B39232B9609P810 [TDK]

SAW Filter,;
B39232B9609P810
型号: B39232B9609P810
厂家: TDK ELECTRONICS    TDK ELECTRONICS
描述:

SAW Filter,

LTE
文件: 总8页 (文件大小:130K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SAW Components  
Band 40 BAW filter  
Series/type:  
B9609  
Ordering code:  
B39232B9609P810  
Date:  
Version:  
July 22, 2013  
2.0  
EPCOS AG 2013. Reproduction, publication and dissemination of this data sheet, enclosures  
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.  
SAW Components  
Band 40 BAW filter  
Datasheet  
B9609  
2350.0 MHz  
Application  
Low-loss RF filter for LTE Full Band 40 with Blue-  
tooth/WLAN Coexistance  
Usable passband: 100.0 MHz  
Unbalanced to unbalanced operation  
Good insertion attenuation  
High out of band selectivity  
Filter impedance 50 Ω  
Features  
0.25  
2
5
3
4
Package size 1.4 x1.1 x 0.4 mm3  
RoHS compatible  
Approximate weight 0.003 g  
Package for Surface Mount Technology (SMT)  
Ni, gold-plated terminals  
bottom view  
0.50.5  
Electrostatic Sensitive Device (ESD)  
Moisture Sensitivity Level 3  
side view  
top view  
1.4  
Pin configuration  
1  
4  
Input unbalanced  
Output unbalanced  
2,3,5 To be grounded  
Please read cautions and warnings and  
important notes at the end of this document.  
2
July 22, 2013  
SAW Components  
Band 40 BAW filter  
Datasheet  
B9609  
2350.0 MHz  
Characteristics  
Temperature range for specification:  
Terminating source impedance:  
Terminating load impedance:  
T
ZS  
ZL  
= –20 ˚C to +85 ˚C  
=
=
50 || 6.8nH  
50 Ω (unbalanced)  
min.  
typ.  
max.  
@ 25 ˚C  
2350.0  
Center frequency  
fC  
αmax  
MHz  
Maximum insertion attenuation  
2300.0 ... 2400.0 MHz  
2300.0 ... 2400.0 MHz  
2.6  
1.61)  
4.5  
dB  
dB  
Amplitude ripple (p-p)  
∆α  
2300.0 ... 2400.0 MHz  
1.5  
2.0  
3.4  
2.4  
dB  
VSWR (Input and Output)  
2300.0 ... 2400.0 MHz  
Attenuation  
α
100.0 ... 1574.0 MHz  
1574.0 ... 1680.0 MHz  
1845.0 ... 1880.0 MHz  
2110.0 ... 2170.0 MHz  
2423.0 ... 2441.0 MHz  
2428.0 ... 2446.0 MHz  
2450.0 ... 2500.0 MHz  
4600.0 ... 4800.0 MHz  
22  
22  
25  
33  
24  
45  
36  
8
24  
24  
27  
36  
55  
54  
39  
13  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
dB  
1)  
Averaged over passband  
Please read cautions and warnings and  
important notes at the end of this document.  
3
July 22, 2013  
SAW Components  
Band 40 BAW filter  
Datasheet  
B9609  
2350.0 MHz  
Maximum ratings  
Operable temperature range T  
Storage temperature range Tstg  
–30/+85 ˚C  
–40/+85 ˚C  
DC voltage  
VDC  
5
V
501)  
5002)  
6003)  
V
V
V
Machine model  
ESD voltage  
ESD voltage  
ESD voltage  
VESD  
VESD  
VESD  
Human Body model  
Charge Device model  
Input power at  
LTE 10MHz Uplink signal, 55˚C ,  
2000hr  
PIN  
PIN  
27.5  
31.0  
dBm  
dBm  
2300.0 - 2400.0 MHz  
Input power at  
LTE 10MHz Uplink signal, 55˚C ,  
Instantaneous Breakdown  
2300.0 - 2400.0 MHz  
1)  
acc. to JESD22-A115A  
acc. to JESD22-A114F  
acc. to JESD22-C101  
2)  
3)  
Please read cautions and warnings and  
important notes at the end of this document.  
4
July 22, 2013  
SAW Components  
Band 40 BAW filter  
Datasheet  
B9609  
2350.0 MHz  
Transfer function  
Transfer function (wideband)  
Please read cautions and warnings and  
important notes at the end of this document.  
5
July 22, 2013  
SAW Components  
Band 40 BAW filter  
Datasheet  
B9609  
2350.0 MHz  
S11 VSWR  
S22 VSWR  
Please read cautions and warnings and  
important notes at the end of this document.  
6
July 22, 2013  
SAW Components  
Band 40 BAW filter  
Datasheet  
B9609  
2350.0 MHz  
References  
Type  
B9609  
Ordering code  
Marking and package  
Packaging  
B39232B9609P810  
C61157-A8-A80  
F61074-V8212-Z000  
L_1126  
Date codes  
B9609_NB.s2p, B9609_WB.s2p  
S-parameters  
See file header for port/pin assignment table.  
Soldering profile  
RoHS compatible  
S_6001  
RoHS-compatible means that products are compatible with the  
requirements according to Art. 4 (substance restrictions) of Di-  
rective 2011/65/EU of the European Parliament and of the  
Council of June 8th, 2011, on the restriction of the use of certain  
hazardous substances in electrical and electronic equipment  
("Directive") with due regard to the application of exemptions as  
per Annex III of the Directive in certain cases.  
Moldability  
Before using in overmolding environment, please contact your  
EPCOS sales office.  
Matching coils  
See Inductor pdf-catalog  
http://www.tdk.co.jp/tefe02/coil.htm#aname1  
and Data Library for circuit simulation  
http://www.tdk.co.jp/etvcl/index.htm  
For further information please contact your local EPCOS sales office or visit our webpage at  
www.epcos.com .  
Published by EPCOS AG  
Systems, Acoustics, Waves Business Group  
P.O. Box 80 17 09, 81617 Munich, GERMANY  
EPCOS AG 2013. This brochure replaces the previous edition.  
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or  
the international Representatives.  
Due to technical requirements components may contain dangerous substances. For information on  
the type in question please also contact one of our Sales Offices.  
Please read cautions and warnings and  
important notes at the end of this document.  
7
July 22, 2013  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical  
requirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application.  
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar  
with them than the customers themselves. For these reasons, it is always ultimately  
incumbent on the customer to check and decide whether an EPCOS product with the  
properties described in the product specification is suitable for use in a particular customer  
application.  
2. We also point out that in individual cases, a malfunction of electronic components or  
failure before the end of their usual service life cannot be completely ruled out in the  
current state of the art, even if they are operated as specified. In customer applications  
requiring a very high level of operational safety and especially in customer applications in  
which the malfunction or failure of an electronic component could endanger human life or  
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by  
means of suitable design of the customer application or other action taken by the customer  
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained  
by third parties in the event of malfunction or failure of an electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as hazardous). Useful information on this will be found in our  
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more  
detailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order.  
We also reserve the right to discontinue production and delivery of products. Conse-  
quently, we cannot guarantee that all products named in this publication will always be  
available. The aforementioned does not apply in the case of individual agreements deviating  
from the foregoing for customer-specific products.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current  
version of the “General Terms of Delivery for Products and Services in the Electrical  
Industry” published by the German Electrical and Electronics Industry Association  
(ZVEI).  
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,  
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,  
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,  
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap  
are trademarks registered or pending in Europe and in other countries. Further information  
will be found on the Internet at www.epcos.com/trademarks.  
8
July 22, 2013  

