STP04CM05MTR [STMICROELECTRONICS]
4-bit constant current power-LED sink driver; 4位恒流电源, LED驱动器型号: | STP04CM05MTR |
厂家: | ST |
描述: | 4-bit constant current power-LED sink driver |
文件: | 总24页 (文件大小:622K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
STP04CM05
4-bit constant current power-LED sink driver
Features
■ 4 constant current output channels
■ Adjustable output current through one external
resistor
■ Can be driven by a 3.3 V microcontroller
■ Serial data IN/parallel data OUT
■ Output current: 80-400 mA
SO-14
Dip-14
■ 20 V of output driving capability
■ 30 MHz clock frequency
TSSOP16
(Exposed pad)
■ UVLO (under voltage lockout) and
POR (power ON reset)
■ TSD, thermal shutdown, output off when
junction temperature exceeds limit
■ Operating free-air temperature range -40 to
125 ºC
■ ESD protection 2.5 kV HBM, 200 V MM
■ Available in high thermal TSSOP exposed pad.
The STP04CM05 guarantees 20 V output driving
capability, allowing users to connect more LEDs in
series. The high clock frequency, 30 MHz, also
satisfies the system requirements which include
high volume data transmission.
Description
The STP04CM05 is a high-power LED driver and
4-bit shift register designed for Power-LED
applications.
The STP04CM05 is well suited for very high
brightness displays and special lighting
applications.
The STP04CM05 contains a 4-bit serial IN,
parallel OUT shift register that feeds a 4-bit
D-type storage register. In the output stage, four
regulated current sources were designed to
provide 80-400 mA constant current to drive high
power LEDs.
The STP04CM05 is offered in DIP-14, SO-14 and
TSSOP16 exposed pad packages.
Table 1.
Device summary
Order codes
Package
Packaging
STP04CM05B1R
STP04CM05MTR
STP04CM05XTTR
DIP-14
25 parts per tube
SO-14 (tape and reel)
2500 parts per reel
2500 parts per reel
TSSOP16 exposed-pad (tape and reel)
June 2008
Rev 4
1/24
www.st.com
24
Contents
STP04CM05
Contents
1
2
Internal schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
2.2
Pin connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1
3.2
Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Equivalent circuit of inputs and outputs . . . . . . . . . . . . . . . . . . . . . . . . . 9
Timing diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5
6
7
8
9
10
2/24
STP04CM05
Internal schematic
1
Internal schematic
Figure 1.
Block diagram
3/24
Pin settings
STP04CM05
2
Pin settings
2.1
Pin connection
Figure 2.
Pin connection
DIP-14 / SO-14
TSSOP16 (exposed pad)
Note:
The Exposed-pad is electrically not connected
2.2
Pin description
Table 2.
Pin description
DIP-14 and SO-14 pin N°
TSSOP16 pin N°
Symbol
Name and function
1
2
1, 2
GND
SDI
Ground terminal
Serial data input terminal
Clock input terminal
Latch input terminal
Output terminal
3
3
4
CLK
4
5
LE
5
6
7
OUT 0
OUT 1
N.C.
6
Output terminal
7, 8
9
8, 9, 12
10
Not connected
OUT 2
OUT 3
Output terminal
10
11
Output terminal
Output enable input terminal
(active low)
11
13
OE
12
13
14
14
15
16
SDO
R-EXT
VDD
Serial data out terminal
Constant current programming
5 V supply voltage terminal
4/24
STP04CM05
Maximum rating
3
Maximum rating
Stressing the device above the rating listed in the “absolute maximum ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
Table 3.
Symbol
Absolute maximum ratings
Parameter
Value
Unit
VDD
VO
Supply voltage
0 to 7
-0.5 to 20
500
V
V
Output voltage
IO
Output current
mA
V
VI
Input voltage
-0.4 to VDD+0.4
2000
IGND
fCLK
TOPR
TSTG
GND terminal current
Clock frequency
mA
MHz
°C
50
Operating temperature range
Storage temperature range
-40 to +125
-55 to +150
°C
3.1
Thermal data
Table 4.
