B74121G0160M060 [TDK]
TVS二极管;型号: | B74121G0160M060 |
厂家: | TDK ELECTRONICS |
描述: | TVS二极管 二极管 电视 |
文件: | 总12页 (文件大小:387K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Transient Voltage Suppressors – TVS
General purpose (GP) type
Series/Type:
Ordering code:
SD0201SL-GP103
B74121G0160M060
Date:
Version:
2022-05-12
1
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF.
Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it!
Identification/Classification 1
(header 1 + top left header bar):
Identification/Classification 2
(header 2 + bottom left header bar):
Ordering code: (top right header bar)
Series/Type: (top right header bar)
Preliminary data (optional):
Department:
Transient Voltage Suppressors – TVS
General purpose (GP) type
B74121G0160M060
SD0201SL-GP103
PPD ML PD
Date:
2022-05-12
Version:
1
Prepared by:
Hr. Feichtinger
Release signed PD:
Dr. Pecina
Release signed QA:
Mr. Lic
Modifications/Remarks:
Typical capacitance values updated
Typical clamping voltage values updated
Vbr at 0.1mA limits added
Classification temperature Tc added to the soldering info table
TDK Electronics AG 2022. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without TDK Electronics' prior express consent is prohibited.
Transient Voltage Suppressors – TVS
General purpose (GP) type
B74121G0160M060
SD0201SL-GP103
Features
Bidirectional ESD protection of one I/O line
Working voltage up to 16 V
High ESD protection to IEC 61000-4-2 up to 15 kV
Low clamping voltage
Low leakage current
Low capacitance: typical 5.5 pF at 1 MHz, 16 V
Small WL-CSP 0201 package with a height of 0.15 mm
Applications
Cellular handsets
Laptops
Tablets
Wearables
Network communication devices
Other portable devices with tight space requirements
Schematics
Pin
A1
B1
Description
I/O Pin
GND
Due to the symmetrical configuration no marking information is needed.
A1 and B1 can be interchanged.
Ordering code
B74121G0160M060
Maximum ratings
Rating
Symbol
VRWM,max
VESD,max
Value
16.0
12
Unit
V
DC working voltage I/O to GND
ESD robustness contact discharge
(acc. to IEC 61000-4-2 standard)
kV
ESD robustness air discharge
VESD,max
15
kV
(acc. to IEC 61000-4-2 standard)
Ambient temperature
PPD ML PD
TA
-40 … +125
°C
2022-05-12
Please read Cautions and warnings and
Page 2 of 12
Important notes at the end of this document.
Transient Voltage Suppressors – TVS
General purpose (GP) type
B74121G0160M060
SD0201SL-GP103
Characteristics (TA = 25 °C)
Parameter
Symbol Conditions
Minimum
18.0
Typical
21.0
Maximum
24.0
Unit
V
Breakdown voltage
Holding voltage
VBR
VH
Vtr
IBR = 0.1 mA, I/O to GND
IH = 0.3 A, TLP 100 ns
TLP 100 ns
17.8
19.8
21.8
V
Trigger voltage
Leakage current
Capacitance
21.0
24.0
50
V
Ileak
C
VRWM = 16 V
5
nA
pF
pF
pF
pF
V
f = 1 MHz, VDC,bias = 0 V
f = 1 MHz, VDC,bias = 3.3 V
f = 1 MHz, VDC,bias = 5 V
f = 1 MHz, VDC,bias = 16 V
ITLP = 8 A, TLP 100 ns
ITLP = 16 A, TLP 100 ns
ITLP range: 8 …16 A, TLP
9.0
7.0
6.5
5.5
23.0
25.7
0.33
Vclamp
Vclamp
Rdyn
Clamping voltage
V
Dynamic resistance
Ω
Note: Any operating voltage lower than VRWM results in lower leakage current.
Typical I-V characteristics
PPD ML PD
2022-05-12
Please read Cautions and warnings and
Page 3 of 12
Important notes at the end of this document.
Transient Voltage Suppressors – TVS
General purpose (GP) type
B74121G0160M060
SD0201SL-GP103
Dimensional drawing
WL-CSP0201 SL
Symbol
Mean
0.60
0.30
0.15
0.24
0.17
0.19
0.36
0.025
Tol.
A
B
T
C
D
E
e
f
±0.025
±0.025
±0.010
±0.020
±0.020
(typical)
(typical)
(typical)
Solder pad finish: Ni /Au
Dimensions in mm
Recommended reflow soldering footprint
WL-CSP0201 SL
Footprint dimensions
A
B
C
0.28
0.19
0.17
Dimensions in mm
PPD ML PD
2022-05-12
Please read Cautions and warnings and
Page 4 of 12
Important notes at the end of this document.
Transient Voltage Suppressors – TVS
General purpose (GP) type
B74121G0160M060
SD0201SL-GP103
Recommended soldering profiles
Reflow soldering
Temperature ranges for reflow soldering acc. to IEC 60068-2-58 recommendations.
