B39202B9815P810 [TDK]
SAW filters for mobile communications;
| 型号： | B39202B9815P810 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | SAW filters for mobile communications |
| 文件： | 总12页 (文件大小：159K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW filters for mobile
communications
Series/Type: B9815
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B39202B9825P810
Date of Withdrawal Deadline Last
Orders
Last Shipments
2016-06-30
B39202B9815P810
2015-11-20
2016-03-01
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The
addresses of our worldwide sales network are presented at www.epcos.com/sales.
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
Application
■ Low-loss 2in1 RF filter for mobile telephone
TD-SCDMA 1900 and TD-SCDMA 2100 systems
■ Usable passband:
Filter 1 (TD-SCDMA 1900): 40 MHz
Filter 2 (TD-SCDMA 2100): 15 MHz
■ Unbalanced to balanced operation for both filters
■ Impedance transformation from 50 Ω to 200 Ω for
both filters
■ Low amplitude ripple
■ No matching network required
Features
0.49
0.18
■ Package size 1.5 x1.1 x 0.4 mm3
■ Moisture Sensitive Level 3
0,39
4
1
2
8
3
7
■ RoHS compatible
■ Approx. weight 0.003g.
bottom view
10
5
■ Package for Surface Mount Technology (SMT)
■ Ni, gold-plated terminals
9
6
0.21
0.075
■ Electrostatic Sensitive Device (ESD)
side view
top view
1.5
Pin configuration
9
1
■ 1
Input [ Filter 1]
■ 4
Input [ Filter 2 ]
■ 6,7
■ 8,9
■ 2,3,5,10
Output balanced [ Filter 2 ]
Output balanced [ Filter 1 ]
Case ground
8
7
6
4
2,3,5,10
Please read cautions and warnings and
important notes at the end of this document.
2
May 3, 2011
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
Characteristics of Filter 1 (TD-SCDMA 1900)
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T
ZS
ZL
=
=
=
-30 ˚C to +85 ˚C
50 Ω
200 Ω
B9815
min.
typ.
max.
@ 25 ˚C
fC
—
1900.0
—
MHz
Center frequency
αmax
Maximum insertion attenuation
1880.0 ... 1920.0MHz
—
—
—
—
1.6
0.5
1.6
1.7
2.0
1.0
2.0
2.0
dB
dB
∆α
Amplitude ripple (p-p)
1880.0 ... 1920.0MHz
Input VSWR
1880.0 ... 1920.0MHz
Output VSWR
1880.0 ... 1920.0MHz
Group delay ripple (p-p)
1880.0 ... 1920.0MHz
Common mode rejection ratio
1880.0 ... 1920.0MHz
—
8
18
—
ns
201)
27
dB
α
Attenuation
0.0 ... 925.0MHz
925.0 ... 960.0MHz
960.0 ... 1805.0MHz
1805.0 ... 1840.0MHz
1840.0 ... 1850.0MHz
1980.0 ... 2005.0MHz
2005.0 ... 6000.0MHz
1)
28
35
28
30
32
15
28
62
63
41
35
44
29
37
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
A CMRR of 19.6dB corresponds to a phase balance of 10˚ together with an amplitude balance
of 1.0dB
Please read cautions and warnings and
important notes at the end of this document.
3
May 3, 2011
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
Maximum ratings of Filter 1 (TD-SCDMA 1900)
Operable temperature range T
Storage temperature range Tstg
–40/+85
–40/+85
5
˚C
˚C
V
DC voltage
VDC
ESD voltage
machine model, 1 pulse
VESD
501)
V
Input power at
1880.0 ... 1920.0 MHz
2010.0 ... 2025.0 MHz
PIN
PIN
10
10
dBm
dBm
effective power in the on-state,
duty cycle 4:8, 2000hours
1)
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Please read cautions and warnings and
important notes at the end of this document.
4
May 3, 2011
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
Transfer function Filter 1 (TD-SCDMA 1900)
Transfer function Filter 1 (TD-SCDMA 1900) - Wideband
Please read cautions and warnings and
important notes at the end of this document.
