B82732W2102B030 [TDK]
General Purpose Inductor, 22000uH, 50%, 1 Element, Ferrite-Core, ROHS COMPLIANT;
| 型号： | B82732W2102B030 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | General Purpose Inductor, 22000uH, 50%, 1 Element, Ferrite-Core, ROHS COMPLIANT PC 测试 功率感应器 电感器 |
| 文件： | 总7页 (文件大小：207K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Power line chokes
Current-compensated D core double chokes
250 V AC, 3.3 … 100 mH, 0.4 … 2.2 A, +40 °C
Series/Type:
B82732R/W
Date:
a~í~=pÜÉÉí December 2016
¤ꢀEPCOS AG 2016. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS’ prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Power line chokes
B82732R/W
Current-compensated D core double chokes
Rated voltage 250 V AC
Rated inductance 3.3 ... 100 mH
Rated current 0.4 ... 2.2 A / +40 °C
Construction
■ Current-compensated double choke
■ Closed rectangular ferrite core
■ Closed plastic coil former (UL 94 V-0)1)
■ Without encapsulation
B82732R
■ 2-section winding
■ Clearance and creepage distances t 3 mm
Features
■ High resonance frequency due to 2-section winding
■ Approx. 1% stray inductance for symmetrical interference suppression
■ Low leakage due to closed core shape
■ High pulse strength
■ Low whirring noise
■ Suitable for wave soldering
B82732W
■ Design complies with EN 60938-2 (VDE 0565-2) and UL 1283
■ UL2) and ENEC (VDE) approvals
■ Recyclable owing to omission of encapsulation and glue
■ RoHS-compatible
Applications
■ Suppression of common-mode interferences
■ Switch-mode power applications
■ Electronic ballasts in lamps
Terminals
■ Base material CuNi18Zn20
■ Layer composition Ni, Sn
■ Hot-dipped
■ Pins 0.6 u 0.6 (mm)
■ Lead spacing 10 u 12.5 (mm)
Marking
Manufacturer, rated inductance, rated current,
ordering code, approval symbols, date of manufacture (WWYY)
Delivery mode
Blister tray in cardboard box
1) Additionally certified values:
Glow wire flammability index (GWFI to IEC 60695-2-12):
+850 °C
Glow wire ignition temperature (GWIT to IEC 60695-2-13): +775 °C
Glow wire test (GWT to IEC 60695-2-11):
Comparative tracking index (CTI to IEC 60112):
Ball pressure test (BP to IEC 60695-10-2):
2) UL approval with 300 V AC.
+750 °C, 2 s / 850 °C, 30 s
175 V
+125 °C
Please read Cautions and warnings and
Important notes at the end of this document.
2
12/16
Power line chokes
B82732R/W
Current-compensated D core double chokes
Dimensional drawings and pin configuration
Vertical version (B82732R)
Horizontal version (B82732W)
Please read Cautions and warnings and
Important notes at the end of this document.
3
12/16
Power line chokes
B82732R/W
Current-compensated D core double chokes
Technical data and measuring conditions
Rated voltage VR
Test voltage Vtest
Rated temperature TR
Rated current IR
250 V AC (50/60 Hz)
1500 V AC, 2 s (line/line)
+40 qC
Referred to 50 Hz and rated temperature
Rated inductance LR
Measured with Agilent 4284A at 0.1 mA, +20 °C, 10 kHz.
Inductance is specified per winding.
Inductance tolerance
Inductance decreaseꢀ'L/L0
Stray inductance Lstray,typ
DC resistance Rtyp
–30/+50% at +20 °C
< 10% at DC magnetic bias with IR, +20 °C
Measured with Agilent 4284A at 10 kHz, 5 mA, +20 °C, typ. values
Measured at +20 °C, typical values, specified per winding
Solderability (lead-free)
Sn96.5Ag3.0Cu0.5: +(245 r3) °C, (3 r0.3) s
Wetting of soldering area tꢀ95%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering)
+(260 r5) °C, (10 r1) s
(to IEC 60068-2-20, test Tb)
Climatic category
40/125/56 (to IEC 60068-1)
Storage conditions (packaged) –25 °C … +40 °C, dꢀ75% RH
Weight
Approx. 11 g
Approvals
IEC / EN 60938-2, UL 1283 (E70122)
Characteristics and ordering codes
Approvals
IR
A
LR
Lstray,typ Rtyp
Ordering code
Vertical version
Horizontal version
mH
PH
m:
0.4
0.6
0.7
0.9
1.0
1.1
1.4
1.7
2.2
100
47
39
27
22
15
10
850
400
330
230
165
125
85
3000
1400
1100
750
B82732R2401B030 B82732W2401B030 u
u
u
u
u
u
u
u
u
u
u
B82732R2601B030 B82732W2601B030
B82732R2701B030 B82732W2701B030 u
B82732R2901B030 B82732W2901B030 u
B82732R2102B030 B82732W2102B030 u
B82732R2112B030 B82732W2112B030 u
B82732R2142B030 B82732W2142B030 u
B82732R2172B030 B82732W2172B030 u
B82732R2222B030 B82732W2222B030 u
580
440
300
6.8
3.3
55
190
27
110
u = approval granted
Please read Cautions and warnings and
Important notes at the end of this document.
4
12/16
Power line chokes
B82732R/W
Current-compensated D core double chokes
Impedance |Z| versus frequency f
measured with windings in parallel at +20 °C
typical values
Current derating Iop/IR
versus ambient temperature TA
Please read Cautions and warnings and
Important notes at the end of this document.
5
12/16
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the
specifications of the respective products. Detailed information can be found on the Internet
under www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
6
12/16
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI,
SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other
countries. Further information will be found on the Internet at www.epcos.com/trademarks.
7
12/16
相关型号：
©2020 ICPDF网 联系我们和版权申明