MAAD-009171-0001TB [TE]
Digital Attenuator, Constant Phase 32 dB, 2-Bit, TTL Driver, DC-4.0 GHz; 数字衰减器,恒相32分贝, 2位, TTL驱动器, DC- 4.0 GHz的型号: | MAAD-009171-0001TB |
厂家: | TE CONNECTIVITY |
描述: | Digital Attenuator, Constant Phase 32 dB, 2-Bit, TTL Driver, DC-4.0 GHz |
文件: | 总6页 (文件大小:197K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MAAD-009171-000100
Digital Attenuator, Constant Phase
32 dB, 2-Bit, TTL Driver, DC-4.0 GHz
Rev. V1
Functional Schematic
Features
• Attenuation: Two 16 dB bits
• Minimal Phase Variation over Attenuation Range
•
•
•
•
•
•
Low DC Power Consumption
Small Footprint, PQFN Package
Integral TTL Driver
50 ohm Impedance
Test Boards are Available
RoHS* Compliant
Description
M/A-COM's MAAD-009171-000100 is a GaAs FET
2-bit digital attenuator with two 16 dB steps and 32
dB total attenuation with integral TTL driver. This
design has been optimized to minimize phase
variation over the full attenuation range. This
attenuator is in an RoHS compliant PQFN plastic
surface mount package. MAAD-009171-000100 is
ideally suited for use where accuracy, fast switching,
very low power consumption and low
Pin Configuration1
intermodulation products are required.
Typical
applications include dynamic range setting in
precision receiver circuits and other gain/leveling
control circuits.
Pin No.
Function
GND
Pin No.
17
Function
1
2
NC
NC
GND
18
3
C2
19
NC
C1
4
20
NC
GND
Ordering Information
5
21
NC
GND
6
22
NC
Part Number
Package
7
GND
NC
23
NC
MAAD-009171-000100
Bulk Packaging
8
24
NC
9
NC
25
NC
MAAD-009171-0001TR
MAAD-009171-0001TB
1000 piece reel
10
11
12
13
14
15
16
NC2
GND
RF1
GND
NC
26
GND
RF2
GND
NC2
Sample Test Board
27
Note: Reference Application Note M513 for reel size
information.
28
29
Vee
30
NC
31
NC
NC
32
+Vcc
1. The exposed pad centered on the package bottom must be
connected to RF and DC ground. (For PQFN Packages)
2. Pins 10 & 29 must be isolated
* Restrictions on Hazardous Substances, European Union
Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-009171-000100
Digital Attenuator, Constant Phase
32 dB, 2-Bit, TTL Driver, DC-4.0 GHz
Rev. V1
Electrical Specifications: TA = 25°C, Z0 = 50Ω, VCC = +5.0V, VEE = -5.0V
Parameter
Test Conditions
Frequency Units
Min
Typ
Max
Operating Power3
—
—
dBm
—
—
+20
DC - 2.0 GHz
2.0 - 4.0 GHz
dB
dB
—
—
—
—
1.9
2.2
Reference Insertion Loss
Attenuation Accuracy4
—
16 dB Bit (C1 Control)
32 dB Attenuation
DC - 4.0 GHz
DC - 4.0 GHz
dB
dB
15.5
30.8
—
—
16.8
34.0
16 dB Bit (C1 Control)
16 dB Bit (C1 Control)
32 dB Attenuation
DC - 2.0 GHz
2.0 - 4.0 GHz
DC - 2.0 GHz
2.0 - 4.0 GHz
deg
deg
deg
deg
—
—
—
—
—
—
—
—
±4º
±5º
±8º
±9º
Phase Accuracy
Relative to Reference Loss State
32 dB Attenuation
Reference Loss,
16 dB Bit (C1 Control),
or 32 dB Attenuation
VSWR
DC - 4.0 GHz
Ratio
—
—
1.8:1
Switching Speed
Ton
Toff
Trise
Tfall
1.3 V Cntl to 90% RF
1.3 V Cntl to 10% RF
10% RF to 90% RF
90% RF to 10% RF
—
—
__
__
ns
ns
ns
ns
—
—
—
—
42
30
19
16
—
—
—
—
Reference State
Reference State
0.05 GHz
0.5 - 4.0 GHz
dBm
dBm
—
—
>+26
>+26
—
—
1 dB Compression5
Input IP3
Two-tone inputs
up to +5 dBm
+42
+42
0.05-4.0 GHz
0.05-4.0 GHz
dBm
dBm
—
—
—
—
Two-tone inputs
up to +5 dBm
+55
+77
Input IP2
Vcc
Vee
—
—
—
—
V
V
4.5
-8.0
5.0
-5.0
5.5
-4.5
VIL
VIH
LOW-level input voltage
HIGH-level input voltage
—
—
V
V
0.0
2.0
0.0
5.0
0.8
5.0
lin (Input Leakage Current)
Vin = VCC or GND
—
—
uA
uA
-1
—
1
Icc
Vcntrl = VCC or GND
—
250
400
(Quiescent Supply Current)
ΔIcc
VCC = Max
Vcntrl = VCC - 2.1 V
(Additional Supply Current Per
TTL Input Pin)
—
mA
—
—
1.5
VEE min to max
Vin = VIL or VIH
IEE
—
—
mA
-1.0
—
-0.2
35
—
—
Thermal Resistance θjc
—
°C/W
3. Maximum operating power is specified with the input applied to RF1. If the input is applied to RF2, then maximum operating power is +16 dBm.