5
May 3, 2011
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
Smith charts Filter 1 (TD-SCDMA 1900)
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
6
May 3, 2011
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
Characteristics of Filter 2 (TD-SCDMA 2100)
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T
ZS
ZL
=
=
=
-30 ˚C to +85 ˚C
50 Ω
200 Ω
B9815
min.
typ.
max.
@ 25˚C
fC
—
2017.5
—
MHz
dB
Center frequency
αmax
Maximum insertion attenuation
2010.0 ... 2025.0 MHz
—
—
—
1.7
2.6
1.2
2.0
∆α
Amplitude ripple (p-p)
2010.0 ... 2025.0 MHz
0.5
1.5
dB
Input VSWR
2010.0 ... 2025.0 MHz
Output VSWR
2010.0 ... 2025.0 MHz
—
—
1.4
8
2.0
20
—
Group delay ripple (p-p)
2010.0 ... 2025.0 MHz
ns
Common mode rejection ratio
2010.0 ... 2025.0 MHz
181)
22
dB
α
Attenuation
0
... 1840.0 MHz
45
25
22
14
6
50
34
25
25
12
12
25
30
37
37
35
38
—
—
—
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
1840.0 ... 1935.0 MHz
1935.0 ... 1970.0 MHz
1970.0 ... 1980.0 MHz
1980.0 ... 1990.0 MHz
2045.0 ... 2085.0 MHz
2085.0 ... 2120.0 MHz
2120.0 ... 2160.0 MHz
2160.0 ... 2300.0 MHz
2300.0 ... 2700.0 MHz
2700.0 ... 2900.0 MHz
2900.0 ... 6000.0 MHz
3
22
27
35
30
30
30
1)
A CMRR of 18.0dB corresponds to a phase balance of 12˚ together with an amplitude balance
of 1.2dB
Please read cautions and warnings and
important notes at the end of this document.
7
May 3, 2011
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
Maximum ratings of Filter 2 (TD-SCDMA 2100)
Operable temperature range T
Storage temperature range Tstg
–40/+85
–40/+85
5
˚C
˚C
V
DC voltage
VDC
ESD voltage
machine model, 1 pulse
VESD
501)
V
Input power at
1880.0 ... 1920.0 MHz
2010.0 ... 2025.0 MHz
PIN
PIN
10
10
dBm
dBm
effective power in the on-state,
duty cycle 4:8, 2000hours
1)
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Please read cautions and warnings and
important notes at the end of this document.
8
May 3, 2011
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
Transfer function Filter 1 (TD-SCDMA 2100)
Transfer function Filter 1 (TD-SCDMA 2100) - Wideband
Please read cautions and warnings and
important notes at the end of this document.
9
May 3, 2011
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
Smith charts Filter 1 (TD-SCDMA 2100)
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
10 May 3, 2011
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
References
Type
B9815
Ordering code
Marking and package
Packaging
B39202B9815P810
C61157-A8-A19
F61074-V8227-Z000
L_1126
Date codes
B9815_LB_NB.s3p, B9815_LB_WB.s3p
B9815_UB_NB.s3p, B9815_UB_WB.s3p
S-parameters
see file header for port/pin assignment table
Soldering profile
RoHS compatible
S_6001
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction of the
use of certain hazardous substances in electrical and electronic
equipment. 2005/618/EC from April 18th, 2005, amending Directive
2002/95/EC of the European Parliament and of the Council for the
purposes of establishing the maximum concentration values for cer-
tain hazardous substances in electrical and electronic equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2011. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
11 May 3, 2011
SAW Components
SAW 2in1 filter
Data sheet
B9815
1900.0 / 2017.5 MHz
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Please read cautions and warnings and
important notes at the end of this document.
12 May 3, 2011
相关型号：
B39202B9860P810
SAW Filter, 1 Function(s), 1960MHz, 5 Pin(s), Plastic, ROHS COMPLIANT, SMD, 5 PIN
TDK
©2020 ICPDF网 联系我们和版权申明