PPD ML PD
2022-05-12
Please read Cautions and warnings and
Page 5 of 12
Important notes at the end of this document.
Transient Voltage Suppressors – TVS
General purpose (GP) type
B74121G0160M060
SD0201SL-GP103
Profile feature
Symbol
Sn-Pb eutectic assembly
Pb-free assembly
Preheat and soak
– Temperature min.
– Temperature max.
– Time
Tsmin
Tsmax
100 °C
150 °C
150 °C
200 °C
tsmin to tsmax 60 … 120 s
60 … 120 s
Average ramp-up rate
Tsmax to Tp
3 °C/s max.
3 °C/s max.
Liquidous temperature
Time at liquidous
TL
tL
183 °C
217 °C
40 … 150 s
40 … 150 s
Classification temperature
Peak package body temperature
Time (tp) above (Tc -5 °C )
Average ramp-down rate
Tc
260 °C max.
215 … 260 °C
10 ... 40 s
260 °C max.
235 … 260 °C
10 ... 40 s
1)
Tp
tp
Tp to Tsmax
6 °C/s max.
maximum 8 min
6 °C/s max.
maximum 8 min
Time 25 °C to peak temperature
1) Depending on package thickness
Note: All temperatures refer to topside of the package, measured on the package body surface.
Number of reflow cycles: 3
Iron soldering should be avoided, hot air methods are recommended for repair purposes.
Soldering guidelines
Recommended solder
The use of no-clean solder products is recommended. In any case mild, non-activated fluxes should be
used. Flux residues after soldering should be minimized.
PPD ML PD
2022-05-12
Please read Cautions and warnings and
Page 6 of 12
Important notes at the end of this document.
Transient Voltage Suppressors – TVS
General purpose (GP) type
B74121G0160M060
SD0201SL-GP103
Taping and packaging
Tape and reel packing according to IEC 60286-3
Tape material: Cardboard
Component pitch in tape: 2 mm
Dimensions and tolerances
Definition
Symbol
Dimension
Definition
Tape width
W
8.0
±0.3
Package: 8-mm tape
Packing material: Plastic
Reel dimensions
Definition
Symbol
Dimension
mm
Tolerance
mm
Reel diameter
A
180
8.4
+0/-3
+1.5/-0
max.
Reel width (inside)
Reel width (outside)
W1
W2
14.4
Packing unit: 20000 pcs./ reel
PPD ML PD
2022-05-12
Please read Cautions and warnings and
Page 7 of 12
Important notes at the end of this document.
Transient Voltage Suppressors – TVS
General purpose (GP) type
B74121G0160M060
SD0201SL-GP103
Cautions and warnings
General
Some parts of this publication contain statements about the suitability of our transient voltage
suppressor (TVS) for certain areas of application, including recommendations about
incorporation/design-in of these products into customer applications. The statements are based on
our knowledge of typical requirements often made of our TVS devices in the particular areas. We
nevertheless expressly point out that such statements cannot be regarded as binding statements
about the suitability of our TVS components for a particular customer application. As a rule, TDK
Electronics is either unfamiliar with individual customer applications or less familiar with them than the
customers themselves. For these reasons, it is always incumbent on the customer to check and
decide whether the TVS devices with the properties described in the product specification are suitable
for use in a particular customer application.
•
•
•
Do not use TDK Electronics TVS components for purposes not identified in our specifications,
application notes and data books.
Ensure the suitability of a TVS in particular by testing it for reliability during design-in. Always
evaluate a TVS component under worst-case conditions.
Pay special attention to the reliability of TVS devices intended for use in safety-critical
applications (e.g. medical equipment, automotive, spacecraft, nuclear power plant).
Design notes
•
•
Always connect a TVS in parallel with the electronic circuit to be protected.
Consider maximum rated power dissipation if a TVS has insufficient time to cool down
between a number of pulses occurring within a specified isolated time period. Ensure that
electrical characteristics do not degrade.
•
•
•
•
Consider derating at higher operating temperatures. Choose the highest voltage class
compatible with derating at higher temperatures.
Surge currents beyond specified values will puncture a TVS. In extreme cases a TVS will
burst.
If steep surge current edges are to be expected, make sure your design is as low-inductance
as possible.
In some cases the malfunctioning of TVS components or failure before the end of their service
life cannot be completely ruled out in the current state of the art, even if they are operated as
specified. In applications requiring a very high level of operational safety and especially when
the malfunction or failure of a passive electronic component could endanger human life or
health (e.g. in accident prevention, life-saving systems, or automotive battery line applications
such as clamp 30), ensure by suitable design of the application or other measures (e.g.
installation of protective circuitry or redundancy) that no injury or damage is sustained by third
parties in the event of such a malfunction or failure.
•
Specified values only apply to TVS components that have not been subject to prior electrical,
mechanical or thermal damage. The use of TVS devices in line-to-ground applications is
therefore not advisable, and it is only allowed together with safety countermeasures like
thermal fuses.
