STP04C596XTTR [STMICROELECTRONICS]
LED DISPLAY DRIVER, PDSO16, TSSOP-16;![STP04C596XTTR](http://pdffile.icpdf.com/pdf2/p00304/img/icpdf/STP04C596MTR_1837276_icpdf.jpg)
型号: | STP04C596XTTR |
厂家: | ![]() |
描述: | LED DISPLAY DRIVER, PDSO16, TSSOP-16 驱动 光电二极管 接口集成电路 |
文件: | 总24页 (文件大小:411K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
STP04CM596
4-Bit constant current for power-LED
LED sink driver
General features
■ 4 constant current output channels
■ Adjustable output current through one external
resistor
■ Serial data IN/parallel data OUT
SO-14
Dip-14
■ Serial OUT change state on the failing edges of
clock
■ Four outputs current: 80-500mA
■ 25MHz clock frequency
■ Available in high thermal TSSOP exposed pad.
TSSOP16
(Exposed pad)
Description
The STP04CM596 guarantees 16V output driving
capability, allowing users to connect more LEDs in
series. The high clock frequency, 25 MHz, also
satisfies the system requirements which include
high volume data transmission.
The STP04CM596 is a high-power LED Driver
and 4-bit shift register designed for PowerLED
applications.
The STP04CM596 contains a 4-bit serial IN,
parallel OUT shift register that feeds a 4-bit D-
type storage register. In the output stage, four
regulated current sources were designed to
provide 80-500mA constant current to drive the
high powered LEDs.
The STP04CM596 is well suited for very high
brightness displays and special lighting
applications.
The STP04CM596 is offered in DIP-14, SO-14
and TSSOP16 Exposed Pad packages.
Order codes
Part Number
Package
DIP-24
Packaging
STP04C596B1R
STP04C596M
25 parts per tube
50 parts per tube
2500 parts per reel
2500 parts per reel
SO-24 (Tube)
SO-24 (Tape & Reel)
STP04C596MTR
STP04C596XTTR
TSSOP24 Exposed-Pad (Tape & Reel)
May 2006
Rev 3
1/24
www.st.com
24
Contents
STP04CM596
Contents
1
2
Internal schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
2.2
Pin connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1
3.2
Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Equivalent circuit of inputs and outputs . . . . . . . . . . . . . . . . . . . . . . . . . 9
Timing diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5
6
7
8
9
10
2/24
STP04CM596
Internal schematic
1
Internal schematic
Figure 1. Block diagram
3/24
Pin settings
STP04CM596
2
Pin settings
2.1
Pin connection
Figure 2. Pin connection
DIP-14/SO-14
TSSOP16 (Exposed pad)
2.2
Pin description
Table 1. Pin description
DIP-14 and SO-14 Pin N°
TSSOP16 Pin N°
Symbol
Name and function
1
1, 2
GND
Ground Terminal
2
3
3
SDI
CLK
Serial data input terminal
Clock input terminal
Latch input terminal
Output terminal
4
4
5
6
LE
5
OUT 0
OUT 1
N.C.
6
7
Output terminal
7, 8
9
8, 9, 12
10
Not Connected
OUT 2
OUT 3
OE
Output terminal
10
11
11
Output terminal
13
Output Enable input
terminal (active low)
12
13
14
15
SDO
Serial data out terminal
R-EXT
Constant Current
programming
14
16
VDD
5V Supply voltage
terminal
4/24
STP04CM596
Maximum rating
3
Maximum rating
Stressing the device above the rating listed in the “Absolute Maximum Ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
Table 2. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VDD
Supply Voltage
Output Voltage
Output Current
Input Voltage
0 to 7
V
VO
IO
-0.5 to 16
500
V
mA
V
VI
-0.4 to VDD+0.4
2000
IGND
fCLK
TOPR
TSTG
GND Terminal Current
Clock Frequency
mA
MHz
°C
25
Operating Temperature Range
Storage Temperature Range
-40 to +125
-55 to +150
°C
3.1
Thermal data
Table 3. Thermal data
Symbol
Parameter
DIP-14
SO-14
105 (2)
TSSOP16
Unit
70 (1)
37.5 (3)
RthJA
Thermal Resistance Junction-ambient
°C/W
1. 1W of dissipated power, mounted on the board
2. 1W of dissipated power ,mounted on SM PCB1 SGS board
3. Using the PCB Multi-Layer JEDEC Standard Test Boards
5/24
Maximum rating
STP04CM596
3.2
Recommended operating conditions
Table 4. Recommended operating conditions
Symbol
Parameter
Supply Voltage
Test conditions
Min
Typ
Max
Unit
VDD
3.3
5.0
5.5
V
VO
IO
Output Voltage
Output Current
Output Current
Output Current
Input Voltage
16.0
500
V
mA
mA
mA
V
OUTn VDD = 5V
Serial-OUT
80
IOH
+1
IOL
Serial-OUT
-1
VIH
0.7VDD
-0.3
20
VDD+0.3
0.3VDD
VIL
Input Voltage
V
twLAT
twCLK
twEN
LE Pulse Width
CLK Pulse Width
OE Pulse Width
VDD = 3.0 to 3.6V
6.5
7.0
100
3.3
1.5
5
ns
20
ns
400
20
ns
tSETUP(D) Setup Time for DATA
ns
tHOLD(D)
tSETUP(L)
tHOLD(E)
fCLK
Hold Time for DATA
Setup Time for LATCH
Hold Time for ENABLE
Clock Frequency
15
ns
15
ns
60
38
ns
Cascade operation (1)
25
MHz
°C
TOPR
Operating Temperature
Range
-40
+125
1. If multiple devices are cascaded, it may not be possible achieve the maximum data transfer. Please
consider the timing conditions carefully.
