B39941B8073P810 [TDK]
Duplexer, 897.5MHz(Tx), 942.5MHz(Rx), ROHS COMPLIANT, SMD, 9 PIN;
| 型号： | B39941B8073P810 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Duplexer, 897.5MHz(Tx), 942.5MHz(Rx), ROHS COMPLIANT, SMD, 9 PIN |
| 文件： | 总14页 (文件大小：195K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Components
SAW duplexer
WCDMA band VIII
Series/type:
B8073
Ordering code:
B39941B8073P810
Date:
Version:
February 28, 2013
2.3
EPCOS AG 2013. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Application
■ Low-loss SAW duplexer for mobile telephone
WCDMA Band VIII systems
■ Low insertion attenuation
■ Low amplitude ripple
■ Usable passband 35 MHz
■ Single ended to balanced transformation
in Antenna - Rx path
■ Impedance transformation 50Ω to 100Ω
in Antenna - Rx path
■ High Tx - Rx isolation
Features
0.43
0.33
■ Package size 2.0 x 1.6 mm2
■ Max. height 0.45 mm
■ RoHS compatible
■ Approximate weight 0.006g
■ Package for Surface Mount Technology
(SMT)
1
2
3
5
9
bottom view
7
6
0.7
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
■ Moisture Sensitive Level 3
side view
2.0
6
5
3
7
1
top view
2
Pin configuration
■ 1
■ 3,4
■ 6
TX input, single ended
RX output, balanced
Antenna
3
1
4
■ 2,5,7,8,9
Ground
5,8,9
2,7
6
Please read cautions and warnings and
important notes at the end of this document.
2
February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Characteristics
Temperature range for specification:
ANT terminating impedance:
TX terminating impedance:
T
ZANT
ZTX
ZRX
= –20 ˚C to +85 ˚C
=
=
50 Ω || 8.0nH
50 Ω
1)
1)
RX terminating impedance:
=
100 Ω (balanced)
Characteristics Tx - Ant
min.
typ.
max.
@ 25 ˚C
Center frequency
fC
—
897.5
—
MHz
Maximum insertion attenuation1)
2)
@fCarrier 882.4 ... 912.6 MHz
dB
dB
2.83) dB
αWCDMA
—
—
—
1.8
2.2
2.2
2.8
3.9
880.0 ... 915.0 MHz
880.0 ... 915.0 MHz
Amplitude ripple (p-p)
2)
@fCarrier 882.4 ... 912.6 MHz
∆αWCDMA
—
—
0.8
1.2
1.8
2.9
dB
dB
880.0 ... 915.0 MHz
Error Vector Magnitude
EVM4)
EVM4)
—
—
2.3
2.3
6.0
4.03)
%
%
@fCarrier 882.4 ... 912.6 MHz
@fCarrier 882.4 ... 912.6 MHz
VSWR
TX port
ANT port 880.0 ... 915.0 MHz
Attenuation
880.0 ... 915.0 MHz
—
—
1.8
1.7
2.1
2.0
α
0.3 ... 716.0 MHz
716.0 ... 728.0 MHz
728.0 ... 865.0 MHz
30
32
30
10
38
35
35
35
41
54
—
—
—
—
—
dB
dB
dB
dB
dB
865.0 ... 870.0 MHz
2)
@fCarrier 927.4 ... 957.6 MHz
αWCDMA
2)
455)
20
40
40
40
40
25
38
27
54
37
49
49
49
49
51
46
45
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
@fCarrier 927.4 ... 957.6 MHz
αWCDMA
1452.0 ... 1477.0 MHz
1565.42 ... 1573.374MHz
1573.374... 1577.466MHz
1577.466... 1585.42 MHz
1597.55 ... 1605.89 MHz
1670.0 ... 1675.0 MHz
1760.0 ... 1830.0 MHz
1830.0 ... 1880.0 MHz
1)
Appropriate matching network has to be applied towards PA and LNA. See page (8) for recom-
mendation
2)
3)
4)
5)
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (7).
T= +25˚C
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
T = +5˚C to +85˚C
Please read cautions and warnings and
important notes at the end of this document.