PPD ML PD
2022-05-12
Please read Cautions and warnings and
Page 8 of 12
Important notes at the end of this document.
Transient Voltage Suppressors – TVS
General purpose (GP) type
B74121G0160M060
SD0201SL-GP103
Storage
•
•
Only store TVS in their original packaging. Do not open the package before storage.
Storage conditions in original packaging: temperature −25 to +45°C, relative humidity ≤75%
annual average, maximum 95%, dew precipitation is inadmissible.
Do not store TVS devices where they are exposed to heat or direct sunlight. Otherwise the
packaging material may be deformed or TVS may stick together, causing problems during
mounting.
•
•
•
Avoid contamination of the TVS surface during storage, handling and processing.
Avoid storing TVS devices in harmful environments where they are exposed to corrosive
gases for example (SOx, Cl).
•
•
Use TVS as soon as possible after opening factory seals such as polyvinyl-sealed packages.
Solder TVS components after shipment from TDK Electronics within the time specified:
o
TVS with Ni/Au termination, 12 months
Handling
•
•
•
•
Do not drop TVS components and allow them to be chipped.
Do not touch TVS with your bare hands - gloves are recommended.
Avoid contamination of the TVS surface during handling.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its
parts, which might lead to reduced reliability or lifetime.
Mounting
•
When TVS devices are encapsulated with sealing material or overmolded with plastic material,
electrical characteristics might be degraded and the life time reduced.
Make sure an electrode is not scratched before, during or after the mounting process.
Make sure contacts and housings used for assembly with TVS components are clean before
mounting.
•
•
•
•
The surface temperature of an operating TVS can be higher. Ensure that adjacent
components are placed at a sufficient distance from a TVS to allow proper cooling.
Avoid contamination of the TVS surface during processing.
Soldering
•
Complete removal of flux is recommended to avoid surface contamination that can result in an
instable and/or high leakage current.
•
•
•
Use resin-type or non-activated flux.
Bear in mind that insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended, otherwise a component may crack.
PPD ML PD
2022-05-12
Please read Cautions and warnings and
Page 9 of 12
Important notes at the end of this document.
Transient Voltage Suppressors – TVS
General purpose (GP) type
B74121G0160M060
SD0201SL-GP103
Operation
•
•
•
Use TVS only within the specified operating temperature range.
Use TVS only within specified voltage and current ranges.
Environmental conditions must not harm a TVS. Only use them in normal atmospheric
conditions. Reducing the atmosphere (e.g. hydrogen or nitrogen atmosphere) is prohibited.
Prevent a TVS from contacting liquids and solvents. Make sure that no water enters a TVS
(e.g. through plug terminals).
•
•
•
Avoid dewing and condensation.
TDK Electronics TVS components are mainly designed for encased applications. Under all
circumstances avoid exposure to:
o
o
o
o
o
direct sunlight
rain or condensation
steam, saline spray
corrosive gases
atmosphere with reduced oxygen content
•
TDK Electronics TVS devices are not suitable for switching applications or voltage stabilization
where static power dissipation is required.
This listing does not claim to be complete, but merely reflects the experience of TDK Electronics AG.
Display of ordering codes for TDK Electronics products
The ordering code for one and the same product can be represented differently in data sheets, data books,
other publications, on the company website, or in order-related documents such as shipping notes, order
confirmations and product labels. The varying representations of the ordering codes are due to different
processes employed and do not affect the specifications of the respective products. Detailed
information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes.
PPD ML PD
2022-05-12
Please read Cautions and warnings and
Page 10 of 12
Important notes at the end of this document.
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, we are either unfamiliar with individual customer applications or less familiar with them than
the customers themselves. For these reasons, it is always ultimately incumbent on the customer to
check and decide whether a product with the properties described in the product specification is
suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or failure
of an electronic component could endanger human life or health (e.g. in accident prevention or life-
saving systems), it must therefore be ensured by means of suitable design of the customer
application or other action taken by the customer (e.g. installation of protective circuitry or
redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.tdk-electronics.tdk.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and
Conditions of Supply.
7. Our manufacturing sites serving the automotive business apply the IATF 16949 standard.
The IATF certifications confirm our compliance with requirements regarding the quality
management system in the automotive industry. Referring to customer requirements and customer
specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting
individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral
requirements, we hereby like to emphasize that only requirements mutually agreed upon can
and will be implemented in our Quality Management System. For clarification purposes we like
to point out that obligations from IATF 16949 shall only become legally binding if individually agreed
upon.
Page 11 of 12
Important notes
8. The trade names EPCOS, CarXield, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas,
CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell,
MKD, MKK, ModCap, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap,
PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV,
ThermoFuse, WindCap, XieldCap are trademarks registered or pending in Europe and in other
countries.
Further
information
will
be
found
on the Internet
at
www.tdk-
electronics.tdk.com/trademarks.
Release 2020-06
Page 12 of 12
相关型号:
©2020 ICPDF网 联系我们和版权申明