Symbol
Thermal data
Parameter
DIP-14
SO-14
105 (2)
TSSOP16
Unit
RthJA
Thermal resistance junction-ambient
70 (1)
37.5 (3)
°C/W
1. 1 W of dissipated power, mounted on the board
2. 1 W of dissipated power, mounted on SM PCB1 SGS board
3. Using the PCB Multi-Layer JEDEC Standard test boards
5/24
Maximum rating
STP04CM05
3.2
Recommended operating conditions
Table 5.
Symbol
Recommended operating conditions
Parameter
Supply voltage
Test conditions
Min
Typ
Max
Unit
VDD
VO
IO
3.3
5.0
5.5
19
V
V
Output voltage
Output current
Output current
Output current
Input voltage
Input voltage
OUTn VDD = 5 V
Serial-OUT
80
400
mA
mA
mA
V
IOH
IOL
VIH
VIL
+1
Serial-OUT
-1
0.7VDD
-0.3
VDD+0.3
0.3VDD
V
V
DD = 5 V,
80
50
IO = 350 mA
twEN
OE pulse width
ns
VDD = 3.3 V,
250
150
IO = 350 mA
twLAT
twCLK
LE pulse width
8
4
ns
ns
CLK pulse width
8.5
8.5
8.5
8.5
8.5
7.5
7.5
7.5
7.0
7.0
tSETUP(D) Setup time for DATA
ns
VDD = 3.0 to 3.6 V
tHOLD(D)
tSETUP(L)
tHOLD(E)
fCLK
Hold time for DATA
Setup time for LATCH
Hold time for ENABLE
Clock frequency
ns
ns
ns
Cascade operation (1)
30
MHz
Operating temperature
range
TOPR
-40
+125
°C
1. If multiple devices are cascaded, it may not be possible achieve the maximum data transfer. Please
consider the timing conditions carefully.
6/24
STP04CM05
Electrical characteristics
4
Electrical characteristics
Table 6.
Current accuracy
Current accuracy
Output voltage
Output current
Between bits
Between ICs
≥ 1.4 V
Typ. 1 %
6 %
80 to 400 mA
Table 7.
Electrical characteristics
(V = 3.3 to 5 V, T = 25°C, unless otherwise specified.)
DD
A
Symbol
Parameter
Test conditions
Min
Typ
Max
Unit
VIH
VIL
IOH
Input voltage high level
Input voltage low level
0.7 VDD
GND
VDD
0.3 VDD
10
V
V
Output leakage current VOH = 19 V
µA
Output voltage
IOL = 1 mA
VOL
VOH
0.4
V
V
(Serial-OUT)
Output voltage
I
OH = -1 mA
VDD-0.4V
(Serial-OUT)
IOL1
IOL2
VO = 0.3 VREXT = 980 Ω
VO = 1.2 VREXT = 190 Ω
75.2
376
80
84.8
424
mA
mA
Output current
400
VO = 0.3 VREXT = 980 Ω
IO = 80 mA
∆IOL1
∆IOL2
‘
1
1
1.5
1.5
%
%
Output current error
between bit (All Output
ON)
VO = 1.2 VREXT = 190 Ω
IO = 400 mA
RSIN(up) Pull-up resistor
150
100
300
200
600
400
KΩ
KΩ
RSIN(down) Pull-down resistor
R
EXT = OPEN
IDD(OFF1)
1
1.5
6
OUT 0 to 3 = OFF
REXT = 980 Ω
OUT 0 to 3 = OFF
IDD(OFF2) Supply current (OFF)
IDD(OFF3)
3.8
14
REXT = 190 Ω
OUT 0 to 3 = OFF
18.5
6.0
19
mA
R
EXT = 980 Ω
IDD(ON1)
4.0
14.5
OUT 0 to 3 = ON
Supply current (ON)
IDD(ON2)
REXT = 190 Ω
OUT 0 to 3 = ON
7/24
Electrical characteristics
STP04CM05
Max Unit
Table 8.
Switching characteristics
(V = 3.3 to 5 V, T = 25 °C, unless otherwise specified.)
