B39941B9512P810 [TDK]
Duplexer, 942.5MHz(Tx), 881.5MHz(Rx), ROHS COMPLIANT, SMD, 10 PIN;
| 型号： | B39941B9512P810 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Duplexer, 942.5MHz(Tx), 881.5MHz(Rx), ROHS COMPLIANT, SMD, 10 PIN |
| 文件： | 总12页 (文件大小：153K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Components
SAW Rx 2in1 input diplex filter
GSM 850 / GSM 900
Series/type:
B9512
Ordering code:
B39941B9512P810
Date:
Version:
June 04, 2010
2.0
EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW Rx 2in1 input diplex filter
Data sheet
B9512
881.5 / 942.5 MHz
Application
■ Low-loss 2in1 RF filter for mobile telephone
GSM 900 and GSM 850 systems, receive path (Rx)
■ Usable passband:
Filter 1 (GSM 900): 35 MHz
Filter 2 (GSM 850): 25 MHz
■ Unbalanced to balanced operation for all filters
■ Impedance transformation from 50 Ω to 150 Ω for
both filters
■ Low amplitude ripple
■ Suitable for GPRS class 1 to 12
Features
0.60
0.235
■ Package size 1.8 x 1.4 x 0.68 mm3
■ RoHS compatible
0.60
1
2
8
3
7
4
■ Approx. weight 0.006 g
■ Package for Surface Mount Technology (SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
■ Moisture Sensitive Level 3
bottom view
10
5
0.15
9
6
0.235
0.0775
side view
1.80
top view
Pin configuration
9
1
■ 1
Input [Diplex]
■ 8,9
■ 6,7
■ 4
Output, balanced [Filter 1]
Output, balanced [Filter 2]
To be grounded
8
7
■ 2,3,5,10
Case-ground
6
4
2,3,5,10
Please read cautions and warnings and
important notes at the end of this document.
2
June 04, 2010
SAW Components
SAW Rx 2in1 input diplex filter
Data sheet
B9512
881.5 / 942.5 MHz
Characteristics of filter 1 ( GSM 900 )
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T
ZS
ZL
=
=
=
-30 ˚C to +85 ˚C
50 Ω ||10 nH (unbalanced)
150 Ω || 40 nH (balanced)
min.
typ.
max.
@ 25 ˚C
fC
—
942.5
1.91)
0.8
—
MHz
dB
Center frequency
Maximum insertion attenuation
αmax
925.0 ... 960.0 MHz
—
—
—
—
23
3.1
1.8
2.1
2.1
—
Amplitude ripple (p-p)
∆α
925.0 ... 960.0 MHz
dB
Input VSWR
925.0 ... 960.0 MHz
1.7
Output VSWR
925.0 ... 960.0 MHz
1.8
Common mode rejection ratio
925.0 ... 960.0 MHz
28
dB
Attenuation
α
10.0 ... 480.0 MHz
480.0 ... 825.0 MHz
825.0 ... 905.0 MHz
905.0 ... 915.0 MHz
980.0 ... 1000.0 MHz
1000.0 ... 1850.0 MHz
1850.0 ... 1920.0 MHz
1920.0 ... 5000.0 MHz
5000.0 ... 6000.0 MHz
45
39
25
15
23
26
40
35
30
55
44
30
20
27
28
48
42
36
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
1)
Typical value excluding PCB losses.
Please read cautions and warnings and
important notes at the end of this document.
3
June 04, 2010
SAW Components
SAW Rx 2in1 input diplex filter
Data sheet
B9512
881.5 / 942.5 MHz
Maximum ratings of filter 1
Operable temperature range T
Storage temperature range Tstg
–40/+85
–40/+85
5
˚C
˚C
V
DC voltage
VDC
ESD voltage
machine model, 1 pulse
VESD
1001)
V
Input power at
GSM 850, GSM 900
GSM 1800, GSM 1900 PIN
Tx bands
PIN
15
15
dBm
dBm
effective power in the on-state,
duty cycle 4:8
1)
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Please read cautions and warnings and
important notes at the end of this document.
