B39234-X6756-M100 [EPCOS]

SAW bandpass filter Bandpass Filter for Digital Cable Applications; 数字电缆应用SAW带通滤波器带通滤波器
B39234-X6756-M100
型号: B39234-X6756-M100
厂家: EPCOS    EPCOS
描述:

SAW bandpass filter Bandpass Filter for Digital Cable Applications
数字电缆应用SAW带通滤波器带通滤波器

文件: 总7页 (文件大小:83K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SAW Components  
SAW bandpass filter  
Bandpass Filter for Digital Cable Applications  
Series/type:  
X 6756 M  
Ordering code:  
B39234-X6756-M100  
Date:  
Version:  
June 22, 2006  
2.0  
EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures  
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.  
SAW Components  
SAW bandpass filter  
Data sheet  
X 6756 M  
23.40 MHz  
Application  
Constant group delay  
Low group delay ripple  
Low sideband suppression  
Usable bandwidth 2.3 MHz  
Balanced input option  
Features  
Plastic package SIP5K  
Approximate weight 1.0 g  
RoHS compatible  
Tinned CuFe alloy terminals  
Pin configuration  
1  
2  
3  
4  
5  
Input  
Input - ground  
Chip carrier - ground  
Output  
Output  
Please read cautions and warnings and  
important notes at the end of this document.  
2
June 22, 2006  
SAW Components  
SAW bandpass filter  
Data sheet  
X 6756 M  
23.40 MHz  
Characteristics  
Reference temperature:  
TA = 25 ˚C  
Terminating source impedance:  
Terminating load impedance:  
ZS = 50 Ω  
ZL = 2 k|| 3 pF  
min.  
typ.  
max.  
@ 25 ˚C  
Insertion attenuation  
Reference level for the  
following data  
α
23.40 MHz  
13.0  
14.5  
16.0  
dB  
Amplitude ripple in passband (p-p)  
22.65 ... 24.15 MHz  
Pass bandwith  
∆α  
0.5  
MHz  
αrel 3 dB  
B3dB  
B10dB  
B30dB  
2.3  
3.0  
3.7  
MHz  
MHz  
MHz  
α
rel 10 dB  
αrel 30 dB  
Relative attenuation  
αrel  
Lower sidelobe  
13.00 ... 17.50 MHz  
17.50 ... 21.20 MHz  
25.70 ... 30.00 MHz  
30.00 ... 50.00 MHz  
36.0  
35.0  
29.0  
39.0  
42.0  
41.0  
35.0  
45.0  
dB  
dB  
dB  
dB  
Upper sidelobe  
Reflected wave signal suppression  
1.3 µs ... 6.0 µs after main pulse  
(test pulse 250 ns,  
50.0  
50.0  
30  
dB  
dB  
ns  
carrier frequency 23.40 MHz)  
Feedthrough signal suppression  
1.3 µs ... 1.2 µs before main pulse  
(test pulse 250 ns,  
carrier frequency 23.40 MHz)  
Group delay ripple (p-p)  
t  
22.65 ... 24.15 MHz  
Impedance at 23.40 MHz  
Input: ZIN = RIN || CIN  
Output: ZOUT = ROUT || COUT  
2.0||12.8  
5.0|| 3.6  
k|| pF  
k|| pF  
–72  
ppm/K  
Temperature coefficient of frequency TCf  
Maximum ratings  
Operable temperature range T  
Storage temperature range Tstg  
–40 / +65 ˚C  
–40 / +85 ˚C  
DC voltage  
AC voltage  
VDC  
Vpp  
5
V
V
between any terminals  
between any terminals  
10  
Please read cautions and warnings and  
important notes at the end of this document.  
3
June 22, 2006  
SAW Components  
SAW bandpass filter  
Data sheet  
X 6756 M  
23.40 MHz  
Frequency response  
Please read cautions and warnings and  
important notes at the end of this document.  
4
June 22, 2006  
SAW Components  
SAW bandpass filter  
Data sheet  
X 6756 M  
23.40 MHz  
Frequency response  
Time domain response  
Please read cautions and warnings and  
important notes at the end of this document.  
5
June 22, 2006  
SAW Components  
SAW bandpass filter  
Data sheet  
X 6756 M  
23.40 MHz  
References  
Type  
X 6756 M  
Ordering code  
Marking and package  
Packaging  
B39234-X6756-M100  
C61157-A1-A15  
F61074-V8067-Z000  
L_1126  
Date codes  
S-parameters  
Soldering profile  
RoHS compatible  
X6756M_NB.s4p  
S_6001  
defined as compatible with the following documents:  
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT  
AND OF THE COUNCIL of 27 January 2003 on the restriction  
of the use of certain hazardous substances in electrical and  
electronic equipment. 2005/618/EC from April 18th, 2005,  
amending Directive 2002/95/EC of the European Parliament  
and of the Council for the purposes of establishing the maxi-  
mum concentration values for certain hazardous substances in  
electrical and electronic equipment."  
For further information please contact your local EPCOS sales office or visit our webpage at  
www.epcos.com .  
Published by EPCOS AG  
Surface Acoustic Wave Components Division  
P.O. Box 80 17 09, 81617 Munich, GERMANY  
EPCOS AG 2006. This brochure replaces the previous edition.  
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or  
the international Representatives.  
Due to technical requirements components may contain dangerous substances. For information on  
the type in question please also contact one of our Sales Offices.  
Please read cautions and warnings and  
important notes at the end of this document.  
6
June 22, 2006  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical  
requirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application.  
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar  
with them than the customers themselves. For these reasons, it is always ultimately incum-  
bent on the customer to check and decide whether an EPCOS product with the properties  
described in the product specification is suitable for use in a particular customer application.  
2. We also point out that in individual cases, a malfunction of passive electronic compo-  
nents or failure before the end of their usual service life cannot be completely ruled  
out in the current state of the art, even if they are operated as specified. In customer  
applications requiring a very high level of operational safety and especially in customer appli-  
cations in which the malfunction or failure of a passive electronic component could endanger  
human life or health (e.g. in accident prevention or life-saving systems), it must therefore be  
ensured by means of suitable design of the customer application or other action taken by the  
customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is  
sustained by third parties in the event of malfunction or failure of a passive electronic compo-  
nent.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as “hazardous”). Useful information on this will be found in our  
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more  
detailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order.  
We also reserve the right to discontinue production and delivery of products. Conse-  
quently, we cannot guarantee that all products named in this publication will always be avail-  
able.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-  
sion of the “General Terms of Delivery for Products and Services in the Electrical  
Industry” published by the German Electrical and Electronics Industry Association  
(ZVEI).  
7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, Silver-  
Cap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered  
or pending in Europe and in other countries. Further information will be found on the Internet  
at www.epcos.com/trademarks.  
7
June 22, 2006  