DD
Symbol
Parameter
Test conditions
Min
Typ
VDD = 3.3 V
VDD = 5 V
VDD = 3.3 V
VDD = 5 V
VDD = 3.3 V
VDD = 5 V
VDD = 3.3 V
VDD = 5 V
82
45
81
43
147
50
8
130
ns
Propagation delay time,
CLK-OUTn, LE = H, /OE = L
tPLH1
61
135
ns
62
Propagation delay time,
LE-OUTn, /OE = L
tPLH2
tPLH3
tPLH
250
ns
76
Propagation delay time,
/OE-OUTn, LE = H
12
ns
8
Propagation delay time,
CLK-SDO
6
Propagation delay time,
tPHL1 CLK-OUTn, LE = H,
V
DD = 3.3 V
29
42
RL = 5.0 Ω
CL = 10 pF
IO = 350 mA
Rext = 224 Ω
VL = 3.0 V
ns
VDD = 5 V
23
32
/OE = L
VDD = 3.3 V
VDD = 5 V
33
31
16
12
9
60
ns
47
Propagation delay time,
LE-OUTn, /OE = L
tPHL2
tPHL3
tPHL
VDD = 3.3 V
VDD = 5 V
22
ns
16
Propagation delay time,
/OE-OUTn, LE = H
VDD = 3.3 V
VDD = 5 V
13
ns
9
Propagation delay time,
CLK-SDO
6.5
85
Output rise time
10~90% of voltage
waveform
VDD = 3.3 V
135
tON
ns
VDD = 5 V
VDD = 3.3 V
VDD = 5 V
50
6.5
5
76
Output fall time
90~10% of voltage
waveform
9
tOFF
ns
7
tr
tf
CLK rise time (1)
CLK fall time (1)
5000
5000
ns
ns
VO = 5.0 V
Rext = 224 Ω
1. In order to achieve high cascade data transfer, please consider tr/tf timings carefully.
8/24
STP04CM05
Equivalent circuit of inputs and outputs
5
Equivalent circuit of inputs and outputs
Figure 3.
Figure 4.
Figure 5.
OE terminal
LE terminal
CLK, SDI terminal
9/24
Equivalent circuit of inputs and outputs
Figure 6. SDO terminal
STP04CM05
10/24
STP04CM05
Timing diagrams
6
Timing diagrams
Figure 7.
Timing diagram
OFF
ON
OFF
ON
OFF
ON
OFF
ON
Note:
1
The latches circuit holds data when the LE terminal is low.
When the LE terminal is at a high level, the latch circuit holds the data it passes from the
input to the output.
2
3
When the OE terminal is at a low level, the output terminals OUT0 to OUT3 respond to the
data, either ON or OFF.
When the OE terminal is at a high level, it switches off all the data on the output terminal.
11/24
Timing diagrams
Figure 8.
STP04CM05
Clock, serial-in, serial-out
12/24
STP04CM05
Figure 9.
Timing diagrams
Clock, serial-in, latch, enable, outputs
Figure 10. Outputs
13/24
Test circuit
STP04CM05
7
Test circuit
Figure 11. DC characteristic
Figure 12. AC characteristic
14/24
STP04CM05
Typical characteristics
8
Typical characteristics
Figure 13. Output current-R
resistor Figure 14. Output current vs
EXT
dropout voltage
1400
1200
1000
800
600
400
200
0
1800
Avg @ 3.3V
Avg @ 5.0V
1600
Temp. = 25°C
Vdd = 5.0V
Vdrop = from 0.3V to 1.2V
Iset = 50mA; 80mA; 100mA; 150mA; 350mA; 400mA;
1400
1200
1000
800
600
400
200
0
Temp. = 25°C
Vdd = 3.3V; 5.0V
0
100
200
300
400
500
600
0
50 100 150 200 250 300 350 400 450
Iset (mA)
Ouput Currnt (mA)
Figure 15. Output current vs ± ∆I (%)
OL
1000
100
10
1
0
0.2
0.4
0.6
0.8
∆
IoL %
15/24
Typical characteristics
Figure 16. Four power-LED typ. application circuit
STP04CM05
3.3 to 5V
0.3 to 1.4V
f = 0 to 100kHz
Note:
V will be determined by the V of the LEDs
L F
Figure 17. Typical output waveform
Note:
Conditions: T = 25 C ,VDD = 5 V ,VL = 5 V, Rext = 227 Ω, LED = Lumix LXHL TW01
A
16/24
STP04CM05
Package mechanical data
9
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
17/24
Package mechanical data
STP04CM05
Table 9.