4
June 04, 2010
SAW Components
SAW Rx 2in1 input diplex filter
Data sheet
B9512
881.5 / 942.5 MHz
Transfer function of filter 1
Transfer function of filter 1 - wideband
Please read cautions and warnings and
important notes at the end of this document.
5
June 04, 2010
SAW Components
SAW Rx 2in1 input diplex filter
Data sheet
B9512
881.5 / 942.5 MHz
Smith Charts filter 1
S11 function
S
22 function
Please read cautions and warnings and
important notes at the end of this document.
6
June 04, 2010
SAW Components
SAW Rx 2in1 input diplex filter
Data sheet
B9512
881.5 / 942.5 MHz
Characteristics of filter 2 ( GSM 850 )
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T
ZS
ZL
=
=
=
-30 ˚C to +85 ˚C
50 Ω || 10 nH (unbalanced)
150 Ω || 56 nH (balanced)
min.
typ.
max.
@ 25 ˚C
fC
—
881.5
—
MHz
Center frequency
Maximum insertion attenuation
αmax
869.0 ... 894.0 MHz
—
—
—
—
20
1.71)
0.7
1.5
1.6
24
2.3
1.3
2.0
2.0
—
dB
dB
Amplitude ripple (p-p)
∆α
869.0 ... 894.0 MHz
Input VSWR
869.0 ... 894.0 MHz
Output VSWR
869.0 ... 894.0 MHz
Common mode rejection ratio
869.0 ... 894.0 MHz
dB
Attenuation
α
10.0 ... 447.0 MHz
447.0 ... 849.0 MHz
914.0 ... 1000.0 MHz
1000.0 ... 1850.0 MHz
1850.0 ... 1920.0 MHz
1920.0 ... 5000.0 MHz
5000.0 ... 6000.0 MHz
45
30
24
28
37
33
30
50
32
28
31
43
40
34
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
1)
Typical value excluding PCB losses.
Please read cautions and warnings and
important notes at the end of this document.
7
June 04, 2010
SAW Components
SAW Rx 2in1 input diplex filter
Data sheet
B9512
881.5 / 942.5 MHz
Maximum ratings of filter 2
Operable temperature range T
Storage temperature range Tstg
–40/+85
–40/+85
5
˚C
˚C
V
DC voltage
VDC
ESD voltage
machine model, 1 pulse
VESD
1001)
V
Input power at
GSM 850, GSM 900
GSM 1800, GSM 1900 PIN
Tx bands
PIN
15
15
dBm
dBm
effective power in the on-state,
duty cycle 4:8
1)
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Please read cautions and warnings and
important notes at the end of this document.
8
June 04, 2010
SAW Components
SAW Rx 2in1 input diplex filter
Data sheet
B9512
881.5 / 942.5 MHz
Transfer function of filter 2
Transfer function of filter 2 - wideband
Please read cautions and warnings and
important notes at the end of this document.
9
June 04, 2010
SAW Components
SAW Rx 2in1 input diplex filter
Data sheet
B9512
881.5 / 942.5 MHz
Smith Charts filter 2
S11 function
S
22 function
Please read cautions and warnings and
important notes at the end of this document.
10 June 04, 2010
SAW Components
SAW Rx 2in1 input diplex filter
Data sheet
B9512
881.5 / 942.5 MHz
References
Type
B9512
Ordering code
Marking and package
Packaging
B39941B9512P810
C61157-A7-A152
F61074-V8226-Z000
L_1126
Date codes
B9512_LB_NB.s3p
B9512_LB_WB.s3p
B9512_UB_NB.s3p
B9512_UB_WB.s3p
S-parameters
see file header for port/pin assignment table
Soldering profile
RoHS compatible
S_6001
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2010. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
11 June 04, 2010
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
12 June 04, 2010
相关型号：
©2020 ICPDF网 联系我们和版权申明