B39202B9619P810 [TDK]
SAW Components SAW Filter for smallcells;
| 型号： | B39202B9619P810 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | SAW Components SAW Filter for smallcells |
| 文件： | 总9页 (文件大小：143K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Components
SAW Filter for smallcells
Band II Downlink
Series/type:
B9619
Ordering code:
B39202B9619P810
Date:
Version:
November 21, 2014
1.1
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
SAW Filter
B9619
1960.00 MHz
Preliminary data
Revision History: Changes compared to previous iteration issue
ISSUE
ORIGINATOR
DETAILED SEPECIFICATION CHANGES
initial release
DATE
DGAH35S01 Huang Lijun
DGAH35S02 Huang Lijun
AH35A_v1.0 Huang Lijun
B9619_v1.0 Huang Lijun
B9619_v1.1 Ng Say Loon
20.12.2013
31.12.2013
26.03.2014
14.08.2014
update application line
First Sample release
Pilot run Sample release
Change typical EVM value from 2.4% to 3.8% 21.11.2014
Please read cautions and warnings and
important notes at the end of this document.
2
November 21, 2014
SAW Components
SAW Filter
B9619
1960.00 MHz
Preliminary data
Application
■ Low-loss RF filter for smallcells
■ Useable passband 58.8 MHz
■ No matching network required for operation at 50 Ω
■ Unbalanced to unbalanced operation
Features
0.25
■ Package size 1.4 x 1.1 mm2
■ Max Package height 0.4 mm
■ Package code QCS5P
2
5
3
4
bottom view
■ RoHS compatible
■ Approximate weight 0.003 g
■ Package for Surface Mount Technology (SMT)
■ Ni, gold-plated terminals
0.50.5
■ Electrostatic Sensitive Device (ESD)
■ Moisture Sensitivity Level 3
side view
top view
1.4
Pin configuration
■ 1
■ 4
Input
Output
■ 2,3,5 To be grounded
1
4
3
2,5
Please read cautions and warnings and
important notes at the end of this document.
3
November 21, 2014
SAW Components
SAW Filter
B9619
1960.00 MHz
Preliminary data
Characteristics
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T
ZS
ZL
= –10 ˚C to +85 ˚C
=
=
50 Ω
50 Ω
min.
typ.
max.
@ 25 ˚C
1960.00
Center frequency
fC
—
—
MHz
dB
Maximum insertion attenuation
1930.6 ... 1989.4 MHz αmax
—
—
2.5
1.4
4.2
2.6
Amplitude ripple (p-p)
1930.6 ... 1989.4 MHz ∆α
dB
Error Vector Magnitude
EVM1)
—
—
—
3.8
1.8
1.8
4.5
%
@fCarrier
1933.0 ... 1987.0 MHz
Input VSWR
1930.6 ... 1989.4 MHz
2.3
2.4
Output VSWR
Attenuation
1930.6 ... 1989.4 MHz
α
50.0 ... 1500.0 MHz
1500.0 ... 1907.0 MHz
1907.0 ... 1909.4 MHz
2040.0 ... 2070.0 MHz
2070.0 ... 2500.0 MHz
2500.0 ... 4500.0 MHz
4500.0 ... 5200.0 MHz
5200.0 ... 6000.0 MHz
43
43
40
35
35
31
31
22
54
45
45
48
45
37
37
28
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
1)
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
Please read cautions and warnings and
important notes at the end of this document.
4
November 21, 2014
SAW Components
SAW Filter
B9619
1960.00 MHz
Preliminary data
Maximum ratings
Operable temperature range T
Storage temperature range Tstg
–40/+85 ˚C
–40/+85 ˚C
DC voltage
VDC
0
501)
V
V
machine model, 10 pulses
CW, signal @ T=55˚C, 2000h
ESD voltage
Input power at
VESD
1930.6 ... 1989.4 MHz PIN
16
dBm
1)
acc. to JESD22-A115B (machine model), +/- 10 pulses.
Please read cautions and warnings and
important notes at the end of this document.
5
November 21, 2014
SAW Components
SAW Filter
B9619
1960.00 MHz
Preliminary data
Transfer function (S21, Narrowband)
Transfer function (S21, Wideband)
Please read cautions and warnings and
important notes at the end of this document.
6
November 21, 2014
SAW Components
SAW Filter
B9619
1960.00 MHz
Preliminary data
Smith charts
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
7
November 21, 2014
SAW Components
SAW Filter
B9619
1960.00 MHz
Preliminary data
References
Type
B9619
Ordering code
Marking and package
Packaging
B39202B9619P810
C61157-A8-A9
F61074-V8237-Z000
L_1126
Date codes
B9619_NB.s2p, B9619_WB.s2p
S-parameters
See file header for port/pin assignment table.
Soldering profile
RoHS compatible
S_6001
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Di-
rective 2011/65/EU of the European Parliament and of the-
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
for a large variety of matching coils.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2014. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
8
November 21, 2014
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
9
November 21, 2014
相关型号：
B39202B9860P810
SAW Filter, 1 Function(s), 1960MHz, 5 Pin(s), Plastic, ROHS COMPLIANT, SMD, 5 PIN
TDK
©2020 ICPDF网 联系我们和版权申明