相关型号:

B39234-X6756-M100

SAW bandpass filter Bandpass Filter for Digital Cable Applications
EPCOS

B39241-B3655-U210

Low-Loss Filter
EPCOS

B39241-B3865-H510

SAW Components Low-Loss Filter 240,0 MHz
EPCOS

B39241-B3873-U210

SAW Components Low-Loss Filter 240,0 MHz
EPCOS

B39241-B4849-U310

SAW Filter, 1 Function(s), 241MHz, CERAMIC, QCC-8
EPCOS

B39241-B4909-Z910

SAW Filter, 1 Function(s), 238.55MHz
EPCOS

B39241-R688-B110

1-Port Saw Resonator, 239.75MHz Nom, METAL CAN, TO-39, 3 PIN
EPCOS

B39241B5043Z710

SAW Filter, 1 Function(s), 238.5MHz, ROHS COMPLIANT, CERAMIC, SMD, QCC10B, 10 PIN
EPCOS

B39241B5043Z710

Passive Filter
TDK

B39242-B7766-C911

SAW Components Low-Loss Filter 2441,75 MHz
EPCOS

B39242-B7809-A510

SAW Components Low-Loss Filter for Mobile Communication 2441,75 MHz
EPCOS

B39242-B7841-C710

SAW Components Low-Loss Filter 2441,75 MHz
EPCOS