Dim.
DIP-14 mechanical data
mm.
Typ
inch
Typ
Min
Max
Min
Max
a1
B
b
0.51
1.39
0.020
0.055
1.65
0.065
0.5
0.020
0.010
b1
D
E
e
0.25
20
0.787
8.5
2.54
15.24
0.335
0.100
0.600
e3
F
7.1
5.1
0.280
0.201
I
L
3.3
0.130
Z
1.27
2.54
0.050
0.100
Figure 18. Package dimensions
18/24
STP04CM05
Package mechanical data
Table 10. SO-14 mechanical data
mm.
inch
Dim.
Min
Typ
Max
Min
Typ
Max
A
a1
a2
b
1.75
0.2
0.068
0.007
0.064
0.018
0.010
0.1
0.003
1.65
0.46
0.25
0.35
0.19
0.013
0.007
b1
C
0.5
0.019
c1
D
45° (typ.)
8.55
5.8
8.75
6.2
0.336
0.228
0.344
0.244
E
e
1.27
7.62
0.050
0.300
e3
F
3.8
4.6
0.5
4.0
5.3
0.149
0.181
0.019
0.157
0.208
0.050
0.026
G
L
1.27
0.68
M
S
8° (max.)
Figure 19. Package dimensions
19/24
Package mechanical data
Figure 20. TSSOP16 exposed pad mechanical data
STP04CM05
TSSOP16 EXPOSED PAD MECHANICAL DATA
mm.
TYP
inch
TYP.
DIM.
MIN.
MAX.
MIN.
MAX.
A
A1
A2
b
1.2
0.15
1.05
0.30
0.20
5.1
0.047
0.006
0.041
0.012
0.0089
0.201
0.004
0.039
0.8
0.19
0.09
4.9
1
5
0.031
0.007
0.004
0.193
0.067
0.244
0.169
0.059
c
D
0.197
D1
E
1.7
6.2
6.4
4.4
6.6
4.5
0.252
0.173
0.260
0.177
E1
E2
e
4.3
1.5
0.65
0.60
0.0256
0.024
K
0°
8°
0°
8°
L
0.45
0.75
0.018
0.030
7419276A
20/24
STP04CM05
Package mechanical data
Table 11. Tape and reel SO-14
mm.
Typ
inch
Typ
Dim.
Min
Max
Min
Max
A
C
330
12.992
0.519
12.8
20.2
60
13.2
0.504
0.795
2.362
D
N
T
22.4
6.6
9.2
2.3
4.1
8.1
0.882
0.260
0.362
0.090
0.161
0.319
Ao
Bo
Ko
Po
P
6.4
9
0.252
0.354
0.082
0.153
0.311
2.1
3.9
7.9
Figure 21. Tape and reel dimensions
21/24
Package mechanical data
STP04CM05
Table 12. TSSOP16 tape and reel
mm.
Typ
inch
Typ
Dim.
Min
Max
Min
Max
A
C
330
12.992
0.519
12.8
20.2
60
13.2
0.504
0.795
2.362
D
N
T
22.4
6.9
5.5
1.8
4.1
8.1
0.882
0.272
0.217
0.071
0.161
0.319
Ao
Bo
Ko
Po
P
6.7
5.3
1.6
3.9
7.9
0.264
0.209
0.063
0.153
0.311
Figure 22. Tape and reel dimensions
22/24
STP04CM05
Revision history
10
Revision history
Table 13. Document revision history
Date
Revision
Changes
26-Nov-2007
1
Initial release
Added: Figure 15 on page 15 and Figure 17 on page 16,
Updated: Table 8 on page 8.
16-Jan-2008
2
12-Mar-2008
23-Jun-2008
3
4
Updated: Figure 8 on page 12.
Updated: Table 1 on page 1, Figure 20 on page 20.
23/24
STP04CM05
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
24/24
相关型号:
©2020 ICPDF网 联系我们和版权申明