1.2μV
12μV
(
20
10
Added Input Offset
Voltage Because of
Reference Voltage
R
CMR ´ (2.048V - VREF)
VOS_REF
VOS_Total
Error_VOS
34.8μV
40.2μV
0.40%
92.2μV
116.4μV
1.16%
Total Input Offset
Voltage
2
(VOS)2 + (VOS_CM)2 + (VOS_REF
)
VOS_Total
Error from Input
Offset Voltage
´ 100
VSENSE
Gain Error
Error_Gain
Error_Lin
—
—
0.40%
0.01%
1.40%
0.01%
Nonlinearity Error
(Error_VOS)2 + (Error_Gain)2 + (Error_Lin)2
Total Error
—
0.57%
1.82%
SUMMING CURRENTS AND PARALLELING
The outputs of multiple INA282 family devices are easily summed by connecting the output of one INA282 family
device to the reference input of a second INA282 family device. Summing beyond two devices is possible by
repeating this connection, and is shown for three devices in Figure 40. The reference input of the first INA282
family device sets the output quiescent level for all the devices in the string.
First Circuit
Second Circuit
Third Circuit
VIN+
VIN-
VIN+
VIN-
VIN+
VIN-
Æ1
Æ2
Æ2
Æ1
Æ1
Æ2
Æ2
Æ1
Æ1
Æ2
Æ2
Æ1
Æ2
Æ2
Æ2
Æ2
Æ2
Æ2
Æ1
Æ1
Æ1
Æ1
Output
Output
Output
Summed
Output
VREF
GND
GND
GND
V+
V+
V+
NOTE: The voltage applied to the reference inputs cannot exceed 9V.
Figure 40. Summing the Outputs of Multiple INA282 Family Devices
22
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
CURRENT DIFFERENCING
Occasionally, the need arises to confirm that the current into a load is identical to the current out of a load,
usually as part of diagnostic testing or fault detection. This situation requires precision current differencing, which
is the same as summing except that the two amplifiers have the inputs connected opposite of each other. Under
normal operating conditions, the final output is very close to the reference value and proportional to any current
difference. Figure 41 is an example of the connections required for current differencing.
First Circuit
Second Circuit
Supply
Load
VIN+
VIN-
VIN+
VIN-
Æ1
Æ2
Æ2
Æ1
Æ1
Æ2
Æ2
Æ1
Æ2
Æ2
Æ2
Æ2
Æ1
Æ1
Æ1
Æ1
Output
Output
Difference
Output
VREF
GND
GND
V+
V+
NOTE: This example is identical to the current summing example, except that the two shunt inputs are reversed in polarity,
this current differencing circuit is useful in detecting when current into and out of a load do not match.
Figure 41. Current Differencing Using an INA282 Family Device
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
23
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
COMMON-MODE DYNAMICS AND CURRENT DIFFERENCING
Current sensing is frequently used on totem-pole output stages, such as those of bridge-type motor drives. We
can sense current in one of three locations on a totem-pole output: on the ground side (low-side sensing); on the
power-supply side (high-side sensing); or on the output (phase sensing). Only the output line reports the exact
load current. Obviously, the ground and supply-side sensing report only the current in the individual respective
phases. Figure 42 depicts these various methods on a three-phase motor driver.
Motor
High Side
Current
Sense
High Side
Current
Sense
High Side
Current
Sense
Phase
Current
Sense
Phase
Current
Sense
Phase
Current
Sense
Low Side
Current Sense
Low Side
Current Sense
Low Side
Current Sense
NOTE: Motor drive current sensing can be done on the low side, phase side, or high side. Only the phase output gives
complete information regarding current in the motor, but is subject to common-mode transients that even the best
amplifiers do not reject completely.
