B82732W2401B030 [EPCOS]
Power line chokes; 电源线扼流圈
| 型号： | B82732W2401B030 |
| 厂家： | 
EPCOS |
| 描述： | Power line chokes |
| 文件： | 总6页 (文件大小：169K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Power line chokes
Current-compensated D core double chokes
250 V AC, 0.4 … 2.2 A, 3.3 … 100 mH
Series/Type:
B82732R/W
Date:
October 2008
EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
Power line chokes
B82732R/W
Current-compensated D core double chokes
Rated voltage 250 V AC
Rated current 0.4 A to 2.2 A
Rated inductance 3.3 mH to 100 mH
Construction
■ Current-compensated double choke
■ Closed rectangular ferrite core
■ Closed polycarbonate coil former (UL 94 V-0)
■ Without encapsulation
B82732R
■ 2-section winding
■ Clearance and creepage distances > 3 mm
Features
■ High resonance frequency due to 2-section winding
■ Approx. 1% stray inductance for symmetrical
interference suppression
■ Low leakage due to closed core shape
■ High pulse strength
B82732W
■ Low whirring noise
■ Suitable for wave soldering
■ Design complies with EN 60938-2 (VDE 0565-2)
■ UL and VDE approvals
■ Recyclable owing to omission of encapsulation and glue
■ RoHS-compatible
Applications
■ Suppression of common-mode interferences
■ Switch-mode power applications
■ Electronic ballasts in lamps
Terminals
■ Base material CuNi18Zn20
■ Layer composition Ni, Sn
■ Hot-dipped
■ Pins 0.6 × 0.6 (mm)
■ Lead spacing 10 × 12.5 (mm)
Marking
Manufacturer, rated inductance, rated current,
ordering code, approval symbols, date of manufacture (WWYY)
Delivery mode
Blister tray in cardboard box
Please read Cautions and warnings and
Important notes at the end of this document.
2
10/08
Power line chokes
B82732R/W
Current-compensated D core double chokes
Dimensional drawings and pin configuration
Vertical version (B82732R)
Horizontal version (B82732W)
1
2
1
4
2
3
1
4
2
3
1
4
2
3
4
3
12.5±0.2
24 max.
12.5±0.2
24 max.
16.5 max.
8.3 max. 14.8 max.
0.6
0.6
IND0286-L
IND0287-U
Tolerances to ISO 2768-C
unless otherwise noted.
Dimensions in mm
Technical data and measuring conditions
Rated voltage VR
Test voltage Vtest
Rated temperature TR
Rated current IR
250 V AC (50/60 Hz)
1500 V AC, 2 s (line/line)
40 °C
Referred to 50 Hz and rated temperature
Rated inductance LR
Measured with Agilent 4284A at 0.1 mA, 20 °C, 10 kHz.
Inductance is specified per winding.
Inductance tolerance
Inductance decrease ΔL/L0
Stray inductance Lstray,typ
DC resistance Rtyp
–30/+50% at 20 °C
< 10% at DC magnetic bias with IR, 20 °C
Measured with Agilent 4284A at 10 kHz, 5 mA, 20 °C, typ. values
Measured at 20 °C, typical values, specified per winding
Solderability (lead-free)
Sn96.5Ag3.0Cu0.5: (245 ±5) °C, (3 ±0.3) s
Wetting of soldering area ≥ 95% (to IEC 60068-2-20, test Ta)
Resistance to soldering heat
(wave soldering)
(260 ±5) °C, (10 ±1) s
(to IEC 60068-2-20, test Tb)
Climatic category
Storage conditions (packaged)
Weight
40/125/56 (to IEC 60068-1)
–25 °C … +40 °C, ≤ 75% RH
Approx. 11 g
Approvals
EN 60938-2, UL 1283
Please read Cautions and warnings and
Important notes at the end of this document.
3
10/08
Power line chokes
B82732R/W
Current-compensated D core double chokes
Characteristics and ordering codes
IR
LR
Lstray,typ Rtyp
Ordering code
Vertical version
Approvals
A
mH
100
47
39
27
22
15
10
μH
mΩ
Horizontal version
0.4
0.6
0.7
0.9
1.0
1.1
1.4
1.7
2.2
850
400
330
230
165
125
85
3000
1400
1100
750
580
440
300
190
110
B82732R2401B030 B82732W2401B030 –
–
×
×
×
–
×
×
×
×
×
B82732R2601B030 B82732W2601B030
B82732R2701B030 B82732W2701B030 ×
B82732R2901B030 B82732W2901B030 ×
B82732R2102B030 B82732W2102B030 –
B82732R2112B030 B82732W2112B030 ×
B82732R2142B030 B82732W2142B030 ×
B82732R2172B030 B82732W2172B030 ×
B82732R2222B030 B82732W2222B030 ×
6.8
3.3
55
27
× = approval granted
Impedance |Z| versus frequency f
measured with windings in parallel at 20 °C
typical values
Current derating Iop/IR
versus ambient temperature TA
IND0291-4-E
IND0373-A-E
106
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
B82732R/W
Iop
IR
Ω
|Z|
105
TR = 40 C
˚
104
2401B030
2601B030
2701B030
2901B030
2102B030
2112B030
2142B030
2172B030
2222B030
103
102
101
104
105
106
Hz 107
f
20
40
60
80 100
C 140
0
˚
TA
Please read Cautions and warnings and
Important notes at the end of this document.
4
10/08
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
5
10/08
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or other action taken by the customer (e.g. installation of protective
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
6
03/09
相关型号：
©2020 ICPDF网 联系我们和版权申明