6/24
STP04CM596
Electrical characteristics
4
Electrical characteristics
Table 5. Current accuracy
Output voltage
Current accuracy
Between bits Between ICs
TYP. 1ꢀ 6ꢀ
Output current
≥ 0.7V
80 to 500 mA
Table 6. Electrical characteristics (V = 5V, T = 25°C, unless otherwise specified.)
DD
A
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VIH
0.7VDD
VDD
Input Voltage High Level
Input Voltage Low Level
Output Leakage Current
V
VIL
0.3VDD
10
GND
V
IOH
VOH = 16 V
µA
Output Voltage (Serial-
OUT)
VOL
VOH
IOL = 1mA
0.4
V
V
Output Voltage (Serial-
OUT)
IOH = -1mA
VDD-0.4V
IOL1
IOL2
VO = 0.7VREXT = 910 Ω
VO = 0.7VREXT = 160 Ω
VO = 0.7VREXT = 910 Ω
VO = 0.7VREXT = 160 Ω
77
82
500
1
87
530
3
mA
mA
ꢀ
Output Current
470
∆IOL1
∆IOL2
RSIN(up)
Output Current Error
between bit (All Output
ON)
0.5
300
3
ꢀ
Pull-up Resistor
150
100
600
KΩ
RSIN(down
Pull-down Resistor
200
0.3
5.2
8.0
5.6
8.3
400
0.6
8.0
12
KΩ
)
REXT = OPEN
OUT 0 to 3 = OFF
IDD(OFF1)
IDD(OFF2)
IDD(OFF3)
IDD(ON1)
IDD(ON2)
REXT = 470 Ω
OUT 0 to 3 = OFF
Supply Current (OFF)
Supply Current (ON)
REXT = 250 Ω
OUT 0 to 3 = OFF
mA
REXT = 470 Ω
OUT 0 to 3 = ON
8.0
12
REXT = 250 Ω
OUT 0 to 3 = ON
7/24
Electrical characteristics
STP04CM596
Table 7. Switching characteristics (V =5V, T = 25°C, unless otherwise specified.)
DD
Symbol
Parameter
Test conditions
Min
Typ
Max
Unit
tPLH1 Propagation Delay Time,
CLK-OUTn, LE = H, OE = L
V
DD = 5 VVIH = VDD
100
160
ns
VIL = GNDCL = 13pF
IO = 40mAVL = 3 V
REXT = 470 ΩRL = 65 Ω
tPLH2 Propagation Delay Time,
LE-OUTn, OE = L
100
90
30
40
35
40
30
150
140
40
ns
ns
ns
ns
ns
ns
ns
tPLH3 Propagation Delay Time,
OE-OUTn, LE = H
tPLH
Propagation Delay Time,
CLK-SDO
tPHL1 Propagation Delay Time,
CLK-OUTn, LE = H, OE = L
60
tPHL2 Propagation Delay Time,
LE -OUTn, OE = L
50
tPHL3 Propagation Delay Time,
OE-OUTn, LE = H
70
tPHL
Propagation Delay Time,
CLK-SDO
40
Output Rise Time (1)
Output Fall Time (1)
tr
tf
VO = 1.6 V, RL = 1 Ω
REXT = 470 Ω
300
55
400
80
ns
ns
1. If multiple devices are cascaded, it may not be possible achieve the maximum data transfer. Please
consider the timing conditions carefully.
8/24
STP04CM596
Equivalent circuit of inputs and outputs
5
Equivalent circuit of inputs and outputs
Figure 3. OE Terminal
Figure 4. LE Terminal
Figure 5. CLK, SDI Terminal
9/24
Equivalent circuit of inputs and outputs
Figure 6. SDO Terminal
STP04CM596
10/24
STP04CM596
Timing diagrams
6
Timing diagrams
Figure 7. Timing diagram
Note:
The latches circuit holds data when the LE terminal is Low.