Figure 42. Motor Drive Current Sensing
However, sensing on the output is subject to large common-mode voltage steps that result in feedthrough in
even the best amplifiers. The ground and supply-side sensing configurations are free of this problem, thanks to
the static common-mode environments. Sensing either ground or supply alone only provides partial information
regarding motor current, but sense them individually and sum them and we have the same information provided
by phase sensing, with an added advantage of not being subject to transient common-mode artifacts. See
Figure 43 for an illustration of two INA282 family devices connected in this manner. Technically, this
configuration is current differencing, though, because we want the upper sense to report a positive-going
excursion in the overall output, and the negative sense to report a negative-going excursion.
24
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
www.ti.com
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
Motor
Supply
(< 80V)
+2.7V to
+18V
VIN-
VIN+
Q1
D1
D2
MOSFET
Drive
Circuits
VREF
Output
Q2
+2.7V to
+18V
VIN-
VIN+
NOTE: By sensing totem-pole current on both the positive and negative rail and summing, dynamic common-mode issues
can be avoided entirely. Note that IC2 is connected with inverting inputs because it should report current with an
opposite polarity to that of IC1.
Figure 43. Sensing and Summing Totem Pole Current
Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
25
Product Folder Links: INA282 INA283 INA284 INA285 INA286
INA282, INA283
INA284, INA285
INA286
SBOS485B –NOVEMBER 2009–REVISED SEPTEMBER 2012
www.ti.com
Changes from Revision A (July 2010) to Revision B
Page
•
Changed devices from product preview to production data. ................................................................................................ 1
26
Submit Documentation Feedback
Copyright © 2009–2012, Texas Instruments Incorporated
Product Folder Links: INA282 INA283 INA284 INA285 INA286
PACKAGE OPTION ADDENDUM
www.ti.com
24-Jan-2013
PACKAGING INFORMATION
Orderable Device
INA282AID
Status Package Type Package Pins Package Qty
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
Samples
Drawing
(1)
(2)
(3)
(4)
ACTIVE
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
SOIC
D
8
8
8
8
8
8
8
8
8
8
75
2500
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-2-260C-1 YEAR
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
-40 to 125 I282A
-40 to 125 I282A
-40 to 125 I283A
-40 to 125 I283A
-40 to 125 I284A
-40 to 125 I284A
-40 to 125 I285A
-40 to 125 I285A
-40 to 125 I286A
-40 to 125 I286A
INA282AIDR
INA283AID
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
D
D
D
D
D
D
D
D
D
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
INA283AIDR
INA284AID
2500
75
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
INA284AIDR
INA285AID
2500
75
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
INA285AIDR
INA286AID
2500
75
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
INA286AIDR
2500
Green (RoHS
& no Sb/Br)
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
24-Jan-2013
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) Only one of markings shown within the brackets will appear on the physical device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF INA282 :
Automotive: INA282-Q1
•
NOTE: Qualified Version Definitions:
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
•
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Jan-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
INA282AIDR
INA283AIDR
INA285AIDR
SOIC
SOIC
SOIC
D
D
D
8
8
8
2500
2500
2500
330.0
330.0
330.0
12.4
12.4
12.4
6.4
6.4
6.4
5.2
5.2
5.2
2.1
2.1
2.1
8.0
8.0
8.0
12.0
12.0
12.0
Q1
Q1
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
26-Jan-2013
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
INA282AIDR
INA283AIDR
INA285AIDR
SOIC
SOIC
SOIC
D
D
D
8
8
8
2500
2500
2500
367.0
367.0
367.0
367.0
367.0
367.0
35.0
35.0
35.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号:
INA290A1QDCKRQ1
INA290-Q1 AEC-Q100, 2.7-V to 120-V, 1.1-MHz, Ultra-Precise Current Sense Amplifier
TI
INA290A2QDCKRQ1
INA290-Q1 AEC-Q100, 2.7-V to 120-V, 1.1-MHz, Ultra-Precise Current Sense Amplifier
TI
©2020 ICPDF网 联系我们和版权申明