WFDE [SYSTEMSENSOR]
Waterfl ow Detector; Waterfl流检测器型号: | WFDE |
厂家: | SYSTEMSENSOR ADVANCED IDEAS. |
描述: | Waterfl ow Detector |
文件: | 总2页 (文件大小:171K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
WFDE Series
Waterflow Detector
System Sensor’s WFDE series is compatible with pipe
diameters ranging from 50mm through 200mm and
can be mounted in a vertical or horizontal position.
Robust Construction. The WFDE series consists of a rugged, IP54
rated enclosure. Designed for both indoor and outdoor use, the
WFDE series operates across a wide temperature range, from 0°C to
68°C (32°F to 155°F).
Features
• Compliant with Construction Products Directive
• EC Certificate Number 0786-CPD-40151
• WFD30-2E models install in 50.8mm (2”) hole sizes
• IP54 rated enclosure
Reliable Performance. WFDE models are equipped with tamper-
resistant cover screws to prevent unauthorized entry. Inside, two sets
of SPDT (Form C) synchronized switches are enclosed in a durable
terminal block to ensure reliable performance.
• Sealed retard mechanism assures that the retard is not
contaminated by dust and dirt when the cover is removed
False Alarm Immunity. The WFDE series incorporates a
mechanical retard feature, which minimizes the risk of false alarm
due to pressure surges or air trapped in the sprinkler system. In
addition, the mechanical retard’s unique sealed design is immune
to dust and other contaminants.
• Visual switch activation permits installer to accurately set the retard
even under extremely noisy conditions
• Rugged, dual SPDT switches are enclosed in a durable terminal
block for added strength
• 100% synchronization activates both alarm panel and local bell
simultaneously
Simplified Operation. The WFDE series is designed to simplify
installation. Two conduit openings permit easy attachment to the
local alarm system. The retard mechanism and dual SPDT switches
are field-replaceable.
Agency Listings
Scientific Services
Laboratory
VdS
TE83724
G4940006
1Z0A7.AH
afp-836
0786
Waterflow Detector Specifications
Engineering Specifications
Vane-type System Sensor WFDE series waterflow detectors shall be installed on system piping as designated on the drawings and/or as specified herein.
Detectors shall mount on any clear pipe span of the appropriate nominal size, either a vertical upflow or horizontal run, at least 15 cm (6 in.) from any
fittings, which may change water direction, flow rate or pipe diameter, or no closer than 61 cm (24 in.) from a valve or drain. The detector shall respond
to waterflow in the specified direction after a preset time delay, which is field adjustable. The delay mechanism shall be a sealed mechanical pneumatic
unit with visual indication of actuation. The actuation mechanism shall include a polyethylene vane inserted through a hole in the pipe and connected
by a mechanical linkage to the delay mechanism. Outputs shall consist of dual SPDT switches (Form C contacts). Two conduit entrances (one of which is
a knockout type) for standard fittings of commonly used electrical conduit shall be provided on the detectors. A grounding provision is provided. WFDE
waterflow detectors shall be approved by Factory Mutual, LPC, VdS and SSL.
Standard Specifications
Static Pressure Rating
LPC: 17.25 BAR (250 PSI)
VdS: PN16 (16 BAR, 232 PSI)
Triggering Threshold Bandwidth (Flow Rate)
Contact Ratings; Two sets of SPDT (Form C)
30–57 liters/minute
10.0 A @ 125/250 VAC
2.5 A @ 24 VDC
Conduit Entrances
Two openings 22.2mm (.875 in.) diameter. One open, one knock-out type
Operating Temperature Range
Enclosure Rating
0°C to 68°C (32°F to 155°F)
IP54
Shipping Weight
WFD20E: 1.85 kg (4.08 lb.); WFD25E: 1.85 kg (4.08 lb.); WFD30-2E: 2.05 kg (4.53 lb.);
WFD40E: 2.36 kg (5.20 lb.); WFD60E: 3.03 kg (6.68 lb.); WFD80E: 3.45 kg (7.70 lb.)