3
February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Characteristics
Temperature range for specification:
ANT terminating impedance:
TX terminating impedance:
T
ZANT
ZTX
ZRX
= –20 ˚C to +85 ˚C
=
=
50 Ω || 8.0nH
50 Ω
1)
1)
RX terminating impedance:
=
100 Ω (balanced)
Characteristics Tx - Ant
min.
typ.
max.
@ 25 ˚C
1)
2110.0 ... 2170.0 MHz
2400.0 ... 2500.0 MHz
2620.0 ... 2640.0 MHz
2640.0 ... 2745.0 MHz
3520.0 ... 3660.0 MHz
4400.0 ... 4575.0 MHz
5100.0 ... 5490.0 MHz
5490.0 ... 5850.0 MHz
27
30
28
30
20
20
15
10
40
36
35
35
32
32
24
17
—
dB
dB
dB
dB
dB
dB
dB
dB
—
—
—
—
—
—
—
Characteristics Tx - Rx
min.
typ.
max.
@ 25 ˚C
Differential Mode Isolation
2)
2)
2)
@fCarrier 882.4 ... 912.6 MHz
αWCDMA
αWCDMA
αWCDMA
56
45
60
57
57
—
—
—
dB
dB
dB
@fCarrier 927.4 ... 957.6 MHz
@fCarrier 927.4 ... 957.6 MHz
503)
Common Mode Isolation
2)
@fCarrier 882.4 ... 912.6 MHz
αWCDMA
55
65
—
dB
1)
Appropriate matching network has to be applied towards PA and LNA. See page (8) for recom-
mendation
2)
3)
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (7).
T= +5˚C to +85˚C
Please read cautions and warnings and
important notes at the end of this document.
4
February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Characteristics
Temperature range for specification:
ANT terminating impedance:
TX terminating impedance:
T
ZANT
ZTX
ZRX
= –20 ˚C to +85 ˚C
=
=
50 Ω || 8.0nH
50 Ω
100 Ω (balanced) 1)
1)
RX terminating impedance:
=
Characteristics Rx - Ant
Center frequency1)
min.
typ.
@ 25 ˚C
942.5
max.
fC
—
—
MHz
Maximum insertion attenuation
2)
@fCarrier 927.4 ... 957.6 MHz
αWCDMA
—
—
—
—
1.8
2.2
2.2
2.2
2.5
4.7
dB
dB
925.0 ... 960.0 MHz
925.0 ... 960.0 MHz
925.0 ... 960.0 MHz
3.23) dB
3.74) dB
Amplitude ripple (p-p)
2)
@fCarrier 927.4 ... 957.6 MHz
∆αWCDMA
—
—
0.6
1.0
1.3
3.5
dB
dB
925.0 ... 960.0 MHz
Error Vector Magnitude
EVM5)
EVM5)
—
—
3.3
3.3
8.5
%
%
@fCarrier 927.4 ... 957.6 MHz
4.53)
@fCarrier 927.4 ... 957.6 MHz
VSWR
RX port
925.0 ... 960.0 MHz
925.0 ... 960.0 MHz
—
—
1.8
1.7
2.1
2.0
ANT port
Common Mode Rejection Ratio
925.0 ... 960.0 MHz
α
α
23
30
dB
Attenuation
0.3 ... 462.0 MHz
462.0 ... 480.0 MHz
480.0 ... 835.0 MHz
835.0 ... 870.0 MHz
870.0 ... 880.0 MHz
35
45
38
56
38
90
86
66
66
66
—
—
—
—
—
dB
dB
dB
dB
dB
2)
@fCarrier 882.4 ... 912.6 MHz
αWCDMA
50
56
—
dB
980.0 ... 1045.0 MHz
1045.0 ... 2400.0 MHz
2400.0 ... 2500.0 MHz
2500.0 ... 4810.0 MHz
5100.0 ... 5825.0 MHz
16
35
45
35
35
19
58
58
55
52
—
—
—
—
—
dB
dB
dB
dB
dB
1)
Appropriate matching network has to be applied towards PA and LNA. See page (8) for recom-
mendation
2)
3)
4)
5)
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (7).
T= +25˚C
T= +5˚C to +85˚C
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
Please read cautions and warnings and
important notes at the end of this document.