1
2
3
When the LE terminal is at a High level, the latch circuit holds the data it passes from the
input to the output.
When the OE terminal is at a Low level, the output terminals OUT0 to OUT3 respond to the
data, either ON or OFF.
When the OE terminal is at a High level, it switches off all the data on the output terminal.
11/24
Timing diagrams
Figure 8. Clock, serial-IN, serial-OUT
STP04CM596
12/24
STP04CM596
Figure 9. Clock, serial-IN, latch, enable, outputs
Timing diagrams
Figure 10. Outputs
13/24
Test circuit
STP04CM596
7
Test circuit
Figure 11. DC characteristic
Figure 12. AC characteristic
14/24
STP04CM596
Typical characteristics
8
Typical characteristics
Figure 13. Output current-R
resistor Figure 14. Output current vs. dropout
voltage
EXT
Figure 15. Output current vs ∆I (%)
OL
15/24
Typical characteristics
Figure 16. Blue powerLED typ. application circuit
STP04CM596
Note:
V will be determined by the V of the LEDs
L F
Table 8. Typ. output waveform with blue powerLEDs
16/24
STP04CM596
Package mechanical data
9
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
17/24
Package mechanical data
STP04CM596
Table 9. DIP-14 Mechanical data
mm.
Typ
inch
Typ
Dim.
Min
Max
Min
Max
a1
B
b
0.51
1.39
0.020
0.055
1.65
0.065
0.5
0.020
0.010
b1
D
E
e
0.25
20
0.787
8.5
2.54
15.24
0.335
0.100
0.600
e3
F
7.1
5.1
0.280
0.201
I
L
3.3
0.130
Z
1.27
2.54
0.050
0.100
Figure 17. Package dimensions
18/24
STP04CM596
Package mechanical data
Table 10. SO-14 Mechanical data
mm.
Typ
inch
Dim.
Min
Max
Min
Typ
Max
A
a1
a2
b
1.75
0.2
0.068
0.007
0.064
0.018
0.010
0.1
0.003
1.65
0.46
0.25
0.35
0.19
0.013
0.007
b1
C
0.5
0.019
c1
D
45° (typ.)
0.336
8.55
5.8
8.75
6.2
0.344
0.244
E
0.228
e
1.27
7.62
0.050
0.300
e3
F
3.8
4.6
0.5
4.0
5.3
0.149
0.181
0.019
0.157
0.208
0.050
0.026
G
L
1.27
0.68
M
S
8° (max.)
Figure 18. Package dimensions
19/24
Package mechanical data
STP04CM596
Table 11. TSSOP16 (Exposed pad) Mechanical data
mm.
Typ
inch
Typ
Dim.
Min
Max
Min
Max
A1
A2
b
0.05
0.8
0.15
1.05
0.30
0.20
5.1
0.002
0.031
0.007
0.004
0.193
0.244
0.169
0.004
0.039
0.006
0.041
0.012
0.0079
0.201
0.260
0.176
1
0.19
0.09
4.9
c
D
E
5
6.4
0.197
0.252
6.2
6.6
E1
e
4.3
4.4
4.48
0.173
0.65 BSC
0.0256 BSC
K
0°
8°
0°
8°
L
0.45
0.60
0.75
0.018
0.024
0.030
Figure 19. Package dimensions
20/24
STP04CM596
Package mechanical data
Table 12. Tape and reel SO-14
mm.
Typ
inch
Typ
Dim.
Min
Max
Min
Max
A
C
330
12.992
0.519
12.8
20.2
60
13.2
0.504
0.795
2.362
D
N
T
22.4
6.6
9.2
2.3
4.1
8.1
0.882
0.260
0.362
0.090
0.161
0.319
Ao
Bo
Ko
Po
P
6.4
9
0.252
0.354
0.082
0.153
0.311
2.1
3.9
7.9
Figure 20. Tape and reel dimensions
21/24
Package mechanical data
STP04CM596
Table 13. TSSOP16 Tape and reel
mm.
Typ
inch
Typ
Dim.
Min
Max
Min
Max
A
C
330
12.992
0.519
12.8
20.2
60
13.2
0.504
0.795
2.362
D
N
T
22.4
6.9
5.5
1.8
4.1
8.1
0.882
0.272
0.217
0.071
0.161
0.319
Ao
Bo
Ko
Po
P
6.7
5.3
1.6
3.9
7.9
0.264
0.209
0.063
0.153
0.311
Figure 21. Tape and reel dimensions
22/24
STP04CM596
Revision history
10
Revision history
Table 14. Revision history
Date
Revision
Changes
26-Oct-2006
05-Apr-2006
23-May-2006
1
2
3
Initial release.
New template
Updated packaging information
23/24
STP04CM596
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
24/24
相关型号:
©2020 ICPDF网 联系我们和版权申明