相关型号:

B39241-B3655-U210

Low-Loss Filter
EPCOS

B39241-B3865-H510

SAW Components Low-Loss Filter 240,0 MHz
EPCOS

B39241-B3873-U210

SAW Components Low-Loss Filter 240,0 MHz
EPCOS

B39241-B4849-U310

SAW Filter, 1 Function(s), 241MHz, CERAMIC, QCC-8
EPCOS

B39241-B4909-Z910

SAW Filter, 1 Function(s), 238.55MHz
EPCOS

B39241-R688-B110

1-Port Saw Resonator, 239.75MHz Nom, METAL CAN, TO-39, 3 PIN
EPCOS

B39241B5043Z710

SAW Filter, 1 Function(s), 238.5MHz, ROHS COMPLIANT, CERAMIC, SMD, QCC10B, 10 PIN
EPCOS

B39241B5043Z710

Passive Filter
TDK

B39242-B7766-C911

SAW Components Low-Loss Filter 2441,75 MHz
EPCOS

B39242-B7809-A510

SAW Components Low-Loss Filter for Mobile Communication 2441,75 MHz
EPCOS

B39242-B7841-C710

SAW Components Low-Loss Filter 2441,75 MHz
EPCOS

B39242-B7873-C713

SAW Components Low-Loss Filter 2450,0 MHz
EPCOS