5
February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Characteristics
Temperature range for specification:
ANT terminating impedance:
TX terminating impedance:
T
ZANT
ZTX
= –20 ˚C to +85 ˚C
=
=
50 Ω || 8.0nH
50 Ω 1)
RX terminating impedance:
ZRX = 100 Ω (balanced)1)
Characteristics Rx - Ant
min.
typ.
max.
@ 25˚C
IMD Product Level Limit 2)
at fTX = 897.5 MHz fRX = 942.5 MHz
Blocker 1
Blocker 2
Blocker 3
45.0MHz
852.5MHz
1840.0MHz
-
-
-130
-115
-
-
dBm
dBm
-
-111
-
dBm
1) Appropriate matching network has to be applied towards PA and LNA. See page (8) for recom-
mendation
2) IMD product level limits for power levels PTX= 21dBm (antenna port output power) and
PBlocker= -15dBm (antenna port input power).
Please read cautions and warnings and
important notes at the end of this document.
6
February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Maximum ratings
Operable temperature
range1)
Storage temperature range Tstg
T
–30/+85 ˚C
–40/+85 ˚C
DC voltage
VDC
5
V
V
V
V
MM, +/- 10 pulses
ESD voltage
ESD voltage
ESD voltage
Input power at
VESD
VESD
VESD
PIN
1002)
3003)
6004)
HBM, +/- 1 pulse
CDM, +/- 3 pulses
WCDMA signal
55 ˚C, 10000 h
880.0 ... 915.0 MHz
elsewhere
30
10
dBm
dBm
}
1)
Defines the temperature range in which the SAW device keeps its typical characteristics, however the
specification values are not guaranteed.
2)
3)
4)
acc. to JESD22-A115B (machine model), 10 negative & 10 positive pulses
target, acc. to JESD22-A114F (human body model), 1 negative & 1 positive pulses.
target, acc. to JESD22-C101C (charge device model), 3 negative & 3 positive pulses.
Annotation for characteristics section
Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by
∞
Sds21(f)HRRC(f – fCarrier) 2df
∫
∞
f
Carrier according to 3GPP TS 25.101 (e.g. for UMTS-Passband, fCarrier ranges from 2112.4 MHz
(lowest Rx channel) to 2167.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the
root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following
normalization:
∞
HRRC(f) 2df= 1
∫
∞
Please read cautions and warnings and
important notes at the end of this document.
7
February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Matching circuit to terminating impedances
(element values depend upon pcb layout)
3
Rx,
Lp2
100Ω
4
6
Ant, 50Ω
Lp1
1
Tx, 50Ω
Ls1
Lp1 = 8.0nH
Lp2 = 41.0nH
Ls1 = 2.2nH
Please read cautions and warnings and
important notes at the end of this document.
8
February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Frequency Response TX-ANT (Power transfer function)
Frequency Response TX-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
9
February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Frequency Response ANT - RX (Power transfer function)
Frequency Response ANT - RX (wideband)
Please read cautions and warnings and
important notes at the end of this document.
10 February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Frequency Response TX - RX (Power transfer function, differential mode)
Frequency Response TX - RX (Power transfer function, common mode)
Please read cautions and warnings and
important notes at the end of this document.
11 February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
Frequency Response VSWR
Please read cautions and warnings and
important notes at the end of this document.
12 February 28, 2013
SAW Components
SAW duplexer
Data Sheet
B8073
897.5 / 942.5 MHz
References
Type
B8073
Ordering code
Marking and package
Packaging
B39941B8073P810
C61157-A8-A39
F61047-V8247-Z000
L_1126
Date codes
B8073_NB_UN.s4p, B8073_WB_UN.s4p
S-parameters
see file header for port/pin assignment table
Soldering profile
RoHS compatible
S_6001
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2013. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
13 February 28, 2013
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
14 February 28, 2013
相关型号：
B39941B9450K610
SAW Filter, 1 Function(s), 942.5MHz, 5 Pin(s), Plastic, ROHS COMPLIANT, SMD, QCS5F, 5 PIN
EPCOS
©2020 ICPDF网 联系我们和版权申明