4. This attenuator is guaranteed monotonic.
5. 1 dB Compression was measured up to +26 dBm, which is the absolute maximum rating for this device.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-009171-000100
Digital Attenuator, Constant Phase
32 dB, 2-Bit, TTL Driver, DC-4.0 GHz
Rev. V1
Recommended PCB Configuration10
Absolute Maximum Ratings 6,7
Parameter
Absolute Maximum
Max. Input Power8
+26 dBm
VCC
VEE
-0.5V ≤ VCC ≤ +7.0V
-8.5V ≤ VEE ≤ +0.5V
-0.5V ≤ VCC - VEE ≤ 14.5V
-0.5V ≤ Vin ≤ VCC + 0.5V
-40ºC to +85ºC
VCC - VEE
Vin9
Operating Temperature
Storage Temperature
-65ºC to +125ºC
6. Exceeding any one or combination of these limits may cause
permanent damage to this device.
7. M/A-COM does not recommend sustained operation near
these survivability limits.
8. Maximum input power is specified with power applied to
RF1.
9. Standard CMOS TTL interface, latch-up will occur if logic
signal is applied prior to power supply.
10. Application Note S2083 is available on line at
www.macom.com
Handling Procedures
Please observe the following precautions to avoid
damage:
Truth Table (Digital Attenuator)11
C2
0
C1
0
Attenuation
Loss, Reference
16 dB
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
0
1
1
1
32 dB
0 = TTL Low; 1 = TTL High
11. C1 is specified as the control for the 16 dB bit. We show
data for the performance with the C2 control - note that the
power handling is reduced if C2 is used for the 16 dB bit.
The electrical performance of the 16 dB bit controlled by
C2 is not specified.
Moisture Sensitivity
The MSL rating for this part is defined as Level 2
per IPC/JEDEC J-STD-020. Parts shall be stored
and/or baked as required for MSL Level 2 parts.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-009171-000100
Digital Attenuator, Constant Phase
32 dB, 2-Bit, TTL Driver, DC-4.0 GHz
Rev. V1
Typical Performance Curves
Reference Loss vs. Frequency
Attenuation - 16 dB Bit (C1) vs. Frequency
17.0
16.8
3.5
25ºC
3.0
25ºC
85ºC
2.5
16.6
16.4
16.2
16.0
15.8
85ºC
2.0
1.5
1.0
-40ºC
-40ºC
0.5
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
Frequency (GHz)
Attenuation - 16 dB Bit (C2) vs. Frequency
Attenuation - 32 dB Attenuation vs. Frequency
35.0
17.2
17.0
25ºC
34.5
25ºC
34.0
85ºC
16.8
16.6
16.4
16.2
16.0
85ºC
33.5
33.0
-40ºC
-40ºC
32.5
32.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
Frequency (GHz)
Phase - 16 dB Bit (C1) vs. Frequency
Relative to Reference Loss State
Phase - 16 dB Bit (C2) vs. Frequency
Relative to Reference Loss State
2.0
2.0
-40ºC
-40ºC
0.0
0.0
25ºC
-2.0
-4.0
-2.0
-4.0
85ºC
85ºC
25ºC
-6.0
-6.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
Frequency (GHz)
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-009171-000100
Digital Attenuator, Constant Phase
32 dB, 2-Bit, TTL Driver, DC-4.0 GHz
Rev. V1
Typical Performance Curves
VSWR - Reference State vs. Frequency
Phase - 32 dB Attenuation vs. Frequency
Relative to Reference Loss State
4.0
2.0
2.0
1.8
0.0
1.6
-40ºC
-2.0
25ºC
RF2
1.4
1.2
1.0
RF1
-4.0
-6.0
85ºC
-8.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
Frequency (GHz)
VSWR - 16 dB Bit (C1) vs. Frequency
VSWR - 16 dB Bit (C2) vs. Frequency
2.0
1.8
2.0
1.8
1.6
1.6
RF2
RF1
1.4
1.2
1.0
RF1
1.4
RF2
1.2
1.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0.0
1.0
2.0
3.0
Frequency (GHz)
4.0
5.0
6.0
Frequency (GHz)
VSWR - 32 dB Attenuation vs. Frequency
2.0
1.8
1.6
1.4
RF1
RF2
1.2
1.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
MAAD-009171-000100
Digital Attenuator, Constant Phase
32 dB, 2-Bit, TTL Driver, DC-4.0 GHz
Rev. V1
Typical Performance
Typical Input IP2 and IP3 at Room Temperature12
IP2
IP3
Attenuation
Units
50 MHz 500 MHz 2 GHz
50 MHz 500 MHz
2 GHz
Reference State
16 dB (C1)
16 dB (C2)
32 dB
55
62
57
65
77
78
78
80
75
87
77
90
42
41
41
43
42
41
41
43
43
dBm
dBm
dBm
dBm
44
44
53
12. IP2 and IP3 are measured with two-tone inputs F1 and F2 up to +5 dBm with 1 MHz spacing.
CSP-1, 4 x 6 mm, 32-lead PQFN†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明