U.S. Patent Numbers
Warranty
5,213,205; 4,782,333; 3,845,259
3 Years
Compatible Pipe
WFDE Field Wiring Diagram
Nominal Pipe O.D.
(mm)
Wall Thickness
(mm)
Ref. Pipe
Size mm
(in.)
Model
A
B
B
A
LPC
VdS
LPC
3.6
3.6
4.0
4.5
5.0
6.3
VdS
NOTE: Common and B connections will
close when vane is deflected, i.e.,
when water is flowing. Dual switches
permit applications to be combined
on a single detector.
SWITCH 1
SWITCH 2
WFD20E
WFD25E
50 (2)
60.3
60.3
2.3/2.9
2.6/2.9
2.9/3.2
3.2/3.6
4.0/4.5
4.5/5.9
SWITCH SCHEMATIC
“READY” STATE
–CAUTION–
A
65 (2½)
76.0
76.1
ROUTE WIRING
AWAY FROM
SHARP EDGES
COM
B
&
COMPONENTS
WFD30-2E 80 (3)
88.8
88.9
T16-0010-XXX
CONTACT RATINGS
WFD40E
WFD60E
WFD80E
100 (4)
150 (6)
200 (8)
114.1
165.1
219.1
114.3
168.3
219.1
125/250 VAC
24 VDC
10 AMPS
2.5 AMPS
WFDE
WFDE
B
B
B
B
Shipping Weight
To nonsilenceable
initiating zone of
listed FACP
end-of-line resistor
COM
COM
COM
COM
WFD20E
WFD30-2E WFD40E
WFD60E
WFD80E
Model
WFD25E
Typical FACP Connection
1.85 kg
2.05 kg
2.36 kg
3.03 kg
3.45 kg
(4.08 lbs.)
(4.53 lbs.)
(5.20 lbs.)
(6.68 lbs.)
(7.70 lbs.)
B
To power source
compatible
with bell
local
bell
COM
Break wire as shown for
supervision of connection.
DO NOT allow stripped wire
leads to extend beyond
switch housing. DO NOT
loop wires.
Delay Adjustment Dial
WFDE
switch assembly
Typical Local Bell Connection
Delay
adjustment
dial
0
Ordering Information
Model
Pipe Size
Hole Size
WFD20E
WFD25E
WFD30-2E
WFD40E
WFD60E
WFD80E
50mm (2”)
65mm (2½”)
80mm (3”)
100mm (4”)
150mm (6”)
200mm (8”)
31.8mm (1¼”)
31.8mm (1¼”)
50.8mm (2”)
50.8mm (2”)
50.8mm (2”)
50.8mm (2”)
1 5
Dial setting
5
10
15
20
25
0
Dial setting equals delay in seconds. Reference only.
©2006 System Sensor.
3825 Ohio Avenue • St. Charles, IL 60174
Phone: 800-SENSOR2 • Fax: 630-377-6495
Product specifications subject to change without notice. Visit systemsensor.com for
current product information, including the latest version of this data sheet.
A05-0243-007 • 7/06 • #1679
相关型号:
WFD_U4N60
群方电子有限公司, 我公司代理经销商FAIRCHTLD(仙童),万裕,威士顿,EVERLTGHT,UTC,ON,IR,TI,MPS等品牌的元器件IC,热忱为广大生产商提供服务,欢迎前来洽谈订购! 联系人: 乌小姐 TEL: 0755-23051325 QQ: 2355819029 陈小姐 TEL: 0755-28197007 QQ: 2355819022 赖小姐 TEL: 0755-83722630 QQ: 2355819025 张先生 TEL: 0755-23574585 QQ: 2355819014 FAX:0755-28199449 邮箱:2355819029@qq.com 公司网址:http://qunfangdianzi3.ic37.com/ 公司地址:深圳市福田区中航路国利大厦A座1008室
ETC
©2020 ICPDF网 